Page 1 of 1
Rear drive shaft too short
Posted: March 24, 2021, 12:08 pm
by twotone
I have a 66 longbed and me and my son took the bed off and we changed the leaf spring shackles. The new replacements looked just like the old original ones. I took the drive shafts out and put in new universal joints. I had the truck painted and the other day I was putting the drive shafts back in. The forward shaft went in just fine, but the rear part of the shaft is about 3 or 4 inches short. What could have happened. The shackles weren't anything for dropping the frame or anything.
Re: Rear drive shaft too short
Posted: March 24, 2021, 1:14 pm
by longcabjohn
You put the springs in backwards. They are longer on rear that front.
Johnny
Re: Rear drive shaft too short
Posted: April 24, 2021, 7:19 pm
by twotone
That was exactly the problem. Thank you. Sorry for the long reply delay, been sick.
Re: Rear drive shaft too short
Posted: May 16, 2021, 1:52 pm
by BarnieTrk
I´m surprised the brake line going to the rear axle still fit with the rear being moved that far back.
BarnieTrk
Re: Rear drive shaft too short
Posted: May 16, 2021, 5:15 pm
by slick4x4
the brake hose is long enough to handle the rear end
moving vertical up & down quite a ways ...
3" inches horizontal wouldnt hardly be noticeable