Non-Slick Question
Non-Slick Question
I am looking at a early 60's Falcon to buy. I want to use a Classic car as advertising for my Real Estate. I want to use a Classic with my Signs on the side of it and use it for Showing Houses and to take to Cruise nite. My Question is this. I know some of the smaller 6 Cyl had the head and Exh, Manifold n are one piece. Are they all like that and is it possible to make changes so I can run Dual Exh if I find one with a 6...........Kid
65 f-100, Mostly Stock
64 F-100, 4in roof chop and on a car frame
64 F100, Project, not sure what to do with it
61 Long Uni project
79 F-250 Super Cab Long Box
74 Duster, Future Project
Dropped,Chopped,Tubbed,and Stubbed is the way to go
It is easier to ask Forgivness than to ask Permission
64 F-100, 4in roof chop and on a car frame
64 F100, Project, not sure what to do with it
61 Long Uni project
79 F-250 Super Cab Long Box
74 Duster, Future Project
Dropped,Chopped,Tubbed,and Stubbed is the way to go
It is easier to ask Forgivness than to ask Permission
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Kid,
I Know Falcons!
The 1st Falcon Platform runs from 1960 thru 1963-1/2only in Falcon and Comet lines, up 'til 1st sprints, Futura Convertibles & 2dr Sport Hard Tops came along.Then 64 Falcon came out.
64's are actually a Mustang Plaftorm thru 1968 Mustang/Cougar when It became the Maverick-Comet platform. Then in late 70s early 80s finally a Granada/ Monarch platform.
The reason I tell you this, 2nd Generation Falcon has 3" wide rear springs can take a 9" rear axle assy from a 57-64 Fairlane & Galaxie Pass car. It bolts in. Any engine up thru a 351W, and a 351 C or FE if you whack at spring towers. A Maverick Trans X member can be adapted with a little easy, fundamental fabbing. You can actually equip a 64 up Falcon with the Granada or Monarch running gear and 64 Falcon Body style. Power disc brakes, 3spd C-4 A/T, 302 or 240 or 250 cid engines, even 300 I-6 will all bolt in using script FoMoCo parts from later models on 64 & 65 Falcons, just as they do in 64-1/2 to 68 mustang & Cougars.
Even FEs, Remember 427 Powered, Falcon, AFX Cars?
Conversely 1960s (actually Aug '59) thru 63-1/2s have no bolt in upgrade options. They stand alone in FoMoCo's Line up. Everything is dedicated to Falcon/ Comet model,. That limited the vehicle. It was 1 of the 1st things Gene Iococoa changed when he replaced Robert McNamara as CEO of FoMoCo in 61 or 62.
I believe the Intake is what's integral w/ head. I think 144-170 & 200 CID I-6 engines all had intake cast as part of the head. The exhaust was the separate piece I believe. Seems I recall having to R&R Exhaust manifolds on them back in the day.
Also brakes & drums, Automatic & Manual Trans & Rear End assys suspension system drive & powertrain etc etc were 60-63-1/2 Falcon/ Comet. They used 2spd C-2 A/T or a really light weight 3 spd Column shifted Import built by Dagenhiem Werks in Germany, it was fragile! No Parts available anymore. . . . .
I used to be "Falcon One" in Lake City FL back in 70s & 80s. I would run steering column Mast Jackets from 61-5 F-250 or F-350 on the Falcon Steering Shaft assy on 64 up because it had no Col Shift and used the same T-Sig Switch etc as the Falcon & Comets. Then I would have a clean column when I installed a top loader or Floor shifted trans in the cars I built. . . . .
What I'm telling you is there is at least a World and a half of difference between the 1st generation (59 thru 63-1/2) & 64 thru 68 Falcon/Mustang 69-76 Maverick/ Meteor & 78 up Granada/Monarch into the 80s group. They are like slicks from 65 & up, everything through 79 is nearly a bolt on deal. 61-2-3-4 are stand alone sort of, at least mechanically. you can't put a 65 & later engine & drive train in a 61-4 with out buying an adaptor kit set up or making adaptors.
Probably not what you wanted to hear was it. Sorry say it, but it's all true.
FBp
I Know Falcons!
The 1st Falcon Platform runs from 1960 thru 1963-1/2only in Falcon and Comet lines, up 'til 1st sprints, Futura Convertibles & 2dr Sport Hard Tops came along.Then 64 Falcon came out.
64's are actually a Mustang Plaftorm thru 1968 Mustang/Cougar when It became the Maverick-Comet platform. Then in late 70s early 80s finally a Granada/ Monarch platform.
The reason I tell you this, 2nd Generation Falcon has 3" wide rear springs can take a 9" rear axle assy from a 57-64 Fairlane & Galaxie Pass car. It bolts in. Any engine up thru a 351W, and a 351 C or FE if you whack at spring towers. A Maverick Trans X member can be adapted with a little easy, fundamental fabbing. You can actually equip a 64 up Falcon with the Granada or Monarch running gear and 64 Falcon Body style. Power disc brakes, 3spd C-4 A/T, 302 or 240 or 250 cid engines, even 300 I-6 will all bolt in using script FoMoCo parts from later models on 64 & 65 Falcons, just as they do in 64-1/2 to 68 mustang & Cougars.
Even FEs, Remember 427 Powered, Falcon, AFX Cars?
