OT - Long Shot for an Architect
- banjopicker66
- Posts: 1488
- Joined: July 17, 2006, 1:59 pm
- Location: Middlesboro, KY
OT - Long Shot for an Architect
This is probably a very long shot, but I'll try.
I am looking for an architect who knows how to draw in the application called FrameCAD, an application used for light gauge steel frame forming machines called Steel Frame Master. Check out the machine here:
http://www.steelframemaster.com/steelframemaster.htm
Here is why: I am trying to start a new business designing, manufacturing and selling small building kits out of preformed steel components. This machine is really cool. A computerized design is fed into the machine. Flat ribbon steel is fed into one end. Out come 2x4 and 2x6 framing pieces, all precut, pre-swaged and pre-punched for snap-together assembly. The joints are screwed together, and that is it. You do not even need a measuring tape.
My brother owns 2 of these Steel Frame Masters free and clear. He tried to start the same business, but lost all his (and the investors') money because they tried to focus on the luxury house market. The big cost in production is the architect, the big savings is in the building labor. If only one-off designs are used, the profit ends up in the architect's hands.
However, and this is my idea, to design a bunch of sheds, outbuildings and eventually garages (for now) that can be duplicated over and over. Pay the architect once, and profit many times.
I think there is a homeowner market out there that would be interested in buying steel frames to put on their own roof and siding. Eventually, I want to sell complete kits with siding and roofing, but I gotta get started first.
I need an architect who knows FrameCAD. It is similar to AutoCAD, but AutoCAD doesn't talk to the machine well, and it takes a lot of tweaking to get a design perfect in AutoCAD. Since I am financing this myself, with only a little bit of money, I can't afford mistakes right now. I would rather pay an architect fair value to get a design or two through the complete design, production and build process, and then start selling it.
Anyone?
Many thanks!
I am looking for an architect who knows how to draw in the application called FrameCAD, an application used for light gauge steel frame forming machines called Steel Frame Master. Check out the machine here:
http://www.steelframemaster.com/steelframemaster.htm
Here is why: I am trying to start a new business designing, manufacturing and selling small building kits out of preformed steel components. This machine is really cool. A computerized design is fed into the machine. Flat ribbon steel is fed into one end. Out come 2x4 and 2x6 framing pieces, all precut, pre-swaged and pre-punched for snap-together assembly. The joints are screwed together, and that is it. You do not even need a measuring tape.
My brother owns 2 of these Steel Frame Masters free and clear. He tried to start the same business, but lost all his (and the investors') money because they tried to focus on the luxury house market. The big cost in production is the architect, the big savings is in the building labor. If only one-off designs are used, the profit ends up in the architect's hands.
However, and this is my idea, to design a bunch of sheds, outbuildings and eventually garages (for now) that can be duplicated over and over. Pay the architect once, and profit many times.
I think there is a homeowner market out there that would be interested in buying steel frames to put on their own roof and siding. Eventually, I want to sell complete kits with siding and roofing, but I gotta get started first.
I need an architect who knows FrameCAD. It is similar to AutoCAD, but AutoCAD doesn't talk to the machine well, and it takes a lot of tweaking to get a design perfect in AutoCAD. Since I am financing this myself, with only a little bit of money, I can't afford mistakes right now. I would rather pay an architect fair value to get a design or two through the complete design, production and build process, and then start selling it.
Anyone?
Many thanks!
- DV65CustomCab
- Posts: 1497
- Joined: July 18, 2006, 4:23 pm
- Location: Elizabethtown, PA

My brother-in-law is an architect. I asked him about this, and here is his reply:
"I wouldn't hire an architect.
I would hire a contractor and a software geek that knows the system. The contractor can tell him the most efficient layout for the building and have the software geek input the information. I don't know many architects that would be familiar with a machine as he describes. Architect never like doing the same thing twice."
"I wouldn't hire an architect.
I would hire a contractor and a software geek that knows the system. The contractor can tell him the most efficient layout for the building and have the software geek input the information. I don't know many architects that would be familiar with a machine as he describes. Architect never like doing the same thing twice."
Stop The Longbed Hate! 
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
Check to see if you can find someone that works in a factory that makes these prefab storage sheds that are round. I saw a show where they made those and they made them the same way. I agree with the preveous post on finding someone that is a geek and a contractor. If you have someone in your area that works in a metal stamping factory. Many have machines that are programed and a worker like that may want to make a few bucks on the side. And they could work well with the contractors since they are use to taking info and making parts.
- banjopicker66
- Posts: 1488
- Joined: July 17, 2006, 1:59 pm
- Location: Middlesboro, KY
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

