Looking at car trailer blues
Looking at car trailer blues
I've noticed if I'm looking for something I want to buy, it's as scarce as hens teeth, and if I want to sell it, thousands show up for sale. I've also noticed, I can buy a new trailer cheaper than some want for their used trailer. I would prefer to not buy a trailer, but sometimes I need one. I've been using a freind of mines for some time, and recently bent his fender, which I will now have to repair. I do contribute to the upkeep on the trailer. Recently bought two tires for it, and a winch, and have given him a set of big block blowfly heads at one time. I don't really want a new trailer, just a trailer for junking. I've been striping and hauling some of my stuff off. Scrap is bringing good money, and it's time to get rid of the junk I have. Besides, I can use the money, to pay for a trailer.
Anyway, what's everyones opinion on trailers? I've wondered about the torsion axles they make, and thinking will these hold up? I've also thought about building my own. Apparently, there are several states now that require brakes on both axles, and other laws concerning lights etc.. I've also thought about air ride options. Build the compresser onto the trailer. The trailer could be droped for loading, and raised for the road. Just a thought, might not have to dovetail the trailer that way. I've also thought about aluminum bolted to the frame instead of steel plate for the deck. Shouldsave some weight.
Rich
Anyway, what's everyones opinion on trailers? I've wondered about the torsion axles they make, and thinking will these hold up? I've also thought about building my own. Apparently, there are several states now that require brakes on both axles, and other laws concerning lights etc.. I've also thought about air ride options. Build the compresser onto the trailer. The trailer could be droped for loading, and raised for the road. Just a thought, might not have to dovetail the trailer that way. I've also thought about aluminum bolted to the frame instead of steel plate for the deck. Shouldsave some weight.
Rich
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

Here is our opinin on trailers , The best one we bought was a Texas Bragg Trailer out of Burlington NC But built in Texas for milage & use we still use it after 9 years being bounce from one of the country to the other,, Do not let this happen to you we bought a new 2 car trailer almost now 2 year ago and last trip in AZ. DOT pulled the emergency brake cable and no brakes, after 160 wrecker bill & 1137.00 repair bill found out that when 1 vehicle was put on the trailer the wiring going to the brakes was not heavy enough to hold the trailer even though we had trailer brakes still not enough on the emergency side & now we are fighting with the company on what they are going to do about ITS A Kaufman Trailer built in NC SO ask the sale person will the emegency brakes hold the trailer with a vehicle if not its not worth the steel it is built out of
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Rich. I have been in the same boat as you for quite a while. My Model T is not a vehicle you can take more than 30 miles or so, unless you have a few years to get there. My Uncle and my dad built a single axle trailer, specifically for the Model T, worked great for 20 years. My dad decided it would be a good idea to sell it, just before he passed the T down. Thanks, Dad.
I have looked at used car trailers, when I was seriously looking about 4-5 years ago,they started about $1500 around here, when a new trailer was about $2100. 1500 got you one with bald tires, worn out or not functioning brakes, a warped deck, and every lense smashed on the lights. And they are probably about a grand more by now.
4 of my buddies have trailers, have used every one of theirs at varying times, trying to spread the mooching load. One had a built in electric winch, which was great except the battery was dead the day we used it.
The nicest one I have seen was one someone (Vinnie?) had at SS01, I think, the whole deck tilted up for loading. Bet it was expensive. I would probably go get a new one insead of a used one, they don't come up for sale too often, this neck of the woods. The torsion bars are probably as reliable as springs, seen them used on travel trailers before. Liked the tilt up deck thing.
Waiting for a sack of money to fall from the sky for one.
JC
I have looked at used car trailers, when I was seriously looking about 4-5 years ago,they started about $1500 around here, when a new trailer was about $2100. 1500 got you one with bald tires, worn out or not functioning brakes, a warped deck, and every lense smashed on the lights. And they are probably about a grand more by now.
4 of my buddies have trailers, have used every one of theirs at varying times, trying to spread the mooching load. One had a built in electric winch, which was great except the battery was dead the day we used it.
The nicest one I have seen was one someone (Vinnie?) had at SS01, I think, the whole deck tilted up for loading. Bet it was expensive. I would probably go get a new one insead of a used one, they don't come up for sale too often, this neck of the woods. The torsion bars are probably as reliable as springs, seen them used on travel trailers before. Liked the tilt up deck thing.
Waiting for a sack of money to fall from the sky for one.
JC
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
I recently bought a 16', 7K# rated, tandem axle, flat bed, brand new w/out brakes painted black with
white pinstripes. Even the Deck is painted. I always do something more with lights myself anyhow and
brakes only cost $250 to buy+ I install them how I want them. This trailer has a 6" [ iron forming a tongue.
That runs from starboard front axle mount to port front axle mount point. A 2.5" x 5/16 angle iron structure
is welded to 6" [ channel Iron to form the frame for the bed X-Members.
This trailer suprised me because I got it for $1050 cash. I've been pricing-looking for a replacement trailer
ever since the FEMA People Stole mine. I couldn't come up with $2250-$2850 they want around here for a far
less trailer, not as substantial or as well built as this one I just bought at the 1st of the year. The one I have was built in MO.
Of course the one the FIX EVERYTHING MY ASS thieves stole was 10K# capacity 18' long Flat bed. They cost over $3K here now.
FBp
white pinstripes. Even the Deck is painted. I always do something more with lights myself anyhow and
brakes only cost $250 to buy+ I install them how I want them. This trailer has a 6" [ iron forming a tongue.
That runs from starboard front axle mount to port front axle mount point. A 2.5" x 5/16 angle iron structure
is welded to 6" [ channel Iron to form the frame for the bed X-Members.
This trailer suprised me because I got it for $1050 cash. I've been pricing-looking for a replacement trailer
ever since the FEMA People Stole mine. I couldn't come up with $2250-$2850 they want around here for a far
less trailer, not as substantial or as well built as this one I just bought at the 1st of the year. The one I have was built in MO.
Of course the one the FIX EVERYTHING MY ASS thieves stole was 10K# capacity 18' long Flat bed. They cost over $3K here now.
FBp
Change is the Only Constant
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