Conversely 1960s (actually Aug '59) thru 63-1/2s have no bolt in upgrade options. They stand alone in FoMoCo's Line up. Everything is dedicated to Falcon/ Comet model,. That limited the vehicle. It was 1 of the 1st things Gene Iococoa changed when he replaced Robert McNamara as CEO of FoMoCo in 61 or 62.
I believe the Intake is what's integral w/ head. I think 144-170 & 200 CID I-6 engines all had intake cast as part of the head. The exhaust was the separate piece I believe. Seems I recall having to R&R Exhaust manifolds on them back in the day.
Also brakes & drums, Automatic & Manual Trans & Rear End assys suspension system drive & powertrain etc etc were 60-63-1/2 Falcon/ Comet. They used 2spd C-2 A/T or a really light weight 3 spd Column shifted Import built by Dagenhiem Werks in Germany, it was fragile! No Parts available anymore. . . . .
I used to be "Falcon One" in Lake City FL back in 70s & 80s. I would run steering column Mast Jackets from 61-5 F-250 or F-350 on the Falcon Steering Shaft assy on 64 up because it had no Col Shift and used the same T-Sig Switch etc as the Falcon & Comets. Then I would have a clean column when I installed a top loader or Floor shifted trans in the cars I built. . . . .
What I'm telling you is there is at least a World and a half of difference between the 1st generation (59 thru 63-1/2) & 64 thru 68 Falcon/Mustang 69-76 Maverick/ Meteor & 78 up Granada/Monarch into the 80s group. They are like slicks from 65 & up, everything through 79 is nearly a bolt on deal. 61-2-3-4 are stand alone sort of, at least mechanically. you can't put a 65 & later engine & drive train in a 61-4 with out buying an adaptor kit set up or making adaptors.
Probably not what you wanted to hear was it. Sorry say it, but it's all true.
FBp
Change is the Only Constant
- 66fordtrucknut
- Posts: 1289
- Joined: July 11, 2006, 11:48 pm
- Location: Eastern Shore - MD
Darrell, If its a 63 or older I have a set of frame mounts to put in a small block. They are factory stands that you put the motor mounts on. I used to have a 62 that I put a 302 in 4 speed and 9 inch. It was a fun and simple car. Sorry I ever sold that one.
On your ? the exhaust manifold is removable on the 170-200 sixes and thats a good thing----because they CONSTANTLY are cracking.
Let us know what year you are looking at. I have lots of Ford car friends, for parts ya know.
Tim
On your ? the exhaust manifold is removable on the 170-200 sixes and thats a good thing----because they CONSTANTLY are cracking.
Let us know what year you are looking at. I have lots of Ford car friends, for parts ya know.
Tim
INEPTOCRACY: (in-ep'-toc-ra-cy) : a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.
Thanks for the responses guys. The one I was looking at must have sold as it is gone from the web site I found it on. He has others I would consider but am still looking. I am not worried about doing any fabrication work if I want to swap engines and trans later but for now as most of you know I am partial to the sixes. I want it to have a Auto trans in case my Wife wants to drive it for some reason. I found a 65 Dart ( GASP) that I am checking into that is in pretty good shape and it has the six and auto. I have always liked the old Mopars ( my First car was a 66 Charger ) and since it does not have to be a Ford ( that will get me Chastized ), it just has to be in good shape and reliable to use as advertising and to drive to show Homes to Clients. If anyone has something or knows of something I might be interested in send me a E-Mail...........Kid
65 f-100, Mostly Stock
64 F-100, 4in roof chop and on a car frame
64 F100, Project, not sure what to do with it
61 Long Uni project
79 F-250 Super Cab Long Box
74 Duster, Future Project
Dropped,Chopped,Tubbed,and Stubbed is the way to go
It is easier to ask Forgivness than to ask Permission
64 F-100, 4in roof chop and on a car frame
64 F100, Project, not sure what to do with it
61 Long Uni project
79 F-250 Super Cab Long Box
74 Duster, Future Project
Dropped,Chopped,Tubbed,and Stubbed is the way to go
It is easier to ask Forgivness than to ask Permission
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

If you have a Ford Six then this is the place to check http://fordsix.com/forum/
There is a new aluminum head being made for the small sixes that has removable intake. Looks very promising.
They are a bunch of good guys just like here.
Have Fun!
Marty
BTY I am partial to sixes too.
There is a new aluminum head being made for the small sixes that has removable intake. Looks very promising.
They are a bunch of good guys just like here.
Have Fun!
Marty
BTY I am partial to sixes too.
65 F-100
94 F-150 (Daily Driver)
2006 Vibe (Wife's Car)
65 Karmen Ghia (Son's Car)
Iron Horse Bicycle, trying to save some gas money!
94 F-150 (Daily Driver)
2006 Vibe (Wife's Car)
65 Karmen Ghia (Son's Car)
Iron Horse Bicycle, trying to save some gas money!
-
Garbz
Kid, get a 64 Falcon wagon,would make a great vehicle for what you want to do with it. I had a Teal colored 63 1/2 Falcon Futura 260,4 spd.brand new,Did alot of Drag racing with it. I also had a 65 Comet Cyclone Gt 289, 271 H.P. 4 spd. Had a ball with both cars. Garbz find me a Falcon delivery,64-65. Merle
1966 F-100 "Grabber Blue" Pro St. [ 99 to 44/100% pure recycled FORD ]
