Wheel covers for f250

kev152 · Post by **kev152** » January 10, 2011, 3:23 pm

Is there such a thing? I can't find them anywhere. Any ideas.
Thanks Kevin

ezernut9mm · Post by **ezernut9mm** » January 10, 2011, 6:20 pm

they made them. i'm not sure if the styles changed year after year though. i have one lonesome cap i was going to make a clock out of.

dmsmith6 · Post by **dmsmith6** » January 10, 2011, 8:56 pm

I have two "bottle cap" style stock hub caps that came off of a 1961 F250. They look just like the stock caps for an F100 only bigger. I bought them off of evilbay for my 1961 F100 and found this out the hard way!

factorystock · Post by **factorystock** » January 10, 2011, 9:00 pm

Hubcap for F 250 yes, wheel cover for F 250 no. Also, hubcaps were never offered by Ford to fit the F 350 single wheel.

ICEMAN6166 · Post by **ICEMAN6166** » January 10, 2011, 10:38 pm

factorystock wrote:Hubcap for F 250 yes, wheel cover for F 250 no. Also, hubcaps were never offered by Ford to fit the F 350 single wheel.

f250 inny cap, painted shown.comes in shiny version too.
[albumimg]1175[/albumimg]

67 f250 inny cap
[albumimg]734[/albumimg]

none by ford for these f350 wheels (international used the same wheels and had moon type caps)
[albumimg]579[/albumimg]

Bill W · Post by **Bill W** » January 10, 2011, 10:40 pm

i have 4 of them... they only fit the innie rims, too bad i can not use them! the original rims will not fit over the custom disc brakes i did.

slickmainer · Post by **slickmainer** » January 11, 2011, 10:38 am

i had 4 chrome ones and sold them for 120 on ebay

BigMike · Post by **BigMike** » January 11, 2011, 1:56 pm

What is an "innie" rim?

My F250 originally had split rims but now it has 16" wheels, hub caps, and trim rings.

kev152 · Post by **kev152** » January 11, 2011, 2:59 pm

Thanks guys I have 16" wheels on my 65 crew and I want a stock look. What caps would you suggest and where can a guy get them
Thanks Kevin

slickmainer · Post by **slickmainer** » January 11, 2011, 6:13 pm

61-65 are the innie style

Gritsngumbo · Post by **Gritsngumbo** » January 11, 2011, 6:51 pm

kev152 wrote:Thanks guys I have 16" wheels on my 65 crew and I want a stock look. What caps would you suggest and where can a guy get them
Thanks Kevin

If your 16" wheels are 5 lug, you can get stainless bottle cap caps (they're as stock as you can get) from Sacramento Ford or John's F100's. If they're 8 lug, they will require the larger caps and to the best of my knowledge no on repops them.

factorystock · Post by **factorystock** » January 11, 2011, 9:37 pm

BigMike wrote:What is an "innie" rim?
My F250 originally had split rims

The standard F 250 wheel was a 1 piece 16" wheel like this photo. Original F 250 hubcap will snap right on this rim. The 2 piece split rim was the heavy duty option.

[/

]

BigMike · Post by **BigMike** » January 11, 2011, 9:56 pm

These are the 16" "outie" wheels on my 8 lug F250. Not sure where the caps came from, looks like an LTD.

BarnieTrk · Post by **BarnieTrk** » January 11, 2011, 10:03 pm

BigMike,
Those beauty rings and hub caps look fantastic on there, Bub!

BarnieTrk

BigMike · Post by **BigMike** » January 11, 2011, 10:24 pm

BarnieTrk wrote:BigMike,
Those beauty rings and hub caps look fantastic on there, Bub!

BarnieTrk

Thanks, Jonas did a great job with this truck. I'm picking up where he left off.

ezernut9mm · Post by **ezernut9mm** » January 11, 2011, 11:08 pm

bigmike, those are factory 68-69 truck hubcaps.