Page 1 of 1

Building a 300 I-6

Posted: December 20, 2007, 8:55 pm
by Mike P
I would like to build my 300 to kick the crap out of the Chev crew at work.
I was told that I would have to go with a big block just to run with the small block Chev's. I don't agree If you know of any sites that I can access to build my FORD please let me know Mike :twisted:

Posted: December 20, 2007, 9:09 pm
by Alan Mclennan
:welcome: Mike, heres a site that will help,I hope you woop them bow tie wearing clowns arses,
http://fordsix.com/
good luck!


Alan,

Posted: December 20, 2007, 9:11 pm
by ras4434
Go to fordperformance.com and look around there. A new intake manifold with a 4 barrel and dual exhaust would tromp a 350. I was told this is what was used on the dirt track. It was my plan until cancer got the best of my 66.

Posted: December 20, 2007, 9:19 pm
by Greg D
This is what you can do with a stock 302. My 347 combo will make real good power too for not a ton of bucks.

http://www.fordtruk.com/forums/viewtopic.php?t=4423

My 4th post in this thread is what I am building

http://www.fordtruk.com/forums/viewtopi ... highlight=

Posted: December 20, 2007, 9:25 pm
by FORDMANLCRACKEL

Posted: December 20, 2007, 9:31 pm
by Alan Mclennan
Hey! Mike, There seems to be some confusion here,are you talking about a inline six or a 302 v8.It could make a difference .


Alan,

Posted: December 20, 2007, 10:47 pm
by Greg D
I understand he was talking about a 300-6, I was just showing what can be done with a 302. 300-6 is a great engine, has some decent performance potential, you can just get more from a V-8 is my point.

Posted: December 21, 2007, 6:59 pm
by Alan Mclennan
:iagree: Greg!, but I hope He goes with the 300 and boxing.gif gives it to them bowtie bozos :twisted:


Alan,

Posted: December 21, 2007, 9:17 pm
by Mike P
Hey guys I was talking about a 300 six. I like not having what everyone else has. I just don't like Chev's so if I can out run them with a straight 6 all the better for me. If those boys have buy a 50k diesel just to out pull my 300 that would just make my day..
Mike

Posted: December 21, 2007, 11:53 pm
by frank66
You just have to get the engine to breath better.


Where are you located? I have some parts you might be interested in. I'll send you a private message.