Page 1 of 1
A pillar hole plug
Posted: May 18, 2020, 2:52 pm
by twinturbo61uni
Is there a replacement plug for the hole behind the dash in the A pillar, kinda behind the ignition switch?
Re: A pillar hole plug
Posted: June 14, 2020, 12:41 pm
by twinturbo61uni
Re: A pillar hole plug
Posted: June 14, 2020, 8:18 pm
by castruck_1964
not exactly sure where you mean by A pillar
Re: A pillar hole plug
Posted: June 14, 2020, 9:24 pm
by grump
Are you talking about the hole at the bottom of the windshield post that you have to stick your head thru the gauge opening to see it. If that's the one you're talking about it has a rolled edge so the answer would be no.
Re: A pillar hole plug
Posted: June 15, 2020, 8:38 am
by MY OL 66
That hole is for the wiring from the dash to either the gas tank level sensor or dome light, both at the back of the cab.
Re: A pillar hole plug
Posted: June 17, 2020, 10:03 am
by twinturbo61uni
grump wrote:Are you talking about the hole at the bottom of the windshield post that you have to stick your head thru the gauge opening to see it. If that's the one you're talking about it has a rolled edge so the answer would be no.
Yes that’s the one and it does have a rolled edge. From the reply below appears to be for wires. Thanks a bunch for this info, it helps greatly!