Page 1 of 1

Sunday Activities

Posted: April 20, 2008, 9:56 pm
by dwbr
Look how i spent my Sunday, pulled the motor swapped out torque converters, removed the too huge moroso oil pan, put a ford racing rear sump pan in, got the motor back in and 50% hooked up.. in an earlier thread i commented on the problems i was having with the torque converter, hope this was the fix, i put the old one back in that i know worked, wont have the 2400 stall, but i can live with that
Image
________
vapormatic vaporizer

Posted: April 20, 2008, 11:01 pm
by ezernut9mm
looks like you had fun! lol. man i need a garage.

Posted: April 21, 2008, 12:35 am
by clevor347
Pretty motor.. I hope mine looks that good... That oil pan doesn't fit well? I thought about putting a kicked out rear sump into the truck.. I've always like the way they look. What issues did you have with it in the truck? Nice truck btw.

-clevor

Posted: April 21, 2008, 12:44 am
by 61 Merc
I took a picture this morning too, but not quite the same.

http://photos.globetrotter.net/albums/p ... am=2066275

You can see the motor sitting on the concrete behind the GM that is to go into the 63, but not quite the same.

Posted: April 21, 2008, 1:47 am
by Alan Mclennan
Heard it was cold Dean but wow :shock:


Alan,

Posted: April 21, 2008, 8:57 am
by Johnny Canuck
Yep, Dean. looks like my driveway, minus the Chev.

Posted: April 21, 2008, 9:23 am
by dwbr
clevor347 wrote:Pretty motor.. I hope mine looks that good... That oil pan doesn't fit well? I thought about putting a kicked out rear sump into the truck.. I've always like the way they look. What issues did you have with it in the truck? Nice truck btw.

-clevor
it was just tooo big, i have an auto C-6 it covered the inspection cover, originally i had to bolt the flywheel on through the starter opening, it was too deep and was hitting on the cross member , i bought it for the extra capacity, but was just too much, the ford racing one fit great and it came with a one piece gasket too.
________
og kush seeds

Posted: April 22, 2008, 5:37 pm
by blackagatha
nice. having a garage is great... I just wish ours had an apron on it like yours.that's pretty slick. ours just lets out into the dirt.


do you have any trouble with the engine hoist trying to flip over? We had a crappy old hoist that I think was actually an industrial battery crane for forklifts or something. It was WAY too wide, and short boom. Just barely worked to do the job on Aggie. My cousin brought over a boom extender (it was actually his dad's) for it to put the engine in his Javelin... It totally wanted to fall forward. He had a friend hanging on the hoist to counter balance it, had to lean really hard...


OH yeah, and he was using one of those stupid carb-plate lifting brackets... damn those look like a bad idea.... An 800 pound engine hanging by 4 un-graded 1/4-20 studs, screwed into a cast aluminum intake manifold.... man...

Posted: April 23, 2008, 4:15 pm
by dwbr
with the boom extended out any more it wants to teter over, thats why i have the old heads <not seen in that picture> to add more weight on the back

i was a little nervous about lifting the engine from the intake as well, but after reading numerous article on it and tensil strength etc,, i was a little more comfortable, i didn't waste any time leaving it on the lift as soon as it came out it was bolted to the engine stand, i left it hooked up cause i was working on the oil pan and wanted a little extra security

in all actuality the engine being lifted from the intake worked out rather well
and didn't cost me anything, i had the welder at work make the plate, the only issue i had was the engine tilt going back in, i put a ratchet strap across the front and adjusted it as needed
________
uhwh

Posted: April 24, 2008, 12:50 am
by blackagatha
I dunno. I will never be convinced. It terrifies me every time I see somebody use one. Granted I have never seen one fail, but I find something innately wrong with the idea. I will never lift an engine by anything other than a log chain and 3/8 GRADE 8 bolts into the heads...

yeah, it makes for leveling issues, etc. Not quite as easy, but it works, and I KNOW it aint dropping an engine on my vehicle....

Posted: April 24, 2008, 9:49 am
by 36truck
Just pulled a 351W & 4spd out with the lift plate worked great. There is more than enough strength there to pull an engine with.

Posted: April 24, 2008, 1:35 pm
by ICEMAN6166
pulled lots of engine/trans combos with this beam
3 2x8s nailed and glued together with angled bracing, have a steel channel to keep the chain from digging into the wood.
need concrete for cherry picker to roll on, tried plywood once but the wheels dug in.

[albumimg]566[/albumimg]

Posted: April 24, 2008, 6:26 pm
by Fanatic
BA.........don't I remember a pic of yours with a truck on 2 bumper jacks and nylon straps tied on to keep it from falling over?