Page 1 of 1

Updated Suspension with Stock Ride Height???

Posted: March 17, 2009, 4:42 pm
by 64Ranger
I have been real interested in all these Dakota front ends that are being installed in these straight axle trucks. I like the feel and control of the new suspensions, but I don't want to lower my truck. I like the way it sits. Does anyone know of any updated front suspensions that will keep the stock ride height?

Thanks in advance.....

Posted: March 19, 2009, 9:13 pm
by jeepbut
Somebody please answer this man's question! Thanks, Lyman.

Posted: March 19, 2009, 9:16 pm
by slick4x4
I would like too , but my knowledge wont fill up a 1 page notebbook :hm:

Posted: March 19, 2009, 9:59 pm
by Alex
I would also like to know. Anybody?? SUA SPONTE

Posted: March 20, 2009, 12:04 am
by DCarr
According to what I've seen & heard on the conversion on Garbz' truck he went with a 2" Z in the frame & 2'' dropped spindles.
So if you installed all stock stuff it would be at least 4inches higher than his. Maybe you could use longer springs
for more height?

Posted: March 20, 2009, 6:28 am
by matt2491
I think I read that the Dodge Dakota can be set up to within an inch of the stock height spec.

Posted: March 20, 2009, 11:01 am
by 64Ranger
Thanks Lyman for the push...

That is interesting DCarr and Matt...I guess I should check with Industrial Chassis Inc. to get the real answer to that question.

Thanks for the responses guys...does anyone else know of any solutions to this problem??

Thanks,

Lift kit

Posted: March 20, 2009, 11:26 am
by bluebolt

Posted: March 20, 2009, 6:03 pm
by castruck_1964
Doug Believe previous poster is correct 1 inch difference with stock components and uncut springs

Posted: March 20, 2009, 6:31 pm
by Greg D
I'd say give Steve a call, I'm sure he'd be glad to fill you in.

Posted: March 20, 2009, 10:36 pm
by itsmywifestruck
Can you crank the torsion bars on the volare up high enough to get stock ride height?


ROb