Is this head from a 361
-
tomrooster
- Posts: 613
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Is this head from a 361
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
-
daleshotrodshop
- Posts: 18
- Joined: August 1, 2013, 4:11 pm
- Location: Loveland,CO
Re: Is this head from a 361
That is a pretty rare head. 1958 352 heads with a machined 69cc combustion chamber and large ports. These came with adjustable rocker arms. They are should sell for quite a bit. These are pretty much the same as the 406 ran.
If we learn from our mistakes I should be Einstein by now.
-
tomrooster
- Posts: 613
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Re: Is this head from a 361
Yeah it did have adjustable rockers on it . Thanks Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: Is this head from a 361
1958 Edsel FE 361 is a slight overbore of the 352, was only used in 1958.
361 FT engine is not the same, used in 1964/78 500 and larger series trucks.
361 FT engine is not the same, used in 1964/78 500 and larger series trucks.