Doc
TBI is a spray constant type. It uses the TPS and polls the O2 sensor to vary the ammount of fuel sprayed at the throttle plates.
Yep 28 past and still no sleep to the north either.
Garbz
A poor man's injector system ??
- bobenhotep
- Posts: 911
- Joined: January 9, 2007, 4:15 am
- Location: Las Cruces, NM
- Contact:

i had seriously thought about installing GM tbi on my 223, and just tricking the tbi into thinking the 223 was a small v6. have most of it figured out, just need a donor...
For every person with a spark of genius, there are a hundred with ignition trouble
My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Doc,
Timing the right amount of fuel in the squirt then getting it to the right cylinder in time to do some good is the Flaw, but I'm glad to see you're figuring & studying on EFIt any way.
Central Fuel Injection, (CFI) aka TBI was a huge experiment US Auto Mfgrs got Public to Pay for while they tweaked their designs & systems on us. It took roughly 10 years for them to dial in Tuned Port Injection (TPI), but once they got it figured out everybody went to it. Why d'you s'pose that is?
As Garbz so correctly points out, TBI/ CFI uses a spraying application cyls suck it into themselves then combust. Thus TBI is an atomizing unit just like a carburetor is. After it atomizes fuel & mixes it with Air, it still has to get it delivered to the combustion chambers. FWIW, getting air+fuel mix to flow to combustion chambers around twisty bends & turns is 1/2 the problem with Carburetors and TBI (aka CFI) alike.
TPI or Port Injection atomizes in intake valve plenum as intake valve opens. Air+Fuel combo flow is no longer a problem. All intake delivers is raw air, not a balanced air flow, fuel dense column, at a correct velocity. Which do y'all suppose is the better and easier thing to deliver through a twisty, cavernous structure such as an Intake manifold, Mix or plain Air?
Besides the delivery problems with TBI & CFI injection the ability of a TPI system to "adjust" it's performance through the rev range with full regard for demand and performance needs at the same time, puts TPI over the top. You are right about complex operation system requirements. But with care and management the net end result is why people get huge MPG from big cube engines and BIG power from small cube engines. . . .
They do have to keep after and stay up on maintenance and upkeep, and do have to check the system if the check Engine Light or CEL comes on. But all in all the vast majority if the latter day Mass Air Flow Sensed, Tuned Port, Electronic Fuel Injection system deliver millions of trouble free miles in millions of vehicles daily.
It's kinda like getting my Dad to give up his Hand Cranked, push button, mechanical, adding machine for an electronic calculator. Once he learned to use the calculator it became
OH WOW
look at me guys.
FBp
Timing the right amount of fuel in the squirt then getting it to the right cylinder in time to do some good is the Flaw, but I'm glad to see you're figuring & studying on EFIt any way.
Central Fuel Injection, (CFI) aka TBI was a huge experiment US Auto Mfgrs got Public to Pay for while they tweaked their designs & systems on us. It took roughly 10 years for them to dial in Tuned Port Injection (TPI), but once they got it figured out everybody went to it. Why d'you s'pose that is?
As Garbz so correctly points out, TBI/ CFI uses a spraying application cyls suck it into themselves then combust. Thus TBI is an atomizing unit just like a carburetor is. After it atomizes fuel & mixes it with Air, it still has to get it delivered to the combustion chambers. FWIW, getting air+fuel mix to flow to combustion chambers around twisty bends & turns is 1/2 the problem with Carburetors and TBI (aka CFI) alike.
TPI or Port Injection atomizes in intake valve plenum as intake valve opens. Air+Fuel combo flow is no longer a problem. All intake delivers is raw air, not a balanced air flow, fuel dense column, at a correct velocity. Which do y'all suppose is the better and easier thing to deliver through a twisty, cavernous structure such as an Intake manifold, Mix or plain Air?
Besides the delivery problems with TBI & CFI injection the ability of a TPI system to "adjust" it's performance through the rev range with full regard for demand and performance needs at the same time, puts TPI over the top. You are right about complex operation system requirements. But with care and management the net end result is why people get huge MPG from big cube engines and BIG power from small cube engines. . . .
They do have to keep after and stay up on maintenance and upkeep, and do have to check the system if the check Engine Light or CEL comes on. But all in all the vast majority if the latter day Mass Air Flow Sensed, Tuned Port, Electronic Fuel Injection system deliver millions of trouble free miles in millions of vehicles daily.
It's kinda like getting my Dad to give up his Hand Cranked, push button, mechanical, adding machine for an electronic calculator. Once he learned to use the calculator it became
FBp
Change is the Only Constant
