Slick 60's

Gents,

I am pretty excited now. I have acquired an AODE built to take 850 HP and am ditching my SC in favour of a twin turbo set-up now that I know it can handle the power.

Should be scarey!!!

Oh these trucks are a bad addiction!

bloody hell yes! sweet dude.... Now if I could just come up with a similar setup for agatha!!!!

Man, that sounds pretty awesome! Don't hesitate to show us pics as you go.

I will show pictures for sure! For the past month or so I have been updating my avatar with the changes to the truck and engine etc...

Once I get back to the US at the end of the month I'll put together some gallery pictures.

Slick Fan wrote:Man, that sounds pretty awesome! Don't hesitate to show us pics as you go. 8)

Which ECM are you planning to use ? Aftermarket units are pretty pricey! The great thing about slicks is the room for intercoolers ,blowoff valves,wastegates and all the other hairdryer paraphenalia.Keep us posted!

I have an A9L and complete harness. The nightmare will be in tuning this beast for a reliable street application. I'd love to be able take it to the race track but I don't want to cage it. I ran into the same problem with my old stangs.

The turbo route should be interesting cause I've never done it. I should have the kit in the next month or so and will mock it up in truck for all to see.

Have any members here done a turbo on their slick? I know its been done but I haven't found any forums.

DCarr wrote:Which ECM are you planning to use ? Aftermarket units are pretty pricey! The great thing about slicks is the room for intercoolers ,blowoff valves,wastegates and all the other hairdryer paraphenalia.Keep us posted!

Steve (Elpolacko) has dual turbos on his 427......

Garbz

Mine had a iron CJ headed 460 with a Cummins big rig turbo on it. The previous owner put it together and ran 6.10's with it. I liked the idea so I decided to turbo it also. I've decided on a 472 BBF and a 91mm T-6 flange turbo. I will use a Treadstone TR-12 intercooler and a blow thru carb.

Your set-up sounds awesome! Do you mind posting picks of your build up?

What HP range are you going to be in?? 1000+

Mack wrote:Mine had a iron CJ headed 460 with a Cummins big rig turbo on it. The previous owner put it together and ran 6.10's with it. I liked the idea so I decided to turbo it also. I've decided on a 472 BBF and a 91mm T-6 flange turbo. I will use a Treadstone TR-12 intercooler and a blow thru carb.

You guys are crazy! While I'd love to drive it, I wouldn't want to own it. Hope you changed the drum brakes!!!!

I've got a tin turbo 351 based engine going in my '65 F-250 for pulling my dads '66 'stang around.

I started with the basic ebay 5.0 twin turbo kit, had the hot parts jet coated and got some good turbos (garrett 57mm, don't remember the a/r) when I get back I plan to run a 6.0 powerstroke innercooler in front of my factory radiator and dual e fans.

Stock intake manifold, custom ground cam and I will be running a blow thru carb with a procahrger carb hat, a ZF 5 speed manual trans w/ overdrive out of a '96 with a 351.

I am putting Wilwoods on all fours...

I have also decided it is going to have a four-link & IFS, both on air ride.

The truck is now going to cost much more than I wanted to spend on it originally but I guess that's the way most peoples projects go.

Gnant wrote:You guys are crazy! While I'd love to drive it, I wouldn't want to own it. Hope you changed the drum brakes!!!!

The DIY turbos are a cool way to go as well. There is a lot of good information on doing this in Turbo Forums.

I might go with a TT Cartech kit cause the company is currently located in Texas and has a long history. There are too many companies that pop up with kits and can't fill the orders a year down the road and are gone forever.

Kick some but overseas and keep us posted how your slick comes along when you get back.

STOFFER wrote:I've got a tin turbo 351 based engine going in my '65 F-250 for pulling my dads '66 'stang around.

I started with the basic ebay 5.0 twin turbo kit, had the hot parts jet coated and got some good turbos (garrett 57mm, don't remember the a/r) when I get back I plan to run a 6.0 powerstroke innercooler in front of my factory radiator and dual e fans.

Stock intake manifold, custom ground cam and I will be running a blow thru carb with a procahrger carb hat, a ZF 5 speed manual trans w/ overdrive out of a '96 with a 351.

Poweradded66 wrote:Your set-up sounds awesome! Do you mind posting picks of your build up?

What HP range are you going to be in?? 1000+

Mack wrote:Mine had a iron CJ headed 460 with a Cummins big rig turbo on it. The previous owner put it together and ran 6.10's with it. I liked the idea so I decided to turbo it also. I've decided on a 472 BBF and a 91mm T-6 flange turbo. I will use a Treadstone TR-12 intercooler and a blow thru carb.

The old set-up is in my sig. Judging from his E.t.'s and the weight of the truck he was putting around 900hp to the tires. I'm just starting on mine and like you I have a long way to go. I have the builder 460 torn down and ready to go to the machine shop. I'm planning to make around the same figures because I will be using a production block and crank. I'm closing on my new house in a couple weeks so everything is kinda on hold right now.