Page 1 of 1

rust removal the easy way

Posted: September 12, 2008, 10:37 pm
by johnny
a friend of mine told me about a thread he wrote on the hamb im going to try it on my seat frame looks like all of us could benefit from it so here ya go it take pics on how it works for me enjoy
John
http://www.jalopyjournal.com/forum/show ... hp?t=10461

Posted: September 13, 2008, 7:38 am
by slick4x4
i have heard about this , but never tried it
looks simple enough
like the one guy said be sure to do it in a well VENTILATED place

Posted: September 14, 2008, 1:19 am
by willy3486
I have used that for years redoing metal and it works great. Some of the local Civil war buffs use it to clean civil war objects like belt buckles. I use a 150 volt power suppy though, its a lot faster. I think I posted about it a few years ago here. What it does is to release the oxidation but leave metal alone. I found some old router bits my Dad had. The bucket had got rainwater in it and they had rusted really bad. I leaned them trying it out and I could actually use the bits. As far as it goes,the polarity is critical . Print out the instructions and go by them. Do not insert anything chrome!!! It will make the chrome release.It may leave a black patina on it that can be cleaned off with water and a scotchbrite pad. Just dry it and oil or paint the metal. Other than that is simple to use. I use it to restore old woodworking machines and I even used it on some of the parts on my truck Here are a few more links.

http://www.stovebolt.com/techtips/rust/ ... usting.htm

http://myweb.tiscali.co.uk/andyspatch/rust.htm

http://antique-engines.com/electrol.asp

Posted: September 17, 2008, 10:44 am
by johnny
well everyone i tried that rust removal idea and it seemed to pretty good now i did use the washing soda they suggested could find it so i read you can also use baking soda so i did with some laundry detergent give it that fresh bubbly scent, i used rebar for my pos. terminal and the neg went to seat frame when i pulled out the part i hosed it off and brissle brushed it to get gunk. i didnt have a container big enough for whole seat so i had to do half at a time. i had a 6amp battery charger on the part for about 10 hours as soon as you put it on the water starts moving and hours later the water completely rust colored any way heres some pics.
John
Image
Image
Image
Image