Page 1 of 1

Dozer Daze

Posted: February 27, 2008, 12:45 am
by Ford4jack
Found some pics that were took back when I worked at the Deere dealership they are photos of photos I put them in my gallery. Anyway there of a dozer done thru Deere's relife program for the TN dept of forestry.

Basically take an old machine and make a new one out of it. When completed they get a new serial number and a new warranty.

This was a really fun time for me at the start. Just being left alone to tear down inspect and reassemble a machine with the new parts Deere required and my call on the rest of the parts. Luckily we farmed out the sand blasting of the large parts so I only had to blast what would fit in the box blaster.

It was a good mix of wrenching fabricating and painting did 6 dozers complete with fire plows and brush guards and I was able to crank them out on an average of every 9 weeks. Of course the service manager was howling about how they needed to be done every 8 weeks.

That's where the trouble started between me and the service manager. # 6 was a loader dozer and it took 10 weeks to finish. When the head of the forestry dept was there I apologized to him for taking so long on that one.
His reply was what do you mean your allowed 12 weeks on these machines. Yep me and the manager had some words on that. There was some other stuff he and the shop Forman were up to that really rubbed me the wrong way and about 6 months later I decided to go out on my own turning wrenches.

That was a spooky feeling giving up the security of a weekly paycheck but it worked out very well I was able to make it just working out of the back of my truck for about a year then hooked up with a good buddy and rented some shop space from him. He was a salesman that had gone out on his own dealing in used equipment so I had customers machines and his stuff to wrench on.

about 3 months after I left the dealer I got word that the service manager and the foremen were fired for warranty fraud. HA

Well my buddy got behind with the bank and had to go bankrupt so I ended up doing backhoe work kind of fun riding them instead of wrenching on them all the time.

Well now y'all know my life's story for the last 12 years kind of a long post but this has been on my mind after finding those pics. I guess the morrow of the story is you never know how things will work out until you try.

Posted: February 27, 2008, 10:14 am
by 36truck
Nice looking dozer. What year looks like early to mid 70's. I've torn down a few pieces of equipment to rebuild them but haven't gone that far.

Posted: February 27, 2008, 11:23 am
by Slick Fan
Man, those things sure do come apart in a lot smaller pieces than a truck does. Looks like brand new when you were done, though. :cheers:

Posted: February 27, 2008, 2:58 pm
by ICEMAN6166
very nice job.
like your cab removal method too.

Posted: February 27, 2008, 4:51 pm
by Ford4jack
Slick fan these things will fill 2 bays when you scatter them. If a customer tore up the main transmission / pinion gear shaft on an old 350/450 dozer you basically had to take them that far to get the shaft out. People would come in and see there machine like that and know they were in for a hefty labor bill.

Deere went with a new design on the G series dozers and it was a major improvement. A lot of there smaller sized old industrial equipment designs came from the AG side of the company and were labor intensive to repair.

Tom I'm not sure on the year models I would say the C series were early to mid 80's. We went by the serial numbers that's what mattered from the mechanics end. Glad the relife machines were all C models for the most part. If I remember correctly the loader dozer was a B model though.

The 350 C models have wet steering clutches and were a lot nicer to work on then the earlier ones with those nasty old dry clutches.

A word of caution to anyone here thinking about getting an old Deere dozer. Beware of the old 550/550 B models. They have a British twin disc transmission in them that will break the bank to rebuild.


Iceman
That method works well for me but on the cab that mattered I pulled a stupid human trick.
Had the cab upended and was trying to put it in the carport but it kept trying to spin around I hooked a strap to one side of the cab and put the other end on the boom control so I could grab it and control the sway.

Got in the carport and needed to lower the cab a bit so I was going to stretch out the dipper end and lower the boom some. Of course when I stretched out the dipper it pulled the boom lever and the cab came down hard in the gravel. It put several dents in the top rolled rear edge of the cab. :roll:

Posted: February 27, 2008, 6:13 pm
by 36truck
I know of 2 550 owners that got robbed by that stuff. Toke forever to get parts & $$$$$$