radio delete plates for 61-66 f series.

ScottRod · Post by **ScottRod** » January 26, 2010, 2:40 pm

Ah, yes. Mine too

unibody madness · Post by **unibody madness** » January 26, 2010, 5:55 pm

In for a penny,
in for a pound.I have both normal and economy size holes in my slicks, why not one of each?
we all know how rare these slicks are and there will never be a market for them,Right? cause they are super rare Right?
Don't think you will have a problem selling them. I know I need three.

Alan Mclennan · Post by **Alan Mclennan** » January 26, 2010, 6:10 pm

Option 3 is gaining support!

ezernut9mm · Post by **ezernut9mm** » January 26, 2010, 10:01 pm

Alan Mclennan wrote: Option 3 is gaining support!

it's a coup. lol.

i am going to forward a link to this thread to shayne and see what he thinks.

HOOK&GO · Post by **HOOK&GO** » January 27, 2010, 3:03 pm

I have the original radio holes and I would be willing to let you test fit on mine

i like them all

thrush544 · Post by **thrush544** » January 27, 2010, 3:14 pm

I have a large lunchbox opening in mine along a nice speaker hole in both my door panels. At this point I'm thinking of filling them with a radio/cd player and speakers. Thant way I can listen to Montgomery Gentry on the way to Iowa

ezernut9mm · Post by **ezernut9mm** » January 28, 2010, 11:30 pm

there ya go thrush.

he's willing to do aluminum, it's just gonna cost more. he also likes the idea of just not having tabs and using some two sided tape like what holds newer car trim emblems on. i'll keep you all posted.

Riverside Racer · Post by **Riverside Racer** » February 25, 2010, 1:27 pm

I'm thinking of making a repair piece, blank or with the stock holes.

I know that I can weld mine in. For those who can't, I bet a flanged piece with some JB Weld on the back would allow you to use body filler on the front to smooth it out.

I have a really large hole in my dash, 2"x 7.25". Must have been an 8 Track!

Who has the biggest radio cut out?

F7BIGJOB · Post by **F7BIGJOB** » March 24, 2010, 5:49 pm

Hey Chris, I'd be very interested in the lightning/gear to replace my Fairlane delete plate-Steve.

MadMaxetc · Post by **MadMaxetc** » March 24, 2010, 6:02 pm

BarnieTrk wrote:ezernut,
I like the idea.... I like the lightning and gear design.

When considering a plate to cover the 'garage door opening' holes, if possible, you might want to consider making the plate out of fairly thin aluminum or like material that could be shaped (maybe by the buyer - maybe not) to conform to the curve of the bottom of the dash. I've seen some holes that go down into the curve of the dash, so a curved plate could/should take that into consideration. In fact, if the cover extended from the midline of the dash down and to the end of the dash curvature, then any and all garage door holes would be covered.

Just a thought,,,,,,,,, Good Luck!

BarnieTrk

It would have to be formable because you never know where they cut the hole.

slickmainer · Post by **slickmainer** » March 24, 2010, 9:03 pm

looks nice, i like the logo

radio delete plates for 61-66 f series.

would you be interested in a delete plate?