too much stuff.

ezernut9mm · Post by **ezernut9mm** » October 15, 2014, 8:11 pm

i don't know where to begin. i need one of those organizer ladies from the hoarding show.

Country · Post by **Country** » October 15, 2014, 8:43 pm

I thought you had taken a picture of my garage. I finally had to box and label the plastic tubs with my treasure. Then of course i stacked them against the wall and acquired more stuff. Look at it this way, you are not a hoarder of parts for one of the best trucks ever made actually you are preservationist of Americana..... yeah thats it..... Just down the road from ya in NW Ark.

Toyz · Post by **Toyz** » October 15, 2014, 8:49 pm

It's not too much until you can't get your trucks in the shop because of all the truck parts!
Paul

deadheadno1 · Post by **deadheadno1** » October 16, 2014, 10:47 am

Toyz wrote:It's not too much until you can't get your trucks in the shop because of all the truck parts!
Paul

I reached that point fifteen years ago!!!!!
Tom

ICEMAN6166 · Post by **ICEMAN6166** » October 16, 2014, 11:48 am

i miss my piles of parts

its only called hoarding by those who are envious because they cant

the bus and the van box were so full you could not safely walk thru and i was very happy

the yard was full of trucks

i could go on but the sadness is too extreme.
i never though it too much and continued to hunt.

ezernut9mm · Post by **ezernut9mm** » October 16, 2014, 7:38 pm

yeah, as i organize all of this i will have more room and continue to collect. i have basically an entire rust free truck minus chassis and running gear heading this way when i get the energy to go get it. i have no idea where i am gonna put all of that.
brian, it sucks that you left all of that up there for the mooses and bears to hang out with. look at it like this, at least you can start all over. lol

624WD · Post by **624WD** » October 20, 2014, 8:16 pm

it's easy. Don't toss the 6 pack holders. put your Busch cans back in it when you're done. This should free up some space on your bench.

Leeroy · Post by **Leeroy** » October 21, 2014, 4:43 am

That's a whole lotta stuff BOTH of you!

Now hurry up and put it all in a 40' container and send it to me please..... I will take good care of it for you!

Truckrat · Post by **Truckrat** » October 24, 2014, 5:25 pm

Chris are those a couple of 66 door trim pieces in that second pic?
Would you have any more pieces for a 66? I have a 66 bed with the trim
on it like that. Thought I'd try and find the rest of it if I could. Let me know
what you have, ok. TR

ezernut9mm · Post by **ezernut9mm** » October 24, 2014, 11:30 pm

gary, yes those are the door pieces. i think i have the hood and cowl and corner pieces too. i will have to look. i dont remember now. lol.

Alan Mclennan · Post by **Alan Mclennan** » October 24, 2014, 11:54 pm

I could do with a V8 bonnet badge and storage for 22 months if someone could manage that !

.......... here`s some of my bits!

ICEMAN6166 · Post by **ICEMAN6166** » October 25, 2014, 10:05 am

Alan Mclennan wrote:here`s some of my bits!

nice

makes sense you would have to have something with toes up there too

Alan Mclennan · Post by **Alan Mclennan** » October 25, 2014, 6:08 pm

ICEMAN6166 wrote:
Alan Mclennan wrote:here`s some of my bits!
nice

makes sense you would have to have something with toes up there too

You know Brian, I didn`t even think of that mate!... it was on Lenore when I got her, I had one on my Morrie 1000 back in the day !

did you notice the plate you gave me?, I still remember all the names of the people that gave those plates to me...it`s written on them

, the majority of them are still over the bar inside Tho!

ICEMAN6166 · Post by **ICEMAN6166** » October 25, 2014, 6:43 pm

i did see the plate, remember giving it at SS
i have 2 from Australia hanging up out in the barn
1 from Victoria and 1 from Tasmania

Truckfarmer2 · Post by **Truckfarmer2** » October 25, 2014, 7:51 pm

Alan, nice collection! I see my old vanity plates. Glad to know they went to a good home.

Alan Mclennan · Post by **Alan Mclennan** » October 25, 2014, 10:30 pm

Thanks Greg, that is a great plate and probably not easy to replace, I know the Ontario plate was the subject of a wide search for a while.... well until Kenny remembered he gave them to me at SS3

, and the Penn plate still has Garbz`s sons DNA on it!

....all good stories and great memories as well!

charliemccraney · Post by **charliemccraney** » October 28, 2014, 3:28 pm

It looks like you are on the right track. You just need shelves to get everything off of the floor.

too much stuff.

too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.

Re: too much stuff.