Page 1 of 2
New to Slick 60's...
Posted: April 17, 2008, 8:22 pm
by clevor347
I'm new to this forum. I've been reading around on here for awhile now.. I finally got time to join. I'm from the Jackson, Mississippi. I'm a sophomore in high school. I have a swb 1966 f100 with a 5.0 h.o. out of a 1985 mustang gt. I'm restoring the truck from the frame up, my dad's worked on Ford trucks from this time era for about 30 years. I got the spindles and steering column out of a 1976 f100, so i will have power steering and power disc brakes on the front when it's all together again.. The power steering unit is Saginaw, I still lack a column. I plan on lowering the truck with DJM dream beams and hangers.. I'd like to set it up for street racing.. Just out of curiosity, how much power can a 85 5.0 block handle? I'd like somewhere around 475.. I've seen a few 347's making this at rwhp.. I also have a 1971 351w block and a set of 1975 351M heads, which I have been told are virtually identical too 2v cleveland heads? The local machinist said that he has built a 408 stroker clevor that ran the quarter in 10 seconds on a carb, so I guess that's an option.. I plan on taking my time with my motor build up, so I was curious if I should get a dart block? I'd like to run a supercharger with a fair amount of boost.. But I don't really know.. So enough talking. Here's my slick.

I have a long way to go, but I have everything I need for the body besides about 150 bucks in patch panels and a fleet side bed.. I have a step side bed in good shape though...

Hopefully the junkyard will be kind this summer.
-Clevor
Posted: April 17, 2008, 8:44 pm
by FORDMANLCRACKEL

to the group. I plan on a 351 clevor one day myself. the 2v 351c, 351m and 400m are pretty much the same heads. Edelbrock now makes an intake for the 302 and the 351 clevor. As far as street racing leave it alone, thats what drag strips are made for and its much safer.
Lonnie
Posted: April 17, 2008, 8:56 pm
by clevor347
I'm not really setting it up for street racing.. I plan on taking it to the strip.. But I intend on driving it daily.. So I wanna keep it a smallblock.
Posted: April 17, 2008, 9:17 pm
by blackagatha
hells yes, more young blood in the slick world. cool. I'm currently a SR in college, well, by credits. Gonna get out of here in a year.
I dont know what power the 5.0s will handle, But I do know that the 85 mustangs can spin a 9 sec. (or is it less?) 1/4 on basically stock engine, with only power adders, no additional strengthening that Im aware of.
street racing is bad, but having too much fun on the street is ok. just watch out for MR HAMMY.
Posted: April 17, 2008, 9:34 pm
by clevor347
yeah. i'm looking at going to college next year for automotive machinery... what kind of power additives are you talking about? i think i need to have a look on google. thanks.
Posted: April 17, 2008, 10:19 pm
by f100matt
Posted: April 17, 2008, 10:28 pm
by blackagatha
mmm, i dunno. like turbos or blowers and stuff. I dont know nothin really other than the fact that they can make/put up with ridiculous power, with like 1/4-20 rod bolts... granted they are replacing those with ARP probably...
I mostly just remember a brief conversation I had with my dad a long time ago. They're super little engines, despite the fact that they came from the 80's... they're like the only good thing to come from the era.
Posted: April 18, 2008, 1:05 am
by Jarrod
the stock 5.0 short block can handle about 450 hp. ANy more than that and well its a toss up. Yes people will slap a turbo or a blower on it as well as other stuff and get like 500-600 hp out of it or more. It will survive a few drag strip passes. However it won't last very long if you flog it on a regular basis. THose engines weren't meant to be squeezed like that. And yes there are those guys in the Mustang Mags that have all nice and shiny turbos and blowers and even nice pretty N2O bottles all on stock short blocks. THey won't last any real lenght of time. I would do it until it breaks and then build a new motor around the Ford Racing Sportsmand block or a Dart Block. Just say nooo to street racing.
Posted: April 18, 2008, 7:22 am
by clevor347
See, that's what I figured. I've got it torn down to the short block, and looking at it and comparing it too earlier model blocks it looks like the metal's alot thinner, thus blowing easier. Guess I'll just start saving up for a Dart block. I wish they weren't as expensive, but I guess you get what you pay for.
-clevor
Posted: April 18, 2008, 8:22 am
by Gritsngumbo
Welcome from Louisiana. I'm just down the road in Monroe. You'll find this to be a great site with lots of information (some correct and some not so much...you just have to short it out yourself) LOL.
Posted: April 18, 2008, 8:36 am
by Johnny Canuck
Save up for a Boss 302 block from Ford Racing. Best small block out there for the price, and still fairly reasonable. Has 4 bolt mains and extra webbing to really put up with what you want to throw at it.
oh and one thing, in regards to your Avatar... this is a
Fleetside:

Comes from the factory with heated tailgate and rotted-out wood bed floor
this is a
Styleside:

Comes from the factory with a nice steel floor and a sensible but Frugal owner
and

to the club!!
Heavy Hauler is giving camera lessons

Posted: April 18, 2008, 10:37 am
by The Big M
Welcome!
If you're looking to make big power, you may want to start with the 351. The taller deck makes for a much stronger block, and the additional stroke is nice in a truck application. I think 5.0's can be made to run reliably at around 400-500 hp, but it's hard to say exactly how much they can handle. There are too many variables (block thickness, overall condition, tune, etc.) For instance, throwing forced induction or nitrous at them without a proper tune is a recipe for disaster, as they are prone to splitting down the middle of the lifter valley all the way to the crank centreline (around the 500-600 hp mark, typically).
You can make a nice 400-hp 5.0 on a budget, but I'd second the recommendation of a Dart or Boss 302 block if you want to add a lot of boost. However, if you do decide to use the 5.0 or 351, get them sonic checked first.
As for the 351M heads, I think you may be better off using a nice set of aftermarket Windsor heads, rather than go through the work of building a Clevor. I believe the 351M heads had larger chambers than the 351C 2V, and hence lower compression. That may be what you want if you're adding boost, but if I were to build a Clevor, I'd use the Aussie heads (smaller cc volume, better low-end torque).
My main recommendation would be to nail down an rpm range that you intend to be operating in, and go from there. That should help narrow down the options.
Re: New to Slick 60's...
Posted: April 18, 2008, 10:50 am
by Slick Fan
clevor347 wrote:Just out of curiosity, how much power can a 85 5.0 block handle?
Not this much, obviously.
(just say no to NAAAWSSS)
Oh & welcome aboard!

Posted: April 18, 2008, 10:59 am
by Johnny Canuck
Posted: April 18, 2008, 2:00 pm
by ethan_lanning
well i would suggest using a 351w block and turning it into a 408.this is what im building right now and im planning on making a little over 500hp.
and you can get aluminum heads and other parts for these blocks pretty cheap off of ebay.
Posted: April 18, 2008, 6:40 pm
by clevor347
where can i get 4 bolt main caps for a 351w?
Posted: April 19, 2008, 4:26 pm
by ICEMAN6166
Posted: April 20, 2008, 12:09 am
by 64 litl un
Why not skip the Fairlane-Windsor V8 family and go with an FE like a 390 or even a 352.
Posted: April 20, 2008, 10:01 am
by Greg D
If you go for a 351 windsor, get one of the later blocks they are roller cam ready. This will save you about $300 in roller cam conversion parts.
Posted: April 20, 2008, 11:35 am
by shawns fords
Welcome aboard. I would go for bigger cubes if you want that kind of power. 400+ out of a 302 is alot of power for a street/strip ride. If you want to stick with the 302. shoot for 300-350 HP and enjoy it and you wont have to worry about breaking stuff