
Why I don't like closed knuckle axles-Ice, this is for you!
Why I don't like closed knuckle axles-Ice, this is for you!
The rather thin walls of the u-joint housing (roughly half as thin as an open knuckle design) makes things like this an all too common occurence. This was playing in the snow. Yeah, snow...the no traction white stuff that is supposed to be easy on parts because of that lack of traction.


My Slick is rustier than your Slick! 
That looks like it was a real joy to get back home. 
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
- 64fordf100292v8
- Posts: 150
- Joined: July 20, 2006, 6:34 pm
- Location: Billings, MT
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

OUCH!
20+ years using those and some serious mudding and off roading and i never have done that before.
i have blown up a couple ring and pinions in the disc brake fronts but nothing i could not get home on my own.
i replaced the bearings in the knuckles many times, had a few loose ones and worn races but not seen anything like that.
which broke first, the u-joint or the knuckle?
sorry to see that happened to you, no fun for sure.
still i am not going to change any of my front ends because of seeing a broken one.
20+ years using those and some serious mudding and off roading and i never have done that before.
i have blown up a couple ring and pinions in the disc brake fronts but nothing i could not get home on my own.
i replaced the bearings in the knuckles many times, had a few loose ones and worn races but not seen anything like that.
which broke first, the u-joint or the knuckle?
sorry to see that happened to you, no fun for sure.
still i am not going to change any of my front ends because of seeing a broken one.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Haha! Yeah Ice I didn't think you'd change your mind. I am pretty sure the U joint grenaded first. The axle of course broke too.
64ford, I am "upgrading" (depending on your point of view
) to a '78 F250 axle with high pinion diff and disc brakes. At the same time, I will put in '78 F250 PS and use F350 brake booster and MC. Should be a huge improvement in braking and steering. And, I hope strength. I don't really wheel this thing too hard, that's what I have my Jeep for.
64ford, I am "upgrading" (depending on your point of view
My Slick is rustier than your Slick! 
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

Comet, out of curiosity was that the small or large version of the closed knuckle?
going to part the axle out or just pitch it? i could use a few spare parts. really just the drums, maybe hub/spindles if they are still in good condition.
going to part the axle out or just pitch it? i could use a few spare parts. really just the drums, maybe hub/spindles if they are still in good condition.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Nope, just a big snap! I was done after that. I tried to fix it to get it home, but I couldn't even unlock the front hub. It was bound up too tight and I broke the plastic dial trying. The good news is that this is an upgrade I have been wanting to do and planning for for some time. So I have all the parts for the swap. But it will require some fabbing on the frame for the PS box swap. And, my floor jack just broke too, so I need to go get one before I start on this.
My Slick is rustier than your Slick! 
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

guys, that is the failure area. only thing missing is the rest of the lower ear.
there are cone and roller bearings that go in the top and bottom, with a bolt in type "kingpin" in the center,the rest of the casting, spindle and hub are attached to the part in the pic and rotate on the bearings when turning and are held up by them.
i would like to see a pic of the wheels and tires Comet used, as i think they were wider wheels and tire than stock, putting the weight farther out and more strain on the knuckle.
i also dont have plastic knobs on my lockout hubs, they are the stock aluminum ones called hublok.
there are cone and roller bearings that go in the top and bottom, with a bolt in type "kingpin" in the center,the rest of the casting, spindle and hub are attached to the part in the pic and rotate on the bearings when turning and are held up by them.
i would like to see a pic of the wheels and tires Comet used, as i think they were wider wheels and tire than stock, putting the weight farther out and more strain on the knuckle.
i also dont have plastic knobs on my lockout hubs, they are the stock aluminum ones called hublok.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

- ripsnorter
- Posts: 607
- Joined: November 12, 2006, 5:23 am
- Location: Washington State
heh. oinklette will be happy to hear youre a CSI fan Ice
she loves that show.
there used to be a mudhole next to the freeway near here that we passed a couple of times a week. They played in that thing for several years til one day we went into town we saw an old 70s (dentside I think) hi-boy playing around, on the way back we noticed the same truck all alone in the middle of the mudhole, its front axle laying about 10 yards away. it looked so forlorn sitting there with its nose buried in the mud that it looked like some big lost puppy
for some reason after that they never played there anymore
there used to be a mudhole next to the freeway near here that we passed a couple of times a week. They played in that thing for several years til one day we went into town we saw an old 70s (dentside I think) hi-boy playing around, on the way back we noticed the same truck all alone in the middle of the mudhole, its front axle laying about 10 yards away. it looked so forlorn sitting there with its nose buried in the mud that it looked like some big lost puppy
for some reason after that they never played there anymore
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

i used to go play in a hole like that.over the years people lost so many chains and winch cables from breaking when being pulled out when stuck ,when they started wrapping up on our axles and driveshafts we stopped going there too.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- adrianspeeder
- Posts: 509
- Joined: August 6, 2006, 8:09 am
- Location: Harrisburg PA / Dover AFB DE
- Contact:




