Page 1 of 1
Convert 1966 f250 truck to 4wd
Posted: February 8, 2009, 8:50 pm
by ermcswain
I would to find a late model ford 4wd truck which I could switch my 1966 f 250 cab and bed to the 4wd frame and restore as a 4wd vehicle. If remember correctly my truck has a 131 inch wheelbase. Does anyone have any experience switching a 66 2d to 4d. thank you
Posted: February 8, 2009, 9:07 pm
by 36truck

from Mi. With a 131 wheelbase on your truck a newer one has 133 wheelbase. Might be able to cheat that. How about the floor for the trans hump?
Posted: February 8, 2009, 9:50 pm
by FORDMANLCRACKEL
Richard,

as far as the transmision hump use the removable cover from the doner truck. Its the black piece in the pic. below. Worked for me.
Lonnie
Posted: February 8, 2009, 11:24 pm
by Anthony
welcome aboard ermcswain from West Virginia. Where are you located? my 66 is on a mid 70's highboy frame....after removal of the bed..[albumimg]4908[/albumimg]...donor truck..[albumimg]4909[/albumimg]....frame cleaned and painted..[albumimg]4263[/albumimg]....body back on..[albumimg]4230[/albumimg]....body back off and how she sits right now..[albumimg]4882[/albumimg]...I believe that the gap between cab and bed will be a little wider but not too noticable, it wasn't on the white truck when I brought it home.

.Anthony
Posted: February 9, 2009, 9:17 am
by in2hotrods
Welcome to the board! What is your location? There are members here from all over...someone might have just what you need. For example. Next weekend I should be dragging home a 1966 F250 4x4 to part out. Interested? PM me.
Rich
Posted: February 9, 2009, 9:59 am
by don morris II
hi from michigan

Posted: February 9, 2009, 8:02 pm
by otterbull
I have a 65 currentlt sitting on a 78 frame. Cab bolts right up. I still need to mon=ve the rear spring hangers foreward 2.5 inches If I remember right. Havent worked on it for a while. In ohio not to far from you I believe. Bull