Page 1 of 2
1964 f-100 front suspention Help please!!!!
Posted: January 31, 2009, 10:11 pm
by Farmboy
I have just bought a 1964 f-100 short bed custom cab in really good shape. Well all except for the bed floor. I was looking for a 1966 but this one was just too nice to pass on so now its in the garage. I would like to change the front suspension to independent and get ride of that straight axle. will a 65 or 66 front suspention work on it. Also does anybody make a bed floor or will I have to use my imagination? Any help would be much appreciated. The bed is super nice and straight if it just had a floor in it that was in better shape!
Posted: January 31, 2009, 10:17 pm
by DCarr
Welcome to the club from ElCajon, Farmboy!

. Don't be real quick to discount the straight axle, though. They work well when set up properly. If you want independent go with the Dodge Dakota setup from Industrial Chassis in Phoenix ,AZ.
Posted: January 31, 2009, 10:17 pm
by Greg D
For your bed floor you can buy patch panels and fix it or find a wrecked bed with a good floor.
As far as the suspension swap there are alot of options but straight axles rule! You also have alot of options with straight axles, read through my Uni's build thread an you'll see. There are few I haven't done yet too, look through Hints section. Here is a link to my truck...........
http://fordtruk.com/forums/viewtopic.php?t=9003
Posted: January 31, 2009, 10:24 pm
by ezernut9mm
welcome aboard! you wanna trade??? lol. i have most of a 66 swb with a disc brake front end. ran when parked. heehee!
Posted: January 31, 2009, 10:27 pm
by DCarr
Ezer, you're a shameless horsetrader. Just got to have a 64 ,don't you?

Posted: January 31, 2009, 10:34 pm
by ezernut9mm
there is no such thing as pride when it comes to short straight axles. lol. who am i kidding, i don't have any pride anytime. lol
Posted: January 31, 2009, 11:25 pm
by slick4x4

from KANSAS
we need some more farmers in here !
Posted: February 1, 2009, 11:16 am
by Truckfarmer2
Welcome to another farmer! Where are you from? There are dozens of choices for your truck depending on your projected use, skills, and budget.
Posted: February 2, 2009, 1:45 pm
by Farmboy
Truckfarmer2 wrote:Welcome to another farmer! Where are you from? There are dozens of choices for your truck depending on your projected use, skills, and budget.
Im from Tennessee. At the foot of the Smoky Mtns. I work for a utility district and farm on the side. Thanks for making me feel welcome. I'm building amild street/daily driver out of the old girl and just want a good driving,riding,running truck that can answer the bark of the small block chevys. Eveyone I work with accept a couple or chevy guys and the think I'm nuts for even likeing Fords. I tell them that owning a chevy truck is like cleaning up after a 2 year old toddler.(you know,sweeping up the rust and all). And I like to shut my truck door without first picking up on it. And then theres that rattle comming from the dash! I could go on all day but you get the picture. I would like to put power steering to her and disc brake. I've also got a hot little 351 winsor and c6 combo planned. I am particularly after a 327 that a big mouth buddy of mine owns. And I AM gonna get him one way or another.
Posted: February 2, 2009, 1:53 pm
by Farmboy
DCarr wrote:Welcome to the club from ElCajon, Farmboy!

