Page 1 of 1
American muscle car show,last Saturday
Posted: November 26, 2007, 7:52 pm
by 66freezerburn
Did anyone happen to catch the show on saturday night?
they dynoed 5 muscle car engines built to stock specs.
Chev 409 dynoed at 406hp factory rated 409?
Pontiac 421SD dynoed at 488hp factory rated?
Ford 427 Tunnel port dynoed at 637hp factory rated 425?
Cheby 427 L88 dynoed at 560 ish factory rated 425?
Dodge 426 Street Hemi dynoed at 820hp factory rated 425?
I pretty much crapped my pants when the Ford and Dodge dynoed that high.
Posted: November 26, 2007, 9:47 pm
by shawns fords
after reading some articles about dyno testers fudging the numbers by altering the way the system measures the climates, I dont have much faith in them anymore. the last article I read was in either hot rod magazine or Car Craft. they were showing how them dyno tests were fudged by the tuners messing with the BARO meters and other items that confuse the dyno to believe there is more power than actual. so unless a guy actually knew if the system was properly calibrated and tuned to correct altitude and the baro was reading properly. who knows what actual HP really IS? sorry, kinda of a let down here. I guess I just dont get all excited over it anymore. besides its more fun to run them down the track instead

Posted: November 26, 2007, 10:21 pm
by 66freezerburn
I agree its more fun running them but the point of the episode was to set aside all of the variables like driver error,traction, so on and just concentrate on actual engine #'s,which I thought was cool since we all know that #'s were understated from the factory.
I would like to see figures from big and small BOSS engines.SOHC 427 aswell as others.
mabey the results were errored?with numbers like those it makes you wonder.
can anyone confirm these?
Posted: November 26, 2007, 10:48 pm
by 36truck
That topic came up on other forums. Numbers have been rigged on the Mopar bad. I would not trust any of those #.
Posted: November 26, 2007, 11:24 pm
by Jarrod
I call

also. THere is no way that a stock 426 hemi dyno'ed at that number with out some creative fanageling
Posted: November 27, 2007, 11:36 am
by Slick Fan
Jarrod wrote:I call

also. THere is no way that a stock 426 hemi dyno'ed at that number with out some creative fanageling

That does sound a tad high.
I wonder how accurate the tunnel port numbers are?
Posted: November 27, 2007, 7:12 pm
by Jarrod
My dad used has told me that a charger or cuda with a well tuned 440 6 pack could keep up with a comparable car with the Hemi. Is it cuz it just spun the wheels down the track or does a 440 make similar power? I doubt it
Posted: November 27, 2007, 9:54 pm
by FORDMANLCRACKEL
I agree the Dodge 426 is

but the rest look about right. The factory under rated horse power for insurance reasons back then, but that much on the Dodge 426 Hemi.
Lonnie
Posted: November 28, 2007, 11:36 am
by 36truck
Heres a link to when the show first aired in April 2007. Thought you would like to see what the Hemi boys have to say about there own engine.
http://board.moparts.org/ubbthreads/sho ... &vc=1&nt=4
Posted: November 28, 2007, 12:23 pm
by Slick Fan
DTHemi's response pretty much cements it, I'd say;
"In defense of the Hemi, we had a week (at our expense) to put together 3 motors, none of which are easy to get parts for. The hemi is an iron headed motor with steel rods, and a flat tappet cam. FAST motors make 850 and SS motors make over 900 now. Yes that motor has more work in it than it should, but we used what we had at the shop for motors in progress.
Remember television is for entertainment, much like the internet, so don't read too much into it. Also, it's not like it was a secret kept from the production."
It would be nice to see a dyno comparison of STOCK engines.
Jarrod wrote:My dad used has told me that a charger or cuda with a well tuned 440 6 pack could keep up with a comparable car with the Hemi. Is it cuz it just spun the wheels down the track or does a 440 make similar power? I doubt it
That's what I've known to be true, too.
The Hemi is more doggy off the line than a triple carbed 440 mainly because of the size of the intake ports. The Hemi was designed with NASCAR in mind, so it doesn't really come alive until after 3K rpm's or so.
The 440 6-pak is well into it's useable powerband below 3K rpm.
Posted: November 29, 2007, 2:06 am
by MrEvil
66turbomerc wrote:
I would like to see figures from big and small BOSS engines.SOHC 427 aswell as others.
I guarantee you the SOHC 427 would beat the crap out of a Hemi, the 427 is a Hemi itself and has the overhead cams to boot.
My dad used to hang around with a guy when he was in High School who had a '64 Galaxie R Code. He could outrun anything sitting on four wheels in and around Amarillo TX. So yeah, I totally concur that those Hemi numbers were total hogwash. There's bunches of 56A hemis still around though that are ex irrigation motors. The reason being is that they were HORRIBLE irrigation engines. Even a Moline 4 banger was a better well motor than a Hemi.