Page 1 of 1
Whats it called
Posted: January 14, 2009, 10:56 pm
by f100matt
OK, so i am getting ready to reassemble the truck. when i took it apart sandwiched between the fender and inner fender, and between the fenders and the valance was some sticky stuff, some kind of sealer or weatherstripping or somthin that i can only assume was used to dampen rattles and squeaks between the sheet metal. If anyone knows what i am talking about, what is it and where can i get it, thanks.
Posted: January 14, 2009, 11:03 pm
by Bill W
I think it's called finder welt, lmc sells it, but if you ask me, i would go with somthing else... from a caulking tube like what the factory used. the stuff i bought was too thick! IMHO
Posted: January 15, 2009, 12:48 am
by Alan Mclennan
Mac`s have it and they call it, fender to body sealer,C1tb-16246-PR 11.95$ by my cattledog but it`s 2004 model.
Posted: January 15, 2009, 1:08 am
by DCarr
Monkey s**t. NAPA.
Posted: January 15, 2009, 7:44 am
by Max
Posted: January 15, 2009, 5:11 pm
by Bill W
DCarr wrote:Monkey s**t. NAPA.
good one!
Posted: January 15, 2009, 7:27 pm
by Garbz
And the glue for the door gaskets is "Gorilla Snot", No shit,.
Garbz
Posted: January 15, 2009, 10:39 pm
by Johnny Canuck
you don't say....
Posted: January 15, 2009, 11:13 pm
by ICEMAN6166
the black glue is gorilla snot , yellow is sheep snot.
Posted: January 15, 2009, 11:16 pm
by slick4x4
YECH !
now that is down right nasty !
Posted: January 16, 2009, 3:37 pm
by Slick Fan
Posted: January 16, 2009, 6:33 pm
by 65f100_Thug
I boogied in the bedroom, I boogied in the hall ,I boogied on my finger, and wiped it on the wall.
what's it called
Posted: January 16, 2009, 8:34 pm
by dbgrandpa
I used caulking cord. It comes in a roll about 1" wide that can easily be "torn" into 1/4" strips. Has the consistency of putty. It is available at any hardware or home building center in the weather strip dept. Just keep it slighty warm to make it easy to use.