Page 1 of 1
HELP!!!!!!!!!!!!!
Posted: October 29, 2008, 7:29 pm
by 66Rat
Where do i find the parts for this and what is involved in the installation? Please send any links or info.
Posted: October 29, 2008, 8:05 pm
by fmartin_gila
That looks like a good start for something. You need to give more info on what your intentions are.
Fred
Posted: October 29, 2008, 8:29 pm
by 66Rat
IM TRYING TO FIND OUT HOW TO DO THIS I FOUND THIS ON THE INTERNET AND I NEED INFO. I WISH IT WAS MINE I WANT TO KNOW WHERE TO GET THE BAGS AND WHAT BAGS TO GET AND HOW FAR WILL IT LOWER.
Posted: October 29, 2008, 9:28 pm
by johnny
well to begin with the only ford on that is the rear end motor tranny and beams the frame isnt a truck frame kinda looks 30's era
john
Posted: October 29, 2008, 10:15 pm
by 36truck
Johnny I agree I think that frame is a 32 Ford. 66rat you need to check out the street rod mags to come up with an air ride system.
Posted: October 29, 2008, 10:34 pm
by 6166 Junkyard Dog
air bags not my way of thinking, oh yes good for slamming on the ground, but everday use that a truck might encounter well I pass
Posted: October 29, 2008, 10:37 pm
by Garbz
Some one trying to do this on the cheep...It is an early chassis.
http://www.fatmanfab.com/catalogpage.php?page=2
Man that should evil handling...
Garbz
Posted: October 29, 2008, 10:48 pm
by 6166 Junkyard Dog
Dave its 9:00 PM in AZ Do you know where your slick is ??
Posted: October 29, 2008, 11:29 pm
by Alan Mclennan
No not a 32 Ford chassis!, they weren't parallel and they pinched in in the front!
Alan,
Posted: October 30, 2008, 12:14 am
by Garbz
Outside alongside the house with no brakes....With the big crew in front with no brakes....
Garbz
Posted: October 30, 2008, 12:17 am
by 6166 Junkyard Dog
who need brakes on I-10 when its bumper to bumper cars,, hahahahaha!!!!!!!
Posted: October 30, 2008, 6:26 pm
by blackagatha
well, Older setup or not, I would think that you could do that on your truck pretty easy, assuming its already a twin-I. Just get the bags anywhere, they're all over the place, and go to town with a little oldschool ingenuety and fab up some upper mounts and good to go....
Posted: October 31, 2008, 12:53 pm
by 66Rat
i have 3 slicks 1 63 and 2 66 and im debating with my self on what frame to use, they both have there advantages and disadvantages. now if those radius arms in that link would work for the 63 then i could just use that frame that will leave me with no camber problems. and it is't going to be a daily driver its going to have big block i cant afford to drive it all the time.
Posted: October 31, 2008, 8:44 pm
by DCarr
I have a big block and it is my daily driver. I hope everyone saves gas so I can have more. LOL. If you decide to bag the 63 please post pics. Thanks.