had to run so here I will finish also look at the GVWR'S OF the trailer also since some states over a ceratin combined GVWR'S Require you have to commercial tags also get to high and over the 26,001 lbs have to have CDL & the rest that goes with it, Anyawy look under the trailer and see how many channels go across to hold the deck plate underneath how many pound axles you have 3500, 5000, 6000, 7000, etc. so you don't burn the axles up.. My single car trailer like I said is a Texas Bragg but built tough , It was more money than some of these you see at the shows but after 9 years it still is being used , Before we bought that 2 car trailer we used it 7 trips a year coast to coast, Carlisle, Charlotte and other points in between,, Now as far as suspension both trailers have leaf springs in which all the miles I have to replace 1 set of springs,, Now I also have a Pace American that has Torsion Bars and its something you have to get used to,, I feels like I am pulling one of my old 48' reefers with air ride suspension,, acts more sensitive to the road at times I don't know if pace makes a open car trailer, then of course Feather Lite in which I think is overrated, Just reember looks does not always go when getting a trailer since you have to haul something on it that means you want it to be reliable and sturdy built especially when empty they do take a lot of abuse,, See what kind of warranty you get also not just on tire but on the craftsmanship so no welds are going to brake or stress cracks show up,,, Hope this is a little more info for you Tom
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
What's up with that?FORDBOYpete wrote:
Of course the one the FIX EVERYTHING MY ASS thieves stole was 10K# capacity 18' long Flat bed. They cost over $3K here now.
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
I would also like a trailer, however I don't have the space to store it either. Saw a nice one with a hydraulic tilt bed and a 8000# electric winch, which may be coming up for sale soon. The Torsion axels are good, I had them on a small trailer and my brother has had them on horse trailers for years, less bounce than the leaf system without shocks.
61 Mercury SWB Uni - Project
62 Mercury SWB BBW - Race truck
63 Ford SWB Uni - Daily driver (Jinx)
63 Ford SWB Uni - Parts truck
62 Mercury SWB BBW - Race truck
63 Ford SWB Uni - Daily driver (Jinx)
63 Ford SWB Uni - Parts truck
i know 20 footers are better but this don't look like too bad of a deal...
http://cgi.ebay.com/ebaymotors/NEW-16-U ... dZViewItem
and this one is allright too
http://cgi.ebay.com/ebaymotors/20-ft-Fl ... dZViewItem
http://cgi.ebay.com/ebaymotors/NEW-16-U ... dZViewItem
and this one is allright too
http://cgi.ebay.com/ebaymotors/20-ft-Fl ... dZViewItem

