Slick 60's

Looking for 16 inch 5 on 5 1/2 5 inch wide innie wheels for 1964 F 100. Anybody have any for sale?

No one?

I have had some , but let them slip away

Are you looking for a full set ?

I have come up with one need 3 more

I have four (but can only lay eyes on three at the moment, but the other one is close by I’m sure.) Not particularly wide, 6 1/2”. Would need to be blasted. If those might work for you let me know.

Gritsngumbo wrote:I have four (but can only lay eyes on three at the moment, but the other one is close by I’m sure.) Not particularly wide, 6 1/2”. Would need to be blasted. If those might work for you let me know.

I am looking for 5 inch wide wheels. That would be measuring inside bead to inside bead. Don't know what the outside bead measurement would be or how you measured yours. If they have no tires mounted on them could you measure inside to inside?

Sure. After coffee!

I’ll get a better pic tomorrow when I have someone to either hold the tape or the camera. PM me your email as I’ve forgotten how to post pics on here. I’ve been away for a while.

I think these are. I have 4. They are outies. I think we’re on a 64. I have to measure it to be sure.

I’m in VA.

shipwrecked wrote:



I think these are. I have 4. They are outies. I think we’re on a 64. I have to measure it to be sure.

I’m in VA.

Thanks but looking for 16 inch innies

16 inch 5 lug came on 49 half tons. dont know what other years were available. many years ago I used to scour the junk yards for them.