Ford part number question

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Ford part number question

Post by The Big M »

Anyone know what the part number prefix EAA corresponds to (i.e. engine size, vehicle, year)? The number I'm specifically interested in is EAA-6507-C.
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

Okay, after some quick research I've discovered that EAA corresponds to the 215 inline six.

So my next question is whether the intake valves from a 215 are interchangeable with those from a 223. Does anyone know offhand? Thanks.
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Post by 64 f100 »

Numbers in my book for exhaust are c3az 6507 a,b,c,and d. standard, .003 oversize, .015 oversize, and .030 oversize stems. Heads are 1.52 diameter, length is 5.02, and standard stem diameter is .3402.
Intake Head diamter is 1.79, and 5.02 length, standard stem diameter is .3420, part number coaz 6507 j,l,k, and m. J being standard, and the others being oversize as listed for the exhaust respectively. Hope this helps,

Rich
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

Thanks for the confirmation. I found similar numbers. I also figured out that the intakes for the 215 are 1.65 head diameter, smaller than the 223 and therefore not interchangeable. Too bad, could have got a smokin' deal... :(
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Never heard of a 215 Ford. Then again I never claimed to be an inliner fan.
Learn something new every day I guess.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

Big m- Have you ever checked out the ford six performance website? Their vintage section covers the 215,223 and 262 6's, I have a 223 in my uni and great source of info on these engines.
Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

I have. I even registered at some point but I seem to have forgotten my username/password...

Oh well, I was able to find some info in the Dennis Carpenter catalogue.
Post Reply