. Don't be real quick to discount the straight axle, though. They work well when set up properly. If you want independent go with the Dodge Dakota setup from Industrial Chassis in Phoenix ,AZ.
I'm just not familiar with the straight axles. I may be screwing up and just don't know it. What I'm after is a decent ride and good handling and stopping. What type of power steering fits it. I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
Posted: February 2, 2009, 1:57 pm
by Farmboy
Greg D wrote:For your bed floor you can buy patch panels and fix it or find a wrecked bed with a good floor.
As far as the suspension swap there are alot of options but straight axles rule! You also have alot of options with straight axles, read through my Uni's build thread an you'll see. There are few I haven't done yet too, look through Hints section. Here is a link to my truck...........
http://fordtruk.com/forums/viewtopic.php?t=9003
Fine looking ride you got there. Hope mine turns out that good.
Posted: February 2, 2009, 2:48 pm
by 61 Merc
Farmboy wrote: I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
Well this must be first for this club.
A straight axel can be set up quite nice, even with armstrong steering. If you do go independent, go to the dakota front end, it is not worth the effort to graft a twin I beam onto the front.
For a new bed floor, there was an article about using a newer F150 bed that had good dimentions. Drop Tom a line at Flashback F100's as he deals with new and used parts.
PlcThom@AOL.COM
Welcome to the club, had a chance to cruise some of that area a few years ago, you'll have to get it done for the Smokey Mountain F100 run.
Dean
Posted: February 2, 2009, 3:37 pm
by BackyardRest
I found the 2008 F250 bed floor is correct in dimensions. The stamping is a touch different but works out well. The corners are not as sharp as the earlier bed floors as in these pics.
Approx 200 spot welds to take out when removing floor
Mark-K makes a stainless/wood floor which is another option.
I did something a while back on bed replacement but my pics are gone but plan on re-posting them soon. ALong with when I actually install the new 2008 floor

Posted: February 2, 2009, 3:43 pm
by BackyardRest
Posted: February 2, 2009, 4:03 pm
by 61 Merc
I thought it was you BackyardResto that did the swap, was it posted in your Project Sideoiler post? I know I was looking for it last fall also, couldn't find it then either.
Dean
Posted: February 2, 2009, 4:45 pm
by jwh f-100
BYR,
I want to do the same thing. I looked at two smashed beds last year but both floors were a bit dinged up for my liking.

I guess I need to price a new floor......
Did you remove the Xmembers from the superduty bed yet?? I'd be interested in how you make out with that....
Posted: February 2, 2009, 4:54 pm
by kenk96
Greg D,
You stated that patch panels are available for the '64. iIcan only find them for '67 and newer. Any ideas?
Posted: February 2, 2009, 6:07 pm
by Johnny Canuck
Farmboy wrote: just want a good driving,riding,running truck that can answer the bark of the small block chevys. Eveyone I work with accept a couple or chevy guys and the think I'm nuts for even likeing Fords. I tell them that owning a chevy truck is like cleaning up after a 2 year old toddler.(you know,sweeping up the rust and all). And I like to shut my truck door without first picking up on it. And then theres that rattle comming from the dash! I could go on all day but you get the picture. I would like to put power steering to her and disc brake. I've also got a hot little 351 winsor and c6 combo planned. I am particularly after a 327 that a big mouth buddy of mine owns. And I AM gonna get him one way or another.
Indeed them peckers need to be beat back down in the snake-hole they came from time to time.

It's up to you to do it.

Posted: February 2, 2009, 7:40 pm
by Farmboy
61 Merc wrote:Farmboy wrote: I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
Well this must be first for this club.
A straight axel can be set up quite nice, even with armstrong steering. If you do go independent, go to the dakota front end, it is not worth the effort to graft a twin I beam onto the front.
For a new bed floor, there was an article about using a newer F150 bed that had good dimentions. Drop Tom a line at Flashback F100's as he deals with new and used parts.
PlcThom@AOL.COM
Welcome to the club, had a chance to cruise some of that area a few years ago, you'll have to get it done for the Smokey Mountain F100 run.
Dean
Thats the way it is with us greenhorns I guess. Pigeon Forge is just up the road from me. And Knoxville is down the road a mile or two so I will get to hit all the shows in this area. Drop me a line when it gets a little closer to the shows and I will look you up. I'm just glad to be here among the ones who know these trucks in and out. Thanks
Posted: February 2, 2009, 8:38 pm
by Greg D
I think the rib pattern is the same in 67. If you are willing to travle I may be persuaded out of the swb 62 bed I have in my backyard - the floor is pretty much perfect. Enough $ to get me the later 250 floor would do it so I could get a 8' and save myself patching.