removing/repairing front cab mounts

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
Shenanigans
Posts: 6
Joined: November 19, 2011, 7:58 pm
Location: Paradise, CA

removing/repairing front cab mounts

Post by Shenanigans »

Ok so Hi everyone :hello: I just wanted to introduce myself on here, truck talk, as well as on projects and builds. My name is Matt I'm 22 and working on a 61 flareside. Here is the link for my build where I will post most of my pics. http://fordtruk.com/forums/viewtopic.php?t=24281 So to bring everyone up to speed`, at the moment I am working on the cancer I found on the driver side front body mount. I'm attempting to drill out the tack welds to get under it but it is not going as smoothly as I hoped here are some pics.
Image
Image
Image

If any one has any advise it would be greatly appreciated or if there is any questions don't hesitate to ask; cant wait to get to know you guys
Rebuilding Flaresides one STEP at a time.
1961 Flareside 223
viewtopic.php?f=32&t=24281
Bill W
Posts: 1166
Joined: December 26, 2007, 1:32 pm
Location: Tucson AZ.

Post by Bill W »

drill bits are okay, but you should get a spot weld cutter for that job.
jamesdfo
Posts: 1637
Joined: February 15, 2011, 10:32 am
Location: Edmonton, Alberta
Canada

Post by jamesdfo »

Matt: This might be one instance where it would be easier to drill them all the way through....then, you can plug weld the new mount on from the top....and as an added bonus, you won't have to be laying underneath the truck to weld, or grind the welds. If done properly, a quick touchup with a disc to knock the top off your rosettes after welding should be all that's needed. (I'm assuming you have mostly gutted the interior?)

James
oldtrucks
Posts: 1015
Joined: November 28, 2007, 1:59 am
Location: Pinehurst Idaho
United States of America

Post by oldtrucks »

Shenanigans

Looks like you are on the right track the suggestion to drill all the way through is good for the floorboard area but not for the area on the side. I have cut away everything but the flanges where the spot welds are. Makes it a lot easier to locate the spot welds and get them removed.

And welcome from the wilds of Northern Idaho.
Mike Kincheloe
Mikes Old Trucks
I restore old trucks and cars


1962 UNI Short Box, Stock Y block, 4 speed Image
1972 F 250 4X4 429 4 speed Dana 70 rear
1977 F 350 Camper Special, Ranger, Super Cab
1950 F7 Cab and Chassis
1976 F150 4 Speed 4 X 4
1996 Taurus
User avatar
unibody madness
Posts: 2147
Joined: December 4, 2008, 4:33 pm
Location: Paradise,CALIFORNIA 95969
United States of America

Post by unibody madness »

Matt,
Glad you finally decided to join. I told you these guys would be a great help.
The suggestion to drill all the way through is exactly right. I had not thought about the new mount not being drilled, so that ends my worry about filling a through hole. then cutting away ththe rest except the side flanges answers your concerns about that.
Guess I am not the only Houdini....
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944

It does not matter what you think, it only matters what you do about it!
jamesdfo
Posts: 1637
Joined: February 15, 2011, 10:32 am
Location: Edmonton, Alberta
Canada

Post by jamesdfo »

Damn Mike, you are TOTALLY correct on that....I was looking at this near midnight last night, and with the pic size, on my monitor I couldn't even see the outside end that goes to the back of the sills

James
oldtrucks wrote:Shenanigans

Looks like you are on the right track the suggestion to drill all the way through is good for the floorboard area but not for the area on the side. I have cut away everything but the flanges where the spot welds are. Makes it a lot easier to locate the spot welds and get them removed.

And welcome from the wilds of Northern Idaho.
oldtrucks
Posts: 1015
Joined: November 28, 2007, 1:59 am
Location: Pinehurst Idaho
United States of America

Post by oldtrucks »

jamesdfo

Well I have to admit I've been down this road a few times. I do things most of the time without having to think about how to do it because I've done it so many times so when this post came up, thanks to Shenanigans, it got me to thinking that I am headed into this exact process on Rob's 63 UNI.

I will begin to document the process of installing the cab mounts pretty soon. They are already removed so I will only be able to show the install.
Mike Kincheloe
Mikes Old Trucks
I restore old trucks and cars


1962 UNI Short Box, Stock Y block, 4 speed Image
1972 F 250 4X4 429 4 speed Dana 70 rear
1977 F 350 Camper Special, Ranger, Super Cab
1950 F7 Cab and Chassis
1976 F150 4 Speed 4 X 4
1996 Taurus
William-in-St George
Posts: 579
Joined: December 31, 2009, 5:26 pm
Location: Saint George Utah

Looks good

Post by William-in-St George »

Looks like a real rust free truck. Lots of undercoat. I'd get a spot weld cutter from eastwood and continue as planned.
William-in-St. George
rickairmedic
Posts: 1394
Joined: July 19, 2006, 9:27 pm
Location: Louisville,Ky

Post by rickairmedic »

I agree with drilling through on the floor side on the sides though a spot weld bit would work well and Harbor freight actually sells them I have picked up a few at my local store . I would bet its the same basic cutter Eastwood sells but at a third the price .


Rick
if it aint broke fix it till it is :D
Post Reply