Ignition advive on my Bumpside project.

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
dotcentral
Posts: 1341
Joined: August 18, 2006, 5:13 pm
Location: Charlotte, NC

Ignition advive on my Bumpside project.

Post by dotcentral »

I have a 351W I got from a friend. Recently rebuilt, was warmed up a little, but no real idea on HP or torque. This is going in my 71 F100 shortbed. Will run an AOD and either a 600 or so Edelbrock or Holley vacuum secondary carb.

My problem. I did not get the distributor, and my friend seems to have lost it. So, while that sucks and creates yet another expense, it sort opens up my options.

My goals are easy starting, dependabilty, good performance. I hope to use this truck as my daily driver. As I see it, the options are:

1. Hit the yards and get either a duraspark dist. or something earlier without duraspark and do a pertronix upgrade. I think I'd prefer the non-duraspark route, but not dead set against it.

2. Buy a so-called rebuilt Dist. from NAPA, Autozone, etc. If I do that, probably get a pre-duraspark dist, and convert to Pertronix.

3. Buy a new Vacuum advance distributor from Mallory, Accel, MSD, Pertronix. Would be easiest, but not the cheapest.

Any other options?
Driver: 71 F100 Shortbed: Disc swap, 5.0 HO EFI & AOD
Project Vehicle/Mild Custom: 66 F100 CC longbed: Sold
User avatar
MattsIASlickShop
Posts: 222
Joined: July 2, 2006, 9:45 pm
Location: Central Iowa

Post by MattsIASlickShop »

get a duraspark II distributor from a 77 or so engine. be sure to get the square alumium "brain box" and the wiring from the distributor to that box, and the other part of the wiring that goes to the box and the ignition switch wire. Don't worry now that you won't be able to trace it all, it is very easy to find the wires and remove them from the donor car. If you can find it, try to get the brain box with the blue connections. it is an easy upgrade, much better than a stock distributor with points.
go here for more information:
http://groups.msn.com/slick60sfordfseri ... agram.msnw

or just get one of these bad boys:
http://www.performancedistributors.com/forddui.htm
Image
castruck_1964
Posts: 643
Joined: August 3, 2006, 3:45 pm
Location: Ramara Ontario
Canada

Post by castruck_1964 »

:iagree: dura spark II is the way to go.
My buddies 48 with 302 has it and it has never skipped a beat in all the years and miles he has put onit and will give you a better spark for your warmed up 351. :2cents:
Slicks rule
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6

Ken
User avatar
dotcentral
Posts: 1341
Joined: August 18, 2006, 5:13 pm
Location: Charlotte, NC

Post by dotcentral »

Well, the friend I got the W from found a dist for me. Not sure if its points or duraspark. At the least it saves me a core charge. Might be good as is, guess I'll know once I get it.

Thanks for the replies.
Driver: 71 F100 Shortbed: Disc swap, 5.0 HO EFI & AOD
Project Vehicle/Mild Custom: 66 F100 CC longbed: Sold
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

I have a crt HEI dizzy on my 460. for $130 ish and 1 wire hookup it was an easy 50,000 volts upgrade.

http://www.crtperformance.com/html/ford_gm_hei.html


:roll: I dont know if they have 351W though.
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

they dont show anything for the FEs.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Post Reply