John. I am not an Architect, but an Architectural Technologist. I have been drawing houses on Autocad since 1987. In the mid '90s, one company I worked for in Calgary even experimented with the rolled steel structures you want to use. We had Engineers involved and built our own trusses. Then, we'd have killed for a system like that.
Your idea is good, repro those unchanged and repetetive things (like garages, sheds etc) but to find someone specifically aware of that software is gonna be tough. I don't know a single person who does, although I can think of one specific rolled steel manufacturer in Calgary, Alberta, named CanAm that might use it.
Best o' luck on that one, Banjo. My suggestion would be to put an ad in a specific trade publication, for rolled steel formers. An Architect is definitely NOT what you are looking for. They are a bunch of artsy fartsy goofs, who barely can find their butt using both hands when it comes to building structure.. You are looking more specifically for someone in the engineering trades, and the technicians that actually do the work, not the high-falutin' Engineers. Perhaps a CNC operator.
My own motivation to do work on the side is definitely lacking. The last project I took on, a renovation for some friends that should have been a weekend's work, took me 6 months. I just could not get motivated to do it. It's kinda like the carpenter who lives in an unfinished house for years or the Mechanic who's car barely runs... what you've done for a living for 29 years is NOT what you do for fun on the weekend. My point? I am not your man.
One more thing. Local building codes normally do not cover the use of structural, cold-rolled steel. If you were to build that here, or anywhere I have worked, you'd have to have an Engineer's stamp to prove the building was structurally sound. In the case of repeat buildings like that, you could have an engineer review each one of the designs, and stamp it, for re-use over and over. But engineers are usually specific to State, or region. So, for each jurisdiction in which you are buliding these things, you might need a local engineer. Maybe things like that are different in the States, or your area, but I'd look in to it for sure. You could spend a pile on engineering reviews.
Your idea is good, repro those unchanged and repetetive things (like garages, sheds etc) but to find someone specifically aware of that software is gonna be tough. I don't know a single person who does, although I can think of one specific rolled steel manufacturer in Calgary, Alberta, named CanAm that might use it.
Best o' luck on that one, Banjo. My suggestion would be to put an ad in a specific trade publication, for rolled steel formers. An Architect is definitely NOT what you are looking for. They are a bunch of artsy fartsy goofs, who barely can find their butt using both hands when it comes to building structure.. You are looking more specifically for someone in the engineering trades, and the technicians that actually do the work, not the high-falutin' Engineers. Perhaps a CNC operator.
My own motivation to do work on the side is definitely lacking. The last project I took on, a renovation for some friends that should have been a weekend's work, took me 6 months. I just could not get motivated to do it. It's kinda like the carpenter who lives in an unfinished house for years or the Mechanic who's car barely runs... what you've done for a living for 29 years is NOT what you do for fun on the weekend. My point? I am not your man.
One more thing. Local building codes normally do not cover the use of structural, cold-rolled steel. If you were to build that here, or anywhere I have worked, you'd have to have an Engineer's stamp to prove the building was structurally sound. In the case of repeat buildings like that, you could have an engineer review each one of the designs, and stamp it, for re-use over and over. But engineers are usually specific to State, or region. So, for each jurisdiction in which you are buliding these things, you might need a local engineer. Maybe things like that are different in the States, or your area, but I'd look in to it for sure. You could spend a pile on engineering reviews.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Hey!! I'm an Engineer!Johnny Canuck wrote:...You are looking more specifically for someone in the engineering trades, and the technicians that actually do the work, not the high-falutin' Engineers
JC is right, though. You do not want an engineer, we cost too much, you want a CAD driver. I hapen to be Both, but I don't know that system, I only cork on CATIA V5 (a lot mor complicated)
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

I'll be danged Max!MadMaxetc wrote:Hey!! I'm an Engineer!![]()
What kind of train do you drive?
My Father, father-in-law, two sister's in law and a brother in law are all Engineers.
That statement always brings them off their pompous high horse, and down to size
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
I'm an engineer and a CAD driver as well, but I mainly use SolidWorks, and a bit of AutoCAD. You may need an engineer to analyze the structure for wind and snow loads, etc., but I agree you'd be better off with a technologist. You should be able to form a basic idea of your desired layout, reference similar existing structures, then apply those dimensions to the software, rather than spending big bucks to reinvent the wheel.
I don't own a pompous high horse.
I don't own a pompous high horse.
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

