Looking for core support mount kit cheaper than $49

rcb1020 · Post by **rcb1020** » February 5, 2012, 6:16 pm

I've checked NPD , Dennis Carpenter , Obsolete , Macs and LMC for a new radiator core support mount kit to the frame. LMC so far is the cheapest at $49.00 Anybody seen them for less ? Says 65 to 72 is the same , is that correct ?

ICEMAN6166 · Post by **ICEMAN6166** » February 5, 2012, 6:26 pm

all that grief in looking for a core support which you ended up getting a great deal on now you want to get some cheap chinese rubbers and bolts for it?

buy the best quality ones you can find, not the cheapest.

rcb1020 · Post by **rcb1020** » February 5, 2012, 6:39 pm

Hahahaha ! I don't like LMC stuff , the going price seems to be $60 , I'll pay the $11 extra from Dennis Carpenter , just checking to see if there's somebody I'm missing who has them at a better price.

Post by **Greg D** » February 5, 2012, 10:01 pm

Made my own - look in my build thread.

cwindsor · Post by **cwindsor** » February 5, 2012, 11:16 pm

Made my own too...

6166 Junkyard Dog · Post by **6166 Junkyard Dog** » February 6, 2012, 1:20 am

HEY I Will match that price on LMC support

forgot to tell you that I will match it only in Quality and that goes for that part LMC HAS I will match it for Quality so in other words NO causes any less in prices is junk

sorry could not resist this answer

Gatkpartz6179 · Post by **Gatkpartz6179** » February 7, 2012, 12:20 pm

job lot automotive in n y had kit if they are still in business..Makin the kit is easy once you have the right biscuits.. grade 5/8 bolts nuts washers are at you neighborhood tractor supply store, same with cab mounts

Post by **Greg D** » February 7, 2012, 8:19 pm

This page shows the pieces -
next page is a pic of the 1/4 thick rubber belting the biscuits were cut from.

viewtopic.php?f=32&t=15942&start=160

rcb1020 · Post by **rcb1020** » February 7, 2012, 8:35 pm

4 large fender washer , 4 pieces of round rubber , 2 bolts , 4 small washers and 2 nuts for a 65-66 I think I can make my own for around $10 Thanks for the postings guys ! and Pete ... they are still in business http://joblotauto.com/ another catalog for me to order.

rcb1020 · Post by **rcb1020** » February 8, 2012, 7:57 pm

Got a price from Job Lot Automotive , $30 for the kit part # C1TZ-8125-S http://joblotauto.com/

Will have to ordered it over the phone , their website is not setup to place orders by credit card online

6166 Junkyard Dog · Post by **6166 Junkyard Dog** » February 8, 2012, 8:52 pm

Better check on that part number cause CITZ-8125-S Is the part number most of use for 61/64 trucks only

rcb1020 · Post by **rcb1020** » February 8, 2012, 9:24 pm

Yeah ....just looked it up , should be C4TZ-8125-S I'm still going to call and check his prices

Looking for core support mount kit cheaper than $49

Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49

Re: Looking for core support mount kit cheaper than $49