Page 1 of 1

8hp Tecumseh info needed

Posted: April 25, 2008, 4:39 pm
by ABA
Sure is nice to have a nieghbor who works for the county recycler.
He brought me home a Yerf-Dog gocart frame and threw in a 8hp Tecumseh Snow Blower engine to power it. ( I have no idea how a snow blower made it this far south. :shock: )

I got the engine mounted and while tinkering with it I noticed it has no breather element nor even a place for one. I guess snow has no dust in it so a breather is not needed up north. :?
Well we got oddles of dust down here so I got to have a breather.

I done the google thing and I can't find squat on this engine other than a random picture. I'm guessing it may have some age on it but it runs good.
Any info you can add will be appreciated. :D
Image
Image
Image

Still got to fab up a tank support and get the right front wheels and belt torque drive and I'll be kicking up some dust. 8)
Image

Posted: April 25, 2008, 6:15 pm
by blackagatha
that showed up at the recycling dump??? haha and your neighbor brought it home for ya? SWEET!

Do you know where the intake is on the snow blower motor? I'm sure you could rig something up if you could get at it... never would have thought about not needing a filter in the snow... haha

Posted: April 25, 2008, 7:39 pm
by ICEMAN6166
snow is frozen water.
air cleaner is still needed to keep that out.
that being said i have a 8hp tecumseh snowblower, has no air cleaner either, been looking for a year with no luck.i suppose i could buy a new one from the dealer but they are not cheap.

Posted: April 25, 2008, 8:53 pm
by ABA
What got me is it looks like it never even came with a breather element. All that primer does is block the intake on the carb. When I removed the cover and saw that I was like What the... Hello, where' s the damn air filter?

I'm sure I could rig something up out of a K&N crankcase filter. I friend of mine uses a K&N on his son's Jr. Dragster. Just one of those little filter's that goes on the valve cover.


Yeah BA my nieghbor brings home riding lawnmowers, push mowers, leaf blowers, weedeaters, electric scooters...etc. Most of those mowers just need a new fuel filter or something as simple as a new rear axle seal. He'll fix'em and make a few dollars off of them.

All I got to do is say I wouldn't mind having a gocart to tinker with and walla, he brings it home.
this is the 4th one I think. All the others were to small for my 6'2" frame but this one fits.
A new one cost about a grand and only came with a 6.5hp engine so that 8hp ought to move it on down the road. :lol:

Posted: April 25, 2008, 9:45 pm
by Greg D
You are changing the front wheels? You don't like the Redneck Pro Street go-kart look? :lol:

Posted: April 25, 2008, 10:00 pm
by ABA
Greg D wrote:You are changing the front wheels? You don't like the Redneck Pro Street go-kart look? :lol:
That's funny right there, I don't care who you are. Git-ER- Done :lol: :lol:

Just put those on it so we move it. But then again it may not matter. The front wheels may not be on the ground much. :shock: 8)

Posted: April 26, 2008, 7:57 am
by jwh f-100
My snowblower also does not have a air clener, never did. But it does have a cover over it to keep the snow out.
I aqiured a few go carts and my son just turned five. I gues I better get one going. :)

Posted: April 26, 2008, 12:04 pm
by blackagatha
i'm jealous. I never had a Gocart... my mom's friend's jackass kid won one from a planters peanut promotion and she was all freaked out and never let him play with it and made him sell it... what a nit. But he deserved to have it stolen, not sold... he was always a little prick!

Posted: April 30, 2008, 2:50 pm
by ICEMAN6166
jwh f-100 wrote:My snowblower also does not have a air clener, never did. But it does have a cover over it to keep the snow out.
I aqiured a few go carts and my son just turned five. I gues I better get one going. :)
i picked up a junk snowblower with 8hp tecumseh yesterday, has the tin covering for the carb and the electric starter i need ( i HATE pullstarts, a pain when its cold).
i asked the guy about the air cleaner and he said there is none on any of them,just the tin cover.

Posted: May 1, 2008, 9:23 am
by DocDave
One of those short tomato soup cans with a hole punched in the bottom and drill for the carb mount. Put one of those pot scrubbers (oil it first)in it and away you go.
I used to be able to get 50 MPH out of my old KMB factory frame and a 3/4 horse Power Products 2 stoke.
My old man was pissed when he couldnt beat me in a McCullogh frame with a 10 horse West Bend (But he weighed about a hundred pounds more than me back then, I've since caught up)
Dave

Posted: May 2, 2008, 7:58 am
by uglyblue66
Ye need to take that tin cover off so we can see the carb,There should be 2 screw holes in the carb that a standard air filter can bolt to.
Hand truck wheels on the front! Cool! :D

Posted: May 4, 2008, 3:19 pm
by ABA
uglyblue66 wrote:Ye need to take that tin cover off so we can see the carb,There should be 2 screw holes in the carb that a standard air filter can bolt to.
Hand truck wheels on the front! Cool! :D
Covers have been removed. Don't need any extra wieght slowing me down. :lol:
Just noticed on the main cover that it says to install an air cleaner if cover is removed. :shock: Dust and dirt can't get past that cover, right? :roll:
Image

Got some new rubber for the front. Now I got to locate some rims.
Image

Just fabbed up a bracket for the throttle cable. I'll make something a bit stronger later on.
Image

Total cost so far.....$0.00 :D

Posted: May 4, 2008, 5:34 pm
by ezernut9mm
aren't those carbs relitively common? i have seen lots of them on lawnmowers over the years. i would think you could find a breather element at a small engine shop.

Posted: May 4, 2008, 8:28 pm
by ABA
You would think so but I haven't hit the small engine shops yet.
Only thing the auto parts stores have is the element itself.
I got a couple spare carbs but one has the up pointing throat and the other one is like this one but it's smaller.