Page 1 of 1

68 Fairlane update

Posted: April 26, 2008, 5:16 pm
by Phil
Getting this thing dropped off.
The guy doing the color had to work unexpectedly today so this gets to sit outside tonight with Metal Ready on it.
Oh well, I won't be sanding the rust off.

Makin' room for the Alfa and the F100's tranny swap.

Man, I'm getting sick of cars.

Image

Image

Image

Posted: April 26, 2008, 5:50 pm
by Johnny Canuck
should be ready to go in what... a week or so evil_lol.gif

Posted: April 26, 2008, 6:02 pm
by Greg D
That is looking good, can't wait to see it painted.
I looked at a 68 or 69 Torino GT fastback today. Amazingly clean car for around here! There was about a 2"x 2" spot up by one torque box that needed fixed, frame rails & torque boxes solid & clean. Needs a couple of real easy outside sheet metal patches. Black interior car with buckets & a console auto, pretty nice interior, red (?) car, no hood scoop. The guy wasn't there so I don't know much more yet. I will be up there Monday so I will stop in and talk to him, it's been sitting out in front his shop along the highway for a LONG time.

Re: 68 Fairlane update

Posted: April 26, 2008, 8:58 pm
by Slick Fan
Heavyhauler wrote:
Man, I'm getting sick of cars.
I bet you won't say that when that thing's in paint. :P

I know of a guy in Texas with the twin to that truck. :thumright:

Posted: April 27, 2008, 4:18 pm
by Gritsngumbo
Greg: Stay focused! You need to get started on upgrading your Uni...cause I need the parts you'll have left over LOL!

Posted: April 27, 2008, 6:06 pm
by Greg D
My Uni is the main project this year. Only reason it's as big of a job as it is going to be is because of all the detail work I am doing while it's apart. Still basically an engine & tranny swap.

Posted: April 27, 2008, 6:44 pm
by Gritsngumbo
Like I have room to talk about staying focused. I can't stay focused to save my life. I'm trying to get Lil Red finished up, but keep jumping to the Uni and trying to decide which direction to go with it.

Posted: April 27, 2008, 8:39 pm
by jwh f-100
Greg D wrote:Only reason it's as big of a job as it is going to be is because of all the detail work I am doing while it's apart. Still basically an engine & tranny swap.
Yeah I know what you are saying. I wanted to just replace the disaster of a motor mount the PO built with a tube x-member. Proir to pulling the engine the truck wouldn't start so it got a pertronix kit. Then it was not charging so it got a delco alternator. Pulled the engine and then decided to get the engine compartment painted. While things were out painted the engine, transmission, frame and undercoated cab. I'm not going to hook up new brake lines to bad brakes so it will get a dual mc and disc brakes. No sense in remounting a old radiator I can't trust, same with the starter. I thought as long as the driveshaft is out and I'm doing the rear brakes might as well get some taller gears for the rear. I don't feel to confident about the wiring so a complete new harness from bumper to bumper it will get. All of this just to fix a motor mount but i will not regret a thing.

Posted: April 28, 2008, 2:08 am
by blackagatha
these old trucks are attention whores. especially when you're just getting to know them. After a while they calm down a bit. Aggie is to the point that she knows she is loved and doesnt demand much attention... I could all but ignore her right now and things would be okay...

Every time you get into a project in the first few years it turns into 10x what you anticipated. But it's all crap that ought to happen anyway.