Page 1 of 1

Frugalness

Posted: April 10, 2008, 8:35 am
by Johnny Canuck
Or is that Frugality?
A long time ago, the Salesman from Roddoors told me over the phone.. "All you Ford truck owners are FRUGAL!!"

So I was reading thru here and seen some guy hates doing kingpins, when it takes 15 minutes to take your axle off, and run it over to a machine shop to be done.
Last Night I was struggling to take the bottom rad hose off my rig, recycled from the '78 that the engine core came out of. "Don't be so Frugal", I was telling myself," This thing has to go 1800 miles in August and you don't need to lose that hose in East Overshoe, Wyoming."

What's your frugal story? The Roddoors man was obviously right... 8)

Posted: April 10, 2008, 9:28 am
by Hoofbeat Racer
Wish I could think of a good story John cept I completely blew the budget on my Ranger :oops: I have sold my 90 Bronco and my wife's 02 Impala to help fund this addiction to my Slick. I am considering Ebaying a kidney to get her on the road soon before large men from the bank start taking our possessions :shock:

Frugal, not really, I like to think I am cheap but I am really a Steak sandwich eater on a peanut butter budget

Posted: April 10, 2008, 9:47 am
by jwh f-100
Please define the difference between a frugal person and a pack rat as I am not sure what category I fall into. LOL

At work we are fixing a vehicle with the batteries mounted to the frame that was hit in the side. The eight foot harness including heavy negative and positive cables and cable ends was replaced. The old one went into the garbage but guess where it is now... In a box in my garage.

Posted: April 10, 2008, 10:01 am
by Johnny Canuck
I dunno the difference myself as I have boxes and boxes of parts for Windsor engines, and whenever I throw anything out, within a week I need that part. 'Course it helps when all you seem to buy is vehicles with Windsor engines.. but still...

BTW that rad hose is still pretty good. Gonna get a new one for the Merc, but the old hose is not leaving home...

Mark, You are right, doing up a Ford truck is expensive at best, probably forcing those of us without quite as well-paying jobs to reuse and recycle. I could have done a Chev with all-new parts for cheaper, I am dang near sure. Then, I would have a belly button Chev just like everybody else, tho.
67-72 Chevs are common as houseflies around here. As I was typing this, 2 drove by my window.

Nah. Rather be a frugal Ford man. With a steel floor in my box.

Posted: April 10, 2008, 10:05 am
by Casey 65
I once heard, "Watch where a man puts his money, that is his passion". I don't know if that is true, but I know if you save nuts and bolts off someting that doesn't work anymore you can usually save a trip to the hardware store when you need a particular nut or bolt. If you throw something away, you will need it in a week and cuss yourself for throwing it away. I don't know how many parts for a slick you really need.... I'm not there yet. I like working on my slick, but have found out that you can take too big a bite out of the elephant. If I won the lottery, I would have the guy that paints for Chip Foose paint my Slick. Frugal is in the eye of the beholder. what is "cheap" for one is "frugal" to another. If you can...do. If you can't... you're about average... Always look for the funny things in the things that come your way. If you can laugh at a problem, it can't own you... I also know that I'll see you in August at Slick Stock III...

Posted: April 10, 2008, 10:13 am
by FORDBOYpete
JC,
I was taught frugal is being wise enough to not waste time, effort and money by actually being cheap.
Being cheap is how we waste time effort & money. It is also how we tend to get in trouble .
We all know, or ought to know by now, just how expensive trouble can be. shrug.gif

In my way of seeing it: Being frugal is what puts true value & worth in our lives, or into mine anyhow. . . . . :thumright:

"We gotta remember we always get what we pay for, Right?" That goes for a hosin' too we get taken
when we ignore the "being wise" part of the above remark.

I think Les Ismore said that. . . . :roll:

FBP Bolt.gif

Posted: April 10, 2008, 10:28 am
by willy3486
I am nicknamed Fred Sanford for my scavaging. Anyway with mine I used wood for door pulls,dash,door pocket rings because I had it. I went to the savage yard and got the ends of wiring rolls from factories that scrapped them. Good wire. I used a lot of scrap metal to make the parts. The one part I wish I could change is the Ned Beaty floors. I used metal for my floorboards from doors that were used in a swine barn between the pens. Now when you hit the gas pedal to the floor they "squeal like a pig" . So thats why they are called Ned Beaty floors.

Posted: April 10, 2008, 10:36 am
by Johnny Canuck
Image

Heheheheheh Willy

Posted: April 10, 2008, 11:12 am
by Ford4jack
Dang that's perdy someone better take his pliers away though. :lol:

Posted: April 10, 2008, 11:54 am
by Slick Fan
Let me start out by saying that 50% of the time, if I remove a radiator/heater hose that has been on there a long time, it's not going back on. Because sure as snot, you try to reuse it & it's gonna leak.
If the hose is still semi-soft, I'll slice off the chunk below the clamp, so when I re-clamp it, it clamps on fresh meat again.
Speaking of which, have you seen the price of antifreeze lately??? :shock: :evil:

Other than that though, for the most part I reuse TONS of stuff! Hell, I even swipe good bulbs & miscelaneous fasteners & clips from cars in the boneyard as I walk by...just because you never know when crap like will come in handy. :lol:

Posted: April 10, 2008, 12:37 pm
by Johnny Canuck
LOL grant you are dating yourself by using the word "swipe" with that meaning

Bet you , like me, still go to the "record store" to buy music.

The hose BTW is still good, no soft spots. New one cost me 26 bucks this AM. Ouch.

Posted: April 10, 2008, 1:29 pm
by ICEMAN6166
recycling of parts is a good idea.especially if you are "economically challenged" .
not much i wont save and reuse if possible.
must have installed at least 20 used clutch discs before.
any u-joint thats still tight i save, got enough to last many years.
belts and hoses might get reused depending.dont like reusing brake lines and brake hoses though.shoes with more than 50% of the lining left i will.

bought a bump body to put on a 4x4 frame several years ago.there was an FE in the bed.not seized so i decided to use it, condition unknown.ran out of oil on its first trip and seized up after 20 miles. wont use an engine now unless i hear it run or drive it first.

Posted: April 10, 2008, 2:22 pm
by Slick Fan
Johnny Canuck wrote:LOL grant you are dating yourself by using the word "swipe" with that meaning

Bet you , like me, still go to the "record store" to buy music.
Guilty. :? :lol:

Posted: April 10, 2008, 9:52 pm
by Max
I don't think the word frugal applies like most folk outside of this type of hobby would understand it to mean. You have to be frugal in many ways to put these trucks back together.

But I get yer drift. I just like to call it being skillful instead.

Posted: April 11, 2008, 3:16 am
by Z-MAN
I am defintely a pack rat, but it seems like I never need it til I throw it away.

Z

Ok & a lil frugal too.