Slick 60's

Posted: **January 30, 2008, 7:42 pm**

http://www.forddoctorsdts.com/quizzes/M ... titude.php
Pretty fun test....except the last part, I got 78%. I failed.

Posted: **January 30, 2008, 8:23 pm**

72% for me.....(sigh).....

Posted: **January 30, 2008, 8:37 pm**

That was fun i got an 86

Lonnie

Posted: **January 30, 2008, 8:42 pm**

i failed too.

should have taken my time instead if zipping thru

speed kills
i will try it again when i have time to properly do it.

Posted: **January 30, 2008, 8:45 pm**

Im going to take it over cause i cant remember which one i missed>

Lonnie

Posted: **January 30, 2008, 10:02 pm**

82 I have seen it before though

Posted: **January 30, 2008, 10:19 pm**

430 points, 86%
Congratulations you passed.

Posted: **January 30, 2008, 10:46 pm**

I got a perfect score!

The 3rd time. Dang squiggly electrical crap!!!

And those pulleys. I don't have pulleys in my garage!!!

In my school, a 66 was considered respectable out on the playground, I tell you!!

Posted: **January 30, 2008, 11:13 pm**

72%.....That electrical stuff kicked my ass

Posted: **January 30, 2008, 11:25 pm**

Max wrote: Dang squiggly electrical crap!!!

Amen

Posted: **January 30, 2008, 11:36 pm**

92% but I will be graduating with a degree in mechanical engineering this spring.

I got 17, 41, 47, and 48 wrong.

Posted: **January 30, 2008, 11:53 pm**

92% here too...then again this is what I do all day...design mechanical systems.

Posted: **January 31, 2008, 12:57 am**

76 here ! what can I say

Alan,

Oh I know! his only a plumber and they dont come much dumber

Posted: **January 31, 2008, 3:40 am**

420 84% not bad for an old guy

Tells me I have forgotten a thing or two.

Posted: **January 31, 2008, 8:39 am**

Got a 78 what's spooky though is I took this test a couple of months ago and got a 84.
Geeze at this rate I should be a blithering idiot by next year.

Posted: **January 31, 2008, 12:23 pm**

frank66 wrote: I got 17, 41, 47, and 48 wrong.

Is there a spot in there that tells you which ones you got wrong? I didn't see one, but I'd like to know which ones I did get wrong.

I'm fairly confident I got that last pulley one wrong, I guessed 25 if I remember right. The other pulleys were easy.

Posted: **January 31, 2008, 12:27 pm**

i thought i was doing pretty good, one time when i answered, it said wrong and let me do it over.this led me to believe it was the only 1 i missed, which was not the case.

Posted: **January 31, 2008, 5:17 pm**

[albumimg]3560[/albumimg]

click on the magnifying glass. it will take you back through each question displaying your answer and the correct answer.

Posted: **January 31, 2008, 6:26 pm**

There we go, thanks Frank.

Posted: **January 31, 2008, 7:43 pm**

I got a 92, but why doesn't it show which ones you missed so you can get better?
I thought I got them all right.
In fact I was sure I got them all right.

Maybe I should pull a Max and do it more than once.
Duh.
U@ss

Slick 60's

Are you up for a good mechanical aptitude test?

Are you up for a good mechanical aptitude test?