'90 seat in a '65 cab

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
rctcomp
Posts: 27
Joined: June 4, 2008, 9:42 pm
Location: Grantsville, Ut

'90 seat in a '65 cab

Post by rctcomp »

Got a free seat from a 1990 super cab. so...
First I tried to use the brackets from the old seat but the slide release mechanism interfered with the bottom of the seat rail.
Plan B.
Image
Image
I cut a chunk out of the front part of the bracket. Pounded it flat and welded it back together.

Image
Hopefully you're a better welder than I am.

Image
The modified bracket lined up perfectly with the existing holes.

Image
Image
Not sure if I like it or not. The seat is kinda high, not much room between me and the steering wheel. I'll try it for awhile, worse case I'll get the old seat reupholstered and swap em again.
Jeff
User avatar
Hookedtrout
Posts: 797
Joined: February 9, 2011, 8:02 pm
Location: Southeast Idaho

Post by Hookedtrout »

Free is good, gives you those options to try and abandon if you don't like. Thanks for sharing, it may help those of us that come across the same seat.
Cory

1962 F100 SWB Unibody, 223
1931 Ford 5 window coupe
1968 GT/California Special Mustang, 289
Complete 61 LWB Unibody parts truck with 292 Y Block
User avatar
slickmainer
Posts: 2555
Joined: October 8, 2007, 6:41 pm
Location: Auburn Maine
Contact:
United States of America

Post by slickmainer »

i recall someone saying that the old seat tracks will swap on tho the new seat and bolt to the original floor holes with out modification. Some washers were needed but they didn't say where to put them.
--Gregg--
you can't get there from here
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

the trick here is to use the 61-64 seat brackets that have the adjustment lever at the front.
a discovery i made after i was done painting a set of side lever brackets and went to install them on the seat.

you will also have an issue with the seat back locking mechanism hitting the gas tank. easily removed. no need for a locking seat back, the original did not have it.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
William-in-St George
Posts: 579
Joined: December 31, 2009, 5:26 pm
Location: Saint George Utah

Seat

Post by William-in-St George »

Nice bit of engineering that cut/pound/weld. Sometimes the simplest answer is right in front of us.
William-in-St. George
Power by Ford
Posts: 192
Joined: August 22, 2008, 9:07 pm
Location: Atlanta Ga

Post by Power by Ford »

I did mine the exact same way and it works great. I also cut a piece of 14 ga to shape of the seat bracket and plated the outside to clean it up some.
Love those SLICKS
User avatar
slickmainer
Posts: 2555
Joined: October 8, 2007, 6:41 pm
Location: Auburn Maine
Contact:
United States of America

Post by slickmainer »

ICEMAN6166 wrote:the trick here is to use the 61-64 seat brackets that have the adjustment lever at the front.
i haven't even paid attention, but are the 65 and 66 on the side then?
--Gregg--
you can't get there from here
Post Reply