Been gone a little while. What I've been up to.
Posted: November 10, 2007, 8:09 pm
Been gone a little while, so I thought I'd pop back in and see what ya'll had been up to. I just finished reading about 6 pages of posts
Me:
I spent probably 3-4 days rewiring my new '77 4x4 I just bought. Among the lovely ideas the previous owner had were:
"dont know why the tach doesnt work, we think its a bare wire rubbing against the dash cus when you hit the brakes it rubs just right and sometimes works"
Actually what had happened was they had wired the hot wire for the tach into the brake lights.
Apparently they had their foot on the brake when they were wiring it and just grabbed the first hot wire they found.
4 seperate hot wires running straight from the battery through fused links all the way to the back of the truck. 1 of which was wired straight into the left tail light. I guess they REALLY wanted that taillight on. Fortunately all of the 4 were ripped apart, cut, or similiary screwed up and nothing worked.
Melted wires and shorts galore in the fuse block.
like BlackAgatha, I think I pulled at least 20' of excess wire out of the truck. Scratch that, more like 80+ because of the FOUR freakin hot wires running to the rear which served no purpose.
They liked to wire things up with speaker wire. yay.
The list goes on. One of my favorites though was their splicing jobs... they literally had over 8 splices in one 6 inch length of harness. however none of them actually went anywhere. Their thoughts seemed to run along the lines of "I think I'll splice into this. No wait I'll splice into my splice. No wait I wont use any of that. No wait I'll splice into that again..."
I believe I've finally tracked down and fixed 95% of the problems in the truck though. With the exception of the backup light switch not working and a few wires running down to the transmission that I didn't feel like taking the transmission hump out to fix. I now at least have all working gauges, (save the ammeter that I didnt care to screw with) a conversion to the newer ford Mini-Starter, working gas gauges and fuel pump all wired into 1 single switch. I just found that I have a battery drain though, so I've got a little work ahead of me still.
On a high note though... I'm finally getting started on building my shop
Words can't describe how excited and relieved I am about this. I've been waiting over a year, (actually more like 10 years if you want to be specific) to get started on this, and its a big "yeehawww" to finally be getting going. I have 2 poles in the ground at the moment, and a pile of 160 2x6s sitting waiting for framing. Trusses are coming in roughly 2 weeks, and I'm hoping to have all the framing done by then and ready for them to set them in place when the trusses get here. I know it shouldnt normally take that long but I'm doing almost all the work by myself and things take about 5 times as long without an extra set of hands. I'm running into one of those rare times in my life when I'm really wishing there were more work hours in a day so I could work longer I'm having so much fun. Darkness coming on is a sad time
Anyway, I'm still alive and kicking, but busy and having fun at the same time.
Me:
I spent probably 3-4 days rewiring my new '77 4x4 I just bought. Among the lovely ideas the previous owner had were:
"dont know why the tach doesnt work, we think its a bare wire rubbing against the dash cus when you hit the brakes it rubs just right and sometimes works"
Actually what had happened was they had wired the hot wire for the tach into the brake lights.
4 seperate hot wires running straight from the battery through fused links all the way to the back of the truck. 1 of which was wired straight into the left tail light. I guess they REALLY wanted that taillight on. Fortunately all of the 4 were ripped apart, cut, or similiary screwed up and nothing worked.
Melted wires and shorts galore in the fuse block.
like BlackAgatha, I think I pulled at least 20' of excess wire out of the truck. Scratch that, more like 80+ because of the FOUR freakin hot wires running to the rear which served no purpose.
They liked to wire things up with speaker wire. yay.
The list goes on. One of my favorites though was their splicing jobs... they literally had over 8 splices in one 6 inch length of harness. however none of them actually went anywhere. Their thoughts seemed to run along the lines of "I think I'll splice into this. No wait I'll splice into my splice. No wait I wont use any of that. No wait I'll splice into that again..."
I believe I've finally tracked down and fixed 95% of the problems in the truck though. With the exception of the backup light switch not working and a few wires running down to the transmission that I didn't feel like taking the transmission hump out to fix. I now at least have all working gauges, (save the ammeter that I didnt care to screw with) a conversion to the newer ford Mini-Starter, working gas gauges and fuel pump all wired into 1 single switch. I just found that I have a battery drain though, so I've got a little work ahead of me still.
On a high note though... I'm finally getting started on building my shop
Words can't describe how excited and relieved I am about this. I've been waiting over a year, (actually more like 10 years if you want to be specific) to get started on this, and its a big "yeehawww" to finally be getting going. I have 2 poles in the ground at the moment, and a pile of 160 2x6s sitting waiting for framing. Trusses are coming in roughly 2 weeks, and I'm hoping to have all the framing done by then and ready for them to set them in place when the trusses get here. I know it shouldnt normally take that long but I'm doing almost all the work by myself and things take about 5 times as long without an extra set of hands. I'm running into one of those rare times in my life when I'm really wishing there were more work hours in a day so I could work longer I'm having so much fun. Darkness coming on is a sad time
Anyway, I'm still alive and kicking, but busy and having fun at the same time.











