Page 1 of 1
Ok, who was looking for linkage for a 3spd
Posted: August 20, 2008, 8:13 pm
by 66 POJ
I thought I remembered who it was, but my wife may be right, C.R.S may be taking over. Someone here was wanting linkage for a 3spd from the column to the transmission. Fess up, I have some that I do not need.
Posted: August 20, 2008, 11:30 pm
by ezernut9mm
i believe that was me. i need it for a 61 if it is the same. i know the columns come through the firewall at a different angle, but i don't know if all 3sp linkages are the same.
Posted: August 21, 2008, 4:05 am
by 66 POJ
It was you, I remember now. Does anyone know if the linkage from a '66 will work on a '61?
Posted: August 21, 2008, 11:50 am
by ICEMAN6166
i have a complete 61-64 3 speed column and linkages at home, if you cant find one get with me next week.would really like to get rid of the truck its in, only thing left any good is the engine , trans and column.
Posted: August 21, 2008, 9:53 pm
by ezernut9mm
brian, are you saying that the 65/66 linkages are different from the 61/64s? please clarify. thx-chris
Posted: August 22, 2008, 2:40 pm
by winr
The shift rods I pulled off of Uncle Skips..oops..I mean Little Debbie in Nebraska's 64 F-100 were shorter than the shift rods in my 65 F-100.
The 64 and down steering columns are lower than the 65/66 columns thus the rods are shorter.
In the event I am wrong...it is Little Debbies fault.
Richard.
Posted: August 23, 2008, 6:57 pm
by fmartin_gila
Chris,
I think I still have the linkages off my 62. Won't be needing the linkage setup any more. Let me know if you want, and I'll check to see what I still have out there collecting dust.
Fred