Starting 352 in cold weather

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
Sixfootfour
Posts: 56
Joined: August 1, 2009, 11:14 pm
Location: Edmonton, Alberta

Starting 352 in cold weather

Post by Sixfootfour »

Well, it was a fine day in Canada, today, only -6 degrees (Celsius), and I was waiting for the football game to start ( The Grey Cup ), and I thought I would try and start the 352 in the 1966 f-250.
I just rebuilt the 352 this summer and have never run it in the winter.
I wanted to add some antifreeze, and check the freezing point. Sure enough it was only good for -15, so I drained some out and added some more antifreeze.
To my surprise, the truck started easily and idled right away. The oil pressure was pretty high, about 80 PSI, because I used a high volume pump during the rebuild. The 4 bl Edelbrock carb , with electric choke was working properly, and no stalling.
I let it run for a while to open the thermostat, and charge the battery.
The old girl runs OK in the winter.
And now I'll watch the game, on TV, at home ( a lot of people are downtown watching it being played outside )
It was a fine day in Canada.
63 Uni
73 Mustang 351C
74 Dodge Charger
76 Granada 2dr
User avatar
Gary Seymour
Posts: 1192
Joined: September 15, 2006, 5:17 am
Location: Brown County, Indiana
United States of America

Post by Gary Seymour »

Brrrr. I'll bet the ol' truck appreciated the warm feeling!
User avatar
Anthony
Posts: 1422
Joined: July 12, 2010, 4:56 am
Location: Huntington, West Virginia
United States of America

Post by Anthony »

Can't wait to hear mine run..... congrats on the excellent rebuild!! enjoy the game... :thumright: :thumright:
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

We have come to think that with the EFI, engine management, etc. that all these new vehicles are better than the older stuff. Your modern stuff is efficient and easy - no letting warm up, no choke etc. Fire it up and drive.
The newer stuff has MUCH more to go wrong though too, a battery that will run your old truck just fine could be marginal at best for the demands of a newer car.
Everybody thinks only front wheel drive cars get around in the snow BULL___T, the only fwd cars when I learned to drive were unless you could afford and Eldorado or Toronado.
My old blue 64 lwb that everybody I knew used to make fun of, people would look at it with disgust, ex wife & kids didn't want to ride in it.
Mind you if it got really cold out and nothing else would start this is what we got around in. Nobody was laughing then!
New stuff isn't "better", we have just - forgotten.
Like so many other of the important things.....................
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
aarons428
Posts: 483
Joined: July 21, 2009, 9:18 pm
Location: norfolk NE
Germany

Post by aarons428 »

Boy u are lucky my 428 will NOT start anything below 40. Oh well i dont have a heater in it anyway.
2010 Ford Edge
99 Ford Expedition
65 Ford f-100 swb
460 stock other than a double roller timing chain and a s475 TURBO pushing 6psi of boost (now 12lbs)
351 W Pulled and on garage floor in storage
428 4v (R.I.P)
c-6 wide ratio modified
torino front stub
home made ladder bar rear with air bags
11.96 sec @ 110mph 1\4mile (best with the 428)
User avatar
62galxe
Posts: 1567
Joined: June 8, 2007, 4:38 pm
Location: Magnolia,Texas

Post by 62galxe »

mine was a little cold natured at 30 F but I have no choke at all.
1963 uni PATINA BLUE
1965 short bed
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

aarons428 wrote:Boy u are lucky my 428 will NOT start anything below 40. Oh well i dont have a heater in it anyway.
Yours isn't you average driver FE.
The average FE doesn't run 12s in the 1/4 in a truck either.
I think you again for that ride,
it's been a long time since I've been in something like that.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
Sixfootfour
Posts: 56
Joined: August 1, 2009, 11:14 pm
Location: Edmonton, Alberta

Post by Sixfootfour »

The choke and high idle are working, and it has a new heater core, as well as a block heater, but it was not plugged in today, with the mild weather.

Montreal won the football game against Saskatchewan, final score 21 to 18
Final temperature -9
63 Uni
73 Mustang 351C
74 Dodge Charger
76 Granada 2dr
User avatar
64shortie
Posts: 117
Joined: October 20, 2010, 12:01 pm
Location: No. Platte, Nebraska

Post by 64shortie »

My old, dependable, manually choked 292 has never failed to start. Last winter it wanted to stall after idling for about ten minutes. Figured out that was a vacuum leak. Fixed that and no problems since. Throw a little weight over the back axle and the thing goes through snow like a tank. The fancy, supercharged, high tech, front wheel drive Bonneville always started too, but, in snow anything over four inches it becomes kinda helpless. The Slick gets a lot of winter use.
Love those little square trucks
64 F100 short cust. cab
Custom built Harley FXSTC
2000 supercharged Bonneville
User avatar
Effie
Posts: 756
Joined: November 12, 2007, 10:14 pm
Location: Temple, GA

Post by Effie »

Greg D wrote:
New stuff isn't "better".............
No kidding. I told my Aunt I was selling my Fusion. She said she didn't mind, long as I got something new-ish and reliable. I just grinned, like, yeah, ok.

That ol ratty, noisy Bronco has never let me down in the 5 years I've been driving it. I don't drive the '66 as much, so I can't say, but its never let me down either and that FE busts off on the first click of the switch every time.

New. Pppsh, my ass. I'll keep my old trucks. I feel safer and happier in them.
~/\/\elissa~
Image '66 F100 -- Little Black
Image '78 Bronco -- Brutus

Image
User avatar
64shortie
Posts: 117
Joined: October 20, 2010, 12:01 pm
Location: No. Platte, Nebraska

Post by 64shortie »

Besides, they're a heck 'uv a lot cuter.
Love those little square trucks
64 F100 short cust. cab
Custom built Harley FXSTC
2000 supercharged Bonneville
slick4x4
Posts: 5725
Joined: April 19, 2008, 10:01 pm
Location: kipp kansas
United States of America

Post by slick4x4 »

the 223 in my truck starts in cold weather no problem
and talk about reliable....
the CHECK ENGINE light has never came on ..... :D
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
User avatar
charliemccraney
Posts: 1743
Joined: July 9, 2008, 10:02 pm
Location: Lawrenceville, GA

Post by charliemccraney »

I don't know about really new stuff, but '80s stuff is easy. If I have a problem with my car, 1988 Firebird, I plug in my laptop, take a look at all of the sensor readings, find the one that's not functioning or reading out of spec and go from there. In many ways, it's easier. It's really just a matter of having the right tools and in this case, the tools aren't expensive. Probably the only thing you will have to pay for is the interface cable. This day and age, almost everybody has a computer of some sort. If not, laptops that will do the job can be found real cheap. The software is free. The only really "complex" system on it is the engine management system. Everything else is treated as if it is a car from the 50s or 60s. Very simple. Some of the problems I have had with my truck make me wish I can just plug a computer to it to see what's going on.

The thing I hate about newer cars is the plastic. After 20 years or so, it seems that there is no way to remove plastic without breaking it.

With that, I will say newer stuff isn't worse, either.
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
Post Reply