I miss my slicks
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

Anything with a 2" ball is not really that good... 2 15/16 ball and set will be a whole better remember that your pulling a trailer especially with something you care about so be safer and get the 2 15/16 of cousre that red trailer cut that 2 inch ball off and put a 2 15/16 on it if you buy it
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Nope Slick Fan,
They didn't reimburse me for anything, I had to eat it myself. That's why it took me 2-1/2 years to replace it.
But they did reimburse folks in Miami that never got a single hurricane during the 2004 season, and they
reimbursed them several millions of dollars for damage they didn't even have. . . .
FBp
Change is the Only Constant
A freind of mine built his own trailer, out of box tubing. Nice job and fairly light weight considering. He utilized torshion suspension, but he was building it for a fairly light race car. Built his own frame for the car to. I usually pull with a towbar when I haul something home, and usually don't want to drag a trailer with me when I go accross country. It can get a little harry with the towbar at times, if I'm running my shortbed 66, without disc brakes. However, I've generally saved some money not using a trailer. A towbar can travel with you and not take up much space. Mostly, I would use the trailer in the 2 or 3 hundred mile range. Just to move things from here to there. Of course, if I had one, I might use it more often on long trips.
Rich
Rich
- Truckfarmer
- Posts: 324
- Joined: April 3, 2006, 5:53 pm
- Location: Illinois
Rich, head across the state and start your search around Sikeston, Missouri. Lots of places there that build and sell trailers. Buddy of mine is a dealer for one of those manufacturers and can get me a 18' w/beaver tail for about $1250.
I saw a guy selling trailers with airbags at a show. Like you mentioned, let the air out so that you could load even the lowest Corvette then air it back up to travel. He said you raise it with a bicycle pump as it only need less than 20# of pressure.
I saw a guy selling trailers with airbags at a show. Like you mentioned, let the air out so that you could load even the lowest Corvette then air it back up to travel. He said you raise it with a bicycle pump as it only need less than 20# of pressure.
If you drove a Ford, you wouldn't need a good wrench!
I suspect that would be a wood floored trailer, Greg, butyou never know till you ask. However, it's the egg role that gets you. The egg roles add up quick. Little things like brakes lights tires and wheels etc., plus quality control. I'm leaning towards a Jay-Mar as being reccomended by a freind. I'm also watching a used 98 18 footer on Ebay in Kansas city. Only advantage to it would be the Ramsey winch on it. 1425 at present with steel floor but hasn't met reserve. If the price is much more than where it's at now, then there is no percentage in buying it, with having to travel 400 miles to get it.
Rich
Rich
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Hey, Roger That! on "Representation" Rich,
Blowing billions of dollars on hospitals, schools power plants and other facilities in the desert so Raghead
Insurgents have quality targets to destroy is sort of beyond my ability to understand too. Especially when our
injured troops who gave so much have to recover in rat & Insect infested mold holes within blocks of our own
Capital & Whitehouse.
Somehow I sort of think we ought to "secure the area" before we begin to rehabilitate it by using or wasting
valuable and precious assets like USA treasure and lives.
<---- US Govt !
After all, who has black gold in the ground we pay nearly $3.00 a Gal for . . . . .AGAIN ?

Hey it's time for me to sit down & shut up.
FBp

Blowing billions of dollars on hospitals, schools power plants and other facilities in the desert so Raghead
Insurgents have quality targets to destroy is sort of beyond my ability to understand too. Especially when our
injured troops who gave so much have to recover in rat & Insect infested mold holes within blocks of our own
Capital & Whitehouse.
Somehow I sort of think we ought to "secure the area" before we begin to rehabilitate it by using or wasting
valuable and precious assets like USA treasure and lives.
After all, who has black gold in the ground we pay nearly $3.00 a Gal for . . . . .AGAIN ?
Hey it's time for me to sit down & shut up.
FBp
Change is the Only Constant
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

