Page 1 of 1

Man you guys are gonna hate this.

Posted: July 12, 2008, 9:08 pm
by Phil
I know this guy from the local car forum, he's about 24 or so.
He's a really good kid but after his 97 cobra blew up in front of the local car spot he combined it with his other car. A 2JZ Supra.

Its all the 8000rpm on stock internals, turbo fun but with traction.
Its actually a hell of a fab job.
He kept it a secret for aout 3 years building it and then when out and beat up on some of the local fast cars before finally popping the hood.

The whole thing cracks me up. He's really apologetic about it and a class act win or lose. Anyway, hang onto your lunch :lol:
CobraChris wrote:Well now that the secret is out and alot of people have seen it I can finally make a Project Forum on the Cupra....


Well most of you know that I own a 97 Mustang Cobra that used to have a Built and Vortech'ed 4.6 DOHC engine that had come apart in front of DGs, Well after disassembling the engine I found more internal damage, So After I sold off all my old parts I figured if I was gonna start all over why not do something new that no one has done before that will be different and still roll out... So I figure why not really make people hate and do a foreign engine like the 2JZ-GTE?

Well the project has been ALOT of work and had many challenges that no one could answer but I was able to get it done fairly quickly and kept in on the down low pretty good.

Everything was Made and Done by me, I turned EVERY bolt myself, and the only things I didn't make was the Drive Shaft and Its Couplers...

Right now its basically a stock now USDM Spec 2JZ with a BIG front mount, Full 3" Exhaust, 18psi, AC delete, EGR delete, and the Turbos Running in Parallel... But it Ran pretty good, But now its time to ditch the Stock ECU, Turbos, and Trans

Now in the near future it will be going under the big knife again! Plans this year are...
AEM and all sensors
Big Single..66mm or 76mm Not sure
Full Fuel System
Built TH400 Trans
Healthy shot of NAWZ!!!!! :lol:
Built Head
As many weight savings I can do
And what every it Take to put ALL the power down off the Trans Brake!

And over the winter have the body all cleaned up and Repainted stock Color

Ill add more later but this is a start... I just ran and snapped some pics... Still Dirty and all

Image
Image
Image
Image

For the Ones that dont know Her Past hers some pics...
Image
Image
Image
Image


And the VERY Rare never seen pic of the 4.6 runing on a Sneaky Sneaky Single Garrett GT-40
Image

Posted: July 12, 2008, 9:16 pm
by johnny
now this car should replace that coe i saw in the scrap yard just kidding looks like a great job he did on the fab he should have show horned a tri power old ford motor oh well will probably beat anything ill ever own :roll:

Posted: July 12, 2008, 9:39 pm
by Greg D
It looks like he did a very nice job putting it in. With me being a late model Mustang collector, I am sure you know what I would have done with a limited production car.

Posted: July 13, 2008, 8:54 am
by Slick Fan
Well, the value of everyone else's '97 Cobra just went up a notch...much like when one is totalled, thinning the herd. :P
With all the plumbing & wires, that new engine looks like a nightmare. Glad it ain't me.

BTW, those guys don't even have a bumper any more on those cars, do they? I see hacked off frame rails. How does the nose (bumper/fascia) not flop around like a wet noodle?

Posted: July 14, 2008, 1:29 am
by MrEvil
Well, I think everyone knows what I think of Brand X in a Ford. Install looks VERY clean though. Did he re-use the Ford Power steering reservoir? Or does Toyota source them from the same place FoMoCo does?