Page 1 of 1

good source for ignition switch lock cylinder

Posted: July 12, 2019, 4:43 pm
by ratrapp
anybody know of a good source for an ignition switch/lock cylinder and bezel or a 66?i've got 2 from 2 different vendors and they both junk.first cylinder wont hardly turn and the second broke in half the second time I turned it.they don't even function good before you put them in the truck.

Re: good source for ignition switch lock cylinder

Posted: July 13, 2019, 5:20 pm
by oldsmiley
It's a shame but they all come over on the boat now and you're right....they're junk.

Re: good source for ignition switch lock cylinder

Posted: July 13, 2019, 8:44 pm
by longcabjohn
Try older type (mom and pop) parts store. They might have one from back in the day.


Johnny

Re: good source for ignition switch lock cylinder

Posted: July 15, 2019, 1:49 pm
by My wife's nightmare
So I went and looked through my "stock" and have a couple Standard products cylinders and switches I've picked up from different places.

So these are not any good either???

Re: good source for ignition switch lock cylinder

Posted: July 15, 2019, 2:46 pm
by 6166 Junkyard Dog
ours do not come over the boat,, never will that's why we still sell ORIGINAL Ford Motorcraft Parts on these