Why people buy new cars
- bobenhotep
- Posts: 911
- Joined: January 9, 2007, 4:15 am
- Location: Las Cruces, NM
- Contact:

stuff like that is why after the army dropped me in georgia from AZ i stayed in the south. the "people's republic of" states just aint fer me...
For every person with a spark of genius, there are a hundred with ignition trouble
My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Doc. We are almost all in the same boat. look at that truck in the What a Truck`` thread, currently at almost 19,000 dollars and has not met the reserve. These trucks don`t draw the bucks like old muscle cars, and often don`t sell for what it cost to get them that way. However, the reason I started down this path in the first place was, I went to a Ford dealership looking at trucks and found THIS out
45,000 for a fairly basic 2wd with just a few options. Leaves lots of room for restoration, no matter how you figure it. and no fake plastic interior, either.
45,000 for a fairly basic 2wd with just a few options. Leaves lots of room for restoration, no matter how you figure it. and no fake plastic interior, either.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
johny 45 k is not base price for a f 150 I bought my 05 F150 for 11,899 plus taxes and interest came out around 14,900. it was a godo truck but i needed a little more power for towing a work trailor, labor day weekend 2006 Ford credit put out a offer for anyone wanting a 06 ford could get approved with 0 interest regardless of credit, now i have a super crew 2006 xlt with a little bit higher payment and plenty of power.
anyways, doc, I understand where you are coming from, the salvage yards suck anymore, I had an argument with some fool on the phone once trying to tell me they can sell used parts at retail prices, I finally ended up telling him to sell them to someone else, we still have a couple good yards here as well ad great machine shops. I cant believe you couldnt find someone to rebuild yours, most the shops out here wont even touch a new modular block out here there is way to much precision work on them. I think i have a timing cover off my 223, i dont know if it fits the 240 or not as well as some other 223 parts if anything interchanges let me know
anyways, doc, I understand where you are coming from, the salvage yards suck anymore, I had an argument with some fool on the phone once trying to tell me they can sell used parts at retail prices, I finally ended up telling him to sell them to someone else, we still have a couple good yards here as well ad great machine shops. I cant believe you couldnt find someone to rebuild yours, most the shops out here wont even touch a new modular block out here there is way to much precision work on them. I think i have a timing cover off my 223, i dont know if it fits the 240 or not as well as some other 223 parts if anything interchanges let me know
-
ras4434
Doc, if you still need a timing cover let me know and I will pull one and send it to ya for the cost of shipping. I have 2 running 240's just sitting and cant seem to get rid of them. I want a 390 and all of the rigs I seem to come acrowss are I6. Cant complain really since there are still a bunch around here I'm just too cheep. Let me know, if you didnt live so far away I would just give you one. Dont suppose you are driving through Oregon soon..........
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

