Page 1 of 1
A Slammed 66 and a Jimmy-pics
Posted: June 1, 2008, 12:35 am
by Phil
Posted: June 1, 2008, 8:28 am
by 66 POJ
Thats pretty fockin low!
Posted: June 1, 2008, 7:15 pm
by Alan Mclennan
Love the pic`s Heavy!, did you take them, the head light affect works well ! keep it up!...............loose the spaghetti sportster too
Alan,
I just looked at those photos again, the affect you got on the side of the slick with the red setting sun (or were they burning the GMC

) is fantastic, Lyn wants to take some pics of lenore I hope they turn out as well!.
Posted: June 1, 2008, 11:44 pm
by blackagatha
those are some pretty cool pics...
I must say, the cool thing about them old C#@^Ys is that you can slam em all the way to the ground and not even have to cut the frame (when I helped my cuz put the 4 link in his '39, we let it off the jacks with no springs installed... holy cripe it was low! It was sittin on the axle, with nothing getting destroyed, and yet only maybe 2 inches from the ground! When he gets the cash for some airbags, it's gonna be a dead simple swap!!!
Posted: June 2, 2008, 1:16 am
by Hoofbeat Racer
I am not a big fan of lowering anything but those are pretty sweet. Great shots too by the way HH.
Posted: June 2, 2008, 3:39 pm
by Slick Fan
Man, you could step into the bed from any side & not even slow your stride!
And what is that hanging off the GMC's hitch?
Posted: June 2, 2008, 4:41 pm
by Alan Mclennan
Slick Fan wrote:Man, you could step into the bed from any side & not even slow your stride!
And what is that hanging off the GMC's hitch?

Truck nuts!
Alan,
Posted: June 2, 2008, 5:42 pm
by Slick Fan
Alan Mclennan wrote:Slick Fan wrote:Man, you could step into the bed from any side & not even slow your stride!
And what is that hanging off the GMC's hitch?

Truck nuts!
That's what I thought at first, but it looks like a big steel hoop. I bet whenever that guy drops it to the ground, he knows it's home by listening to the hoop go *CLANK*!

Posted: June 2, 2008, 5:42 pm
by Johnny Canuck
Why do iI get
> THIS< tune in my mind when i look at them pics?
Posted: June 2, 2008, 8:12 pm
by blackagatha
Johnny Canuck wrote:Why do iI get
> THIS< tune in my mind when i look at them pics?
hell yes it's perfect!
you get that tune in your head because it looks like they're goin out for a good old fashioned lynchin... haha
Posted: June 3, 2008, 9:11 am
by therealjoeshmoe
so how is it lowered?? thats sweet azz!!!

Posted: June 3, 2008, 1:20 pm
by Shiny
therealjoeshmoe wrote:so how is it lowered?? thats sweet azz!!!

The Slick has a chevy 1/2 ton clip in it, fully bagged.
These trucks are unreal, love 'em!
Why isn't the slick owner on here?
-Shiny
Posted: June 3, 2008, 7:50 pm
by Phil
Shiny wrote:therealjoeshmoe wrote:so how is it lowered?? thats sweet azz!!!

The Slick has a chevy 1/2 ton clip in it, fully bagged.
These trucks are unreal, love 'em!
Why isn't the slick owner on here?
-Shiny
I think there is a Blazer clip on the front of the 66 with a 400modified in it.
the GMC is an S10 front
All bagged, the jimmy needs front shocks and requires a few more mods.
The guy with the 66 is about 18-20 yrs old.
Posted: June 3, 2008, 8:00 pm
by Johnny Canuck
Hah. Really is the good the bad and the ugly then.

I knew it!!
Posted: June 3, 2008, 8:03 pm
by FORDMANLCRACKEL
Johnny Canuck wrote:Hah. Really is the good the bad and the ugly then.

Posted: June 3, 2008, 8:17 pm
by willy3486
Slick Fan wrote:Alan Mclennan wrote:Slick Fan wrote:Man, you could step into the bed from any side & not even slow your stride!
And what is that hanging off the GMC's hitch?

Truck nuts!
That's what I thought at first, but it looks like a big steel hoop. I bet whenever that guy drops it to the ground, he knows it's home by listening to the hoop go *CLANK*!

I think that "hoop" is a hitch to connect to tractors and bulldoziers. My father-in-law had a disk that had one of those on it. It was hitched up to a bulldozier and pulled. I use it on my tractor now that he has passed away. they are connected to a hook that looks like fingers that close together. I just bolt it to a bar on my tractor. I think you connect them with this
http://www.northerntool.com/webapp/wcs/ ... 1912_21912
Posted: June 3, 2008, 8:50 pm
by Phil
Close...
Its a hook from a crane.
Also he may have said "bronco clip"
Ill get a zillion detail pix next time.
Interesting steering box setup
Box was in front of the axle, shaft had 3 U joints and a brace holding it in place.
The total shaft was about 20' long with joints etc
My buddy just showed me how to do long exposure shots

Posted: June 3, 2008, 10:27 pm
by Slick Fan
That's a cool shot! I should read my camera's instruction manual, I'd probably learn something.

Posted: June 4, 2008, 12:29 am
by blackagatha
haha same here. My cameraa can do all sorts of strange crap but allI know how to do is point and shoot!!! ha