Slick 60's

It's about time to start tearing down my f100 to swap in my new motor and front IFS. My stock 223, tranny, front suspension parts, steering column, etc will all be available. Everything is still currently together and the 223 is running. The motor has a rebuilt carb, recent tune up, new fuel pump, and the starter has been rebuilt. The tranny shifts through all the gears but needs a new clutch. I recently replaced all the shifter bushings and the collar on the steering column.

I'm thinking around $300 for the motor and transmission. If some one is interested in the column, front suspension, or other parts we can work on a price for those as well. Located in the North Atlanta area. You can come hear the motor run before it is pulled if local or I can take videos of it starting and running.

I sent you a PM

So, where in "North Atlanta" could I find you?

Robert

Day 2 wrote:So, where in "North Atlanta" could I find you?

Robert

Western Forsyth County.

Ah, the good ole times I could tell you about Cumming....gotta lotta friends there. I used to live over in Fulton County {now Milton}on Hopewell Rd. We sold out to a BIG sub-division and moved up here to piece and quite.

Day 2 wrote:Ah, the good ole times I could tell you about Cumming....gotta lotta friends there. I used to live over in Fulton County {now Milton}on Hopewell Rd. We sold out to a BIG sub-division and moved up here to piece and quite.

My wife and I are from the Gainesville, Hall county area. Only been in Forsyth about 4 years. We’re lucky enough to have an older house not in a subdivision. Let me know if you interested in any of the original drivetrain parts. I hope to start tearing the truck down in the next month or so.

I'm looking for a clutch equalizer bar. Do you have one that you don't need? Thank you.

What are you thinking on the column? Do you have the shift linkage also?