Page 1 of 1

Good deal on a CPP disc brake kit...........

Posted: February 27, 2009, 3:09 pm
by Greg D

Posted: February 27, 2009, 6:40 pm
by in2hotrods
That one ended. Here's a new one from same seller:

http://cgi.ebay.com/ebaymotors/1957-64- ... QQtcZphoto

Posted: February 28, 2009, 8:42 am
by Gary Seymour
Got one!! :D

Free shipping and no sales tax put it over the top of runnin down to O'Reilly's.

Posted: February 28, 2009, 11:35 am
by Greg D
That is less $ than I spent piecing it together. I was able to piece it for a little less than their regular price though.

Posted: February 28, 2009, 8:36 pm
by Gary Seymour
Thanks for the tips! That gets the ball rollin on that piece of the puzzle!

Posted: March 1, 2009, 12:51 am
by blackagatha
they say Truly A BOlt On....

Yes, it IS bolted on, but it wasnt QUITE that easy. you Do have to grind the whizz out of the edges of the bracket where it bolts to spindle, AND EVERY caliper you ever install on them because they dont account for a stupid HUGE casting ridge on the calipers. Also the cutout is too small, so you have to grind down the circle around the piston.

Maybe they have updated design since I got mine in '05. hope they did.

Also, for Preliminary "fitment and testing" DO NOT install the Ovalated Nuts. They work by gouging into the threads, and after they have been put on and off just a few times, all the threads are coming off the bolts in shreds.

For that matter, consider THROWING THE OVAL NUTS AS FAR AS YOU CAN and investing in some Red Locktite.... Much less damaging. Even More "temporarily" Permanent.

Posted: March 1, 2009, 1:23 am
by Greg D
The only mod I made to mine was grinding the ridge off of the calipers - bolted right on.

Posted: March 1, 2009, 3:43 pm
by otterbull
Just ordered one. Talked the wife into it !!!!!! :lol: :D

Posted: March 1, 2009, 10:29 pm
by Gritsngumbo
That is a good price, thanks Greg. I like the free shipping and no sales tax.

Posted: March 6, 2009, 6:18 am
by 64 f100
Warning Warning Warning. These people will screw your eyes out, if you don't buy it directly off Ebay. I put a warning up before about these people, over this same disc brake kit. I just picked up the phone and called these people about the brake kit, and asked specifically about the Ebay price with the shiping. Was told I would get it, so I upgraded to the better rotors and even bought a power master cylinder kit for 239 quoted price. ;lGuess what, I got billed for 100$ in shiping isnstead of 40 shiping on Ebay, and billed 300 for the booster kit plus shipping. This was three months ago, and I'm still fighting with these people over it.

Rich