Slick 60's

Ok, so I'm in a dilemma...

I need tires for the '66 and I'm unsure of the size that's gonna fit/look best. Right now I'm looking at some Yokohama Geolander HT in a 265/70/15. But I don't know if they'll be too big.

I've been doing some searches and some reading on here, but if anyone has any specific side shots of their truck, could you post it please and tell me what size tires you're running?

Also on what kinda wheels and backspacing.

I'm wanting the Chrome Smoothies, but I can't seem to find it in anything less than a 4" backspace and I don't know if that's gonna be TOO tucked under the rear. I just like for the wheel/tire to fill the fenderwell without looking too dinky.

Is anybody running two different sized tires on different backspaced wheels - front/rear? I don't want to do this because of rotating the tires, BUT if that's what it takes to look "even" I'll have to. I noticed last night while trying on some 15x8s [4" backspace] that the front tires looked fine in the fenderwell, but the rears were kinda skinny and too "tucked under" for my tastes. I don't want to spend a buncha money just to sit back and say "that other size would have looked better, ya know?

Anyhow, pics with sizes would be great. Thanks.

[The one thread I did fine, was pics of HeavyHaulers Uni, but couldn't find what size the tires were.]

265 / 70 R16 Cooper Discoverer A/T

16x8 American Racing Outlaw II

[albumimg]1599[/albumimg]

Do you know the backspacing on those wheels?

I don't know off hand, but I might be able to measure one for you sometime this weekend. I didn't specify back spacing when I ordered them, I just told the guy what truck they were going on.

i have 275/60/15 with 4.5 in backspacing on the rear, 235 60/15 on the front, not sure on backspacing, but looks about the same, is a little bit too much on the front, have a hard time with the width on trailers since the front is wider.. new rims will be narrower for front next time
________
Cultus

G`day effie, Lenore has on the front 17x7 rims with 4" b/s,bridgestone dueler H/P 255-60r 17 rolling height 29",

on the back 17x8 rims 4.5 b/s should`ve been 3.5! bridgestone dueler H/P 275-55r 17 rolling height 29"

Alan,

i have probably the smallest tires anyone has on a slick here. i have 215/75r15 on all four. made sure to get them in a high load/ high psi rating. my 10 year old can turn the wheels on flat ground while the truck is sitting still. it is effortless if moving at all. no clearance issues. the taller the tires are the harder your brakes have to work...

Effie, I just put those same Yokohamas Geo H/T (23570R16's) on my Jeep Liberty. Got them from Discount Tire, if you have one of those. There is an instant $50 rebate, plus they knock off about another $30 as well.

These tires have good reviews on Tirerack.com

dotcentral wrote:Effie, I just put those same Yokohamas Geo H/T (23570R16's) on my Jeep Liberty. Got them from Discount Tire, if you have one of those. There is an instant $50 rebate, plus they knock off about another $30 as well.

These tires have good reviews on Tirerack.com

I have the Yoko Geolander ATs on my Bronco and thats what kinda lead me in the direction of the HTs. [Never run a Yoko before and really like the ATs so far on my Bronco.]

I have a Discount Tire, too...its where I got my ATs and he even haggled the price with me. I told him I priced them somewhere else for a lesser price and he come down to what I was willing to spend. I didn't tell him the price I got the first time was a dealership employee discount.



Well, I went down to Summit today to buy some other goodies and went ahead and bought the Smoothies in 15x8 with a 4" backspace. The wheels on it now look good in the front [as far as wheel placement is concerned] and my brother said if with the new tires they are too tucked [in the rear] it's not problem to add like a 1/4" spacer plate behind the wheel.

Maybe ya'll can answer this...what is the trick to getting that smoothie hubcap off without damaging it? Is there a special tool or something? We stuck the wheels on there and popped the cap on just to check fit and look...then had to figure out how to get the cap back off. Small screwdriver wrapped in a rag worked, but I'm sure there's a better way.



Thanks for all the replies. Ya'll brought up a good point about the steering. I think now I'm leaning towards a 245/70 or 75. I don't have PS and no plans of now to convert...I like the armstrong steering, reminds me I'm driving a real truck.

that's what i use. a small screwdriver wrapped in a rag. be careful. those centers dent really easy.

Effie, my 64 has 255 70 15 on 8" wheels with 3 1/2 " backspace. They fit real nice, those smoothies will look good on a Slick.
Doug

255/60/15

[albumimg]3131[/albumimg][albumimg]3111[/albumimg]

mine are 275/60/15s on 15/10 modulars, cool huh??


[albumimg]2100[/albumimg]

[albumimg]2095[/albumimg]

[albumimg]2256[/albumimg]

Any competent wheel shop should have a tool similar to this one click here
Or you can use this page to do it yourself.

Rosati wrote:Any competent wheel shop should have a tool similar to this one click here

i bought one of those and they suck, it is almost imposible to use that "tire size" wire crap
________
hemp

frank66 wrote:I don't know off hand, but I might be able to measure one for you sometime this weekend. I didn't specify back spacing when I ordered them, I just told the guy what truck they were going on.

Effie wrote:Do you know the backspacing on those wheels?

I have the same rims, and did the same thing as Frank. I have one off right now, I will try to get out tomarrow to measure.

if you go to lesschwab.com you can do a virtual wheels thing with a slick ford truck can not do tires unless you go to a store but they are only located in oregon, washington, idaho, and northern california. but you can look at different wheels.