that paint is gorgeous

been a couple of years since I last did it.. but I'm pretty sure that I had to pull the axle nut off.. i think that the drum forms the outer race for the wheel bearings

i think its a pretty hot truck.. im not sure i'd want the rear flares on mine... but other than that i think it looks awesome...

I'm not sure what the etiquette for posting pics of other people's trucks are.. but I saw this truck a few blocks away from my house and have never seen a bed like this before...

[albumimg]2215[/albumimg]

[albumimg]2216[/albumimg]

[albumimg]2217[/albumimg]

how are you working on the bottom of the cab? do you mean from the inside?

does anyone have a good way to tilt the cab on its side without ruining it?

edit: sorry to hijack =)

wow, thats nice looking

I want to see some pics of it installed =)

What kind of axle can you use with that?

this past weekend I started doing the scrape & paint on my frame... I had quite a bit of rust (including some flaking in the rear shock mount brackets) i used a 5" wire cup in a 7" angle grinder to get all the loose stuff off. Then I washed it with soap and water... then i sprayed &quo...

I'm planning on doing it. More for space concerns than for safety ones. I'm currently looking for mustang tanks now.

That square tube is some of that U channel.. I"m not sure what it's called.. It's not C channel.. and it's not square tube...

then the PO notched it a couple of times and bent it. It's held on via pop rivets

I posted pics of my cab mounts and my floor.. in my profile

I'll take another look at the bottoms of the mount. There's no way the vertical parts are going to be a problem anymore because its been redone with 1/4" plate.. But i do need a hole there. I'll snap a photo of the mounts too to show you what I"m working with.

I'll get some pics up soon. The drivers side front cab mount looks good. The passenger side has been rebuilt using what looks to be 1/4" plate. I think the bolt requires an access hole on the front of the cab mount? on the rebuilt one, i dont have a hole.. so I'm probably going to have to cut o...

The PO of my 66 had done a hack job of replacing the floor pans in front of the bench with a couple pieces of 1/4" thick diamond plate. There's a huge strip of rust under the bench that he replaced with a piece of tin and some rivets. So I want to put this floor back together. I'm not concerned...