new engine
Posted: February 8, 2008, 4:57 pm
What type of funky distributor cap is that? Is that an all-in-one MSD?
Page 1 of 1
Posted: February 8, 2008, 5:01 pm
Looks good!
What type of funky distributor cap is that? Is that an all-in-one MSD?
What type of funky distributor cap is that? Is that an all-in-one MSD?
Posted: February 8, 2008, 5:13 pm
what vehicle is that radiator out of?????? been tryn to find a stock bolt in replacement crossflow for the original downflow rad.
Posted: February 8, 2008, 5:14 pm
what vehicle is that radiator out of?????? been tryn to find a stock bolt in replacement crossflow for the original downflow rad.
Posted: February 8, 2008, 6:41 pm
Looks pretty good! 
What did you get the hydroboost from? (sorry if I missed it before)
What did you get the hydroboost from? (sorry if I missed it before)
Posted: February 8, 2008, 7:45 pm
Its the right color motor.Johnny Canuck wrote:Looks good!
What type of funky distributor cap is that? Is that an all-in-one MSD?
Lonnie
Posted: February 8, 2008, 8:09 pm
Hydro booster is probably out of a one ton GM. Nice small package and works really well.
The Dizzy looks like GM copy HEI by MSD or Mallory.
Hey if it works?????
Garbz
The Dizzy looks like GM copy HEI by MSD or Mallory.
Hey if it works?????
Garbz
Posted: February 8, 2008, 9:18 pm
looks great,red cap or not.
blue would be nice but probably they dont make that color.
blue would be nice but probably they dont make that color.
Posted: February 8, 2008, 11:01 pm
Looking Good!
Posted: February 9, 2008, 12:52 am
thanks, i dont like the red cap either, thinking about painting it,, dont know how that will last though,, its a procomp HEI,, 50,000 volts..
i got the hydraboost from a junk yard pulled it off a 2001 mustang, paid 75 for everything including hoses and such,,, all i was interested in was the fittings, cause i went to a hydraulic shop to have the hoses made
aluminum radiator is from universal radiators, i had to weld on the brackets and drill the holes, was not a direct fit piece, but it came out nice
________
Motorcycle Tires
i got the hydraboost from a junk yard pulled it off a 2001 mustang, paid 75 for everything including hoses and such,,, all i was interested in was the fittings, cause i went to a hydraulic shop to have the hoses made
aluminum radiator is from universal radiators, i had to weld on the brackets and drill the holes, was not a direct fit piece, but it came out nice
________
Motorcycle Tires
Posted: February 9, 2008, 3:46 am
Ford racing's Dizzy cap with the locking tabs is red too, I wasn't complaining about the colour. Just wanted to know what brand is all. Thanks!
Posted: February 9, 2008, 8:01 am
That looks real good, great idea on the master cylinder set up and GREAT THE DIST. IS IN THE FRONT No rera dist. here 
unless its a Y-Block for a truck
No rera dist. here unless its a Y-Block for a truckPosted: February 11, 2008, 1:15 pm
Looks nice - everything neat & clean, all the plumbing & wiring routed.
The only thought I had is that in Pasadena a shroud might help out cooling with that nice radiator later on this summer.
Doug
The only thought I had is that in Pasadena a shroud might help out cooling with that nice radiator later on this summer.
Doug
Posted: February 11, 2008, 1:38 pm
What mounts and headers are you using?
(the million questions here mean you did it right )
(the million questions here mean you did it right
)Posted: February 11, 2008, 1:40 pm
I have a 70Tbird 429 shroud, want it?
I paid $50 on Ebay.
Ill sell it for $10 (USPS frustration fee
) + Shipping
If you are interested Ill put up a pic and dimensions
I paid $50 on Ebay.
Ill sell it for $10 (USPS frustration fee
) + Shipping If you are interested Ill put up a pic and dimensions
Posted: February 19, 2008, 1:51 pm
ive got the old shroud that was on my original radiator, i had bought an 18 electric fan with shroud, but it was too wide, did not clear my water pump, this is only temp until i buy another electric fan, headers are FPA
________
hot box vape
________
hot box vape