base model no optionsshawns fords wrote:johny 45 k is not base price for a f 150 I bought my 05 F150 for 11,899 plus taxes and interest came out around 14,900. it
21 G's
http://ford.ca/main/default.asp?section ... 70FOT111A0
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
No doubt they must be rippin the Canuks. I just bought a new company truck/daily driver, 07 FX2 Supercrew for 31500 on the X plan, and it is 0% interest for 5 years. Get a new one every 4 years or there abouts, perk of the job. Looks good hauling the Slick too!shawns fords wrote:yup thats what I had it was only 11k plus taxes et etc, they are ripping you canadians off I guess lol
actually it does have AC as well, mine didnt even have that
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Yes we certainly ARE getting hosed considering the Canadian dollar at $0.92 US!
No wonder my cousin's husband makes a good living importing used cars from the States!
Those prices sure don't make those new cars -and all their plastic- look much more attractive tho..
No wonder my cousin's husband makes a good living importing used cars from the States!
Those prices sure don't make those new cars -and all their plastic- look much more attractive tho..
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
I am really enjoying my 06 johnny, I never cared for plastic interior either, I spend alot of time in mine running all around the city from jobsite to jobsite, its very comfortable ride as well (something I never thought I would be proud to say about a ford trucks ride)
I think compared to the other new trucks out there, the only one I would consider otherwise would be a dodge only beacuse they have a better interior with a (work truck) type of interior there is tons of storage under the seats etc etc I wish mine had all of that, it would be perfect 
JC I am not a huge fan of all the plastic either but hey it is the way today. On the flip side I would hate to drive the miles I do in the old Slick, just not enough leg room for me. Plus I doubt my clients would want to bounce around in a 42 year old Ford Truck, they like to be comfy.
I gave a lot of thought to completely redoing a 67-78 short bed crew cab for my daily driver, and someday I may do just that, or find a nice restored one. I keep watching for a nice one.
I gave a lot of thought to completely redoing a 67-78 short bed crew cab for my daily driver, and someday I may do just that, or find a nice restored one. I keep watching for a nice one.
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Yeah, road tripping in my buddy's '01 is nice, they are super comfortable.
Just cannot justify the laying out of in excess of 45 large for a decent one.
I can see a company truck or something used for work, where you can write it off against the business, as being a justifiable expenditure, perhaps. I don't have those kind of options, So, it try and throw my dollars into something that will APPRECIATE in value rather than the opposite.
Just cannot justify the laying out of in excess of 45 large for a decent one.
I can see a company truck or something used for work, where you can write it off against the business, as being a justifiable expenditure, perhaps. I don't have those kind of options, So, it try and throw my dollars into something that will APPRECIATE in value rather than the opposite.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Doc, sorry to hear about your 240 blues. I just hauled of a 240 to the scrap yard. Why are you so set on a 240? 300 is as good or better, and looks about the same. Also, don't let the 428 block go with that car. If that car has a tractin lock rearend, be sure to pull that also. Not neccesarily the whole rearend, just the hog head, or third member. If I had that bird here, I could get 150 for scrap without the engine trans or rearend. Don't fall for that we'll haul it off for 50$ stuff.
Part of the reason junkyards don't make it anymore is because of the governments policies. Newer cars have to be inventoried and this costs money. Most junk yards are labor intensive, and keeping books and records of all the salable parts on these cars doubles the yard costs, along with being doubled again by EPA restrictions. This is all because the government has gotten totally out of control. The inventory things is so they can make more tax money, which they don't, because of the extra right offs they've caused. Just given some pencil pusher a job, and made it harder for working people to make it in a small business.
Rich
Part of the reason junkyards don't make it anymore is because of the governments policies. Newer cars have to be inventoried and this costs money. Most junk yards are labor intensive, and keeping books and records of all the salable parts on these cars doubles the yard costs, along with being doubled again by EPA restrictions. This is all because the government has gotten totally out of control. The inventory things is so they can make more tax money, which they don't, because of the extra right offs they've caused. Just given some pencil pusher a job, and made it harder for working people to make it in a small business.
Rich
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

Sorry to hear about the yards in Tucson as lot of people know we buy a lot of trucks in the southwest , we have not bought much of anything in Tucson since a lot of yards have gone out due to the local politics and rising costs like rain water run off in Tucson
I like to know which yard you dealt with since I know several in that area that would not deal with for many reasons especially the one at the end of the block on Illinois on the left off Commercial or going towards Mission guy has a lot old parts & cars stacked and reason is he thinks its gold well his gold is rotting away have not been in those places in many years Just by there attitudes I hear when talkng over the phone etc....
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
- ripsnorter
- Posts: 607
- Joined: November 12, 2006, 5:23 am
- Location: Washington State
Doc, like ras (and fairly near him) I've got a good core 240. Unlike his though mine doesnt run. theres some sort of knocking in it and it won't keep compression. Basically it needs a rebuild, but all the parts are there and in good shape. Thought it was a bad head gasket but turned out to be more then that.
I'm looking around for a 390 or some sort of big block, but if you're in a pinch I can get together with you on my 240. You'll have to PM me however as I havent been checking the forum too often lately.
I'm looking around for a 390 or some sort of big block, but if you're in a pinch I can get together with you on my 240. You'll have to PM me however as I havent been checking the forum too often lately.
-
didgeytrucker
- Posts: 142
- Joined: July 23, 2006, 4:07 pm
That would be a 406.Doc Pepper wrote:I have a modified 428. (a 428PI block with a 390 crank).......
Tracy
1956 F-100 Panel w/429 (3.50 9")
1966 F-100 SWB w/351C (3.25 9" - 3.70 posi for Saturday nights)
Music City F-100's,
1965 GT-350 S/C (2.78 1st & 3.70 TracLok 9")
Music City Mustang Club
1969 Schwinn StingRay
Don't focus on the destination....make the JOURNEY the adventure
1966 F-100 SWB w/351C (3.25 9" - 3.70 posi for Saturday nights)
Music City F-100's,
1965 GT-350 S/C (2.78 1st & 3.70 TracLok 9")
Music City Mustang Club
1969 Schwinn StingRay
Don't focus on the destination....make the JOURNEY the adventure
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

