Just An Introduction... And A Few Pics Of RUBY
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Thanks for the welcome, Danny. I've pared down a bit (had 7 at one time).
I am planning on turning the little white monster into a more manageable daily driver within the next year (at least as "nice", finish-wise, as RUBY). For her, I have another T-bird interior, a true "Shaker" scoop/breather from a '70 Ranchero GT, and a hydro-dip "WOODIE" treatment for the side moldings.
Everything from the radiator cap through the rear pumpkin on that truck is BRAND NEW, including the dropped I-beams/rear shackles, Bilstein coil-overs, poly bushings, front and rear swaybars, etc. I love driving her just the way she sits. But with 4:56 D/L gears, and the Fairbanks race-prepped C6... an occasional run to the store, or down old Hwy 1 is about all the gas mileage will tolerate, LOL!
I am planning on turning the little white monster into a more manageable daily driver within the next year (at least as "nice", finish-wise, as RUBY). For her, I have another T-bird interior, a true "Shaker" scoop/breather from a '70 Ranchero GT, and a hydro-dip "WOODIE" treatment for the side moldings.
Everything from the radiator cap through the rear pumpkin on that truck is BRAND NEW, including the dropped I-beams/rear shackles, Bilstein coil-overs, poly bushings, front and rear swaybars, etc. I love driving her just the way she sits. But with 4:56 D/L gears, and the Fairbanks race-prepped C6... an occasional run to the store, or down old Hwy 1 is about all the gas mileage will tolerate, LOL!
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

Re: Just An Introduction... And A Few Pics Of RUBY
you have some very nice trucks.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Mornin' Iceman,
I've nodded and smiled at yours as well, over the years. Were'nt/aren't you one of the "parts and extra trucks gurus" of the site?
I've nodded and smiled at yours as well, over the years. Were'nt/aren't you one of the "parts and extra trucks gurus" of the site?
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

Re: Just An Introduction... And A Few Pics Of RUBY
yes at one time i had close to 20 trucks and loads of parts.CM Sackett wrote:Mornin' Iceman,
I've nodded and smiled at yours as well, over the years. Were'nt/aren't you one of the "parts and extra trucks gurus" of the site?
moved to the 4 corners area from Alaska last fall and now im down to my original truck again.
getting settled in and exploring the area,hopefully i can begin hoarding again.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Ahh yes... been there. Still doin' that, lol!hopefully i can begin hoarding again.
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Kevin,kstones63 wrote:from Phoenix. You have a great looking truck.
Kevin
Just noticed your "home". Lived in Mesa, many MANY years ago. Dad was the bodyshop manager for BERGE Ford, Mesa. He and Mom were good friends with the Berges, and Mr. MATA (of "Mata's Mexican Grille").
...Ol' Yeller was special ordered by Mom from BERGE. It was optioned out by Mr. Berge (per Mom's desires and requests) far beyond the norm for a truck.
1. Spray vinyl top (all the rage, in '66)
2. Spotlight
3. T/C radio... WITH foot switch reverb
4. dealer installed A/C (while keeping all the heat/defrost equip)
5. Dealer installed P/B
6. Dealer installed P/S
7. Dealer installed "Squire" polo ponies (badging from the front fender of a Country Squire wagon... '65/66) on roof pillars.
She traded, straight across, a burgundy '62 T-bird roadster w/red deluxe interior.
Honestly, I would have preferred the bird.
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
- greenindian
- Posts: 130
- Joined: June 30, 2007, 1:44 pm
- Location: Gettysburg, PA
Re: Just An Introduction... And A Few Pics Of RUBY
Welcome from Gettysburg!, beautiful '66 you've got there!
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Thanks for the welcome... that INDIAN is gorgeous!
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
-
Hunter's 64
- Posts: 932
- Joined: January 10, 2011, 4:58 pm
- Location: High Springs Florida

Re: Just An Introduction... And A Few Pics Of RUBY
Just looked thru you website, wow what an incredible writer, Sorry but I have to share a little
http://doorwaybuck.com/theblog/
http://doorwaybuck.com/
Danny
http://doorwaybuck.com/theblog/
http://doorwaybuck.com/
Danny
-
1966Jacked4x4
- Posts: 5
- Joined: May 31, 2013, 12:45 am
Re: Just An Introduction... And A Few Pics Of RUBY
I swear I am having a moment of Deja Vu... I believe that truck was on "Hot Rod TV" show. Corky Coker(The tire guy) was traveling around the south looking for a truck to buy and he stopped at an old mans house and was looking at that truck. It might not be the same red slick but I can't image there are that many red slicks with frenched antennas running around the US. I checked the DVR and of course I deleted it. And couldn't find that episode on the internet anywhere either.
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Hmmm,
RUBY spent nearly all her days in S.C. Colorado (bought new, loved, and 14 years ago... lovingly and phenomenally frame-off'd by a man that owned a body shop... just like my dad). The story I got was that he then gave it to his son, who moved to Tuscon, AZ and sold it to another fella... who completely updated the running gear (from the radiator cap through the rear end).
For whatever crazy reason, he sold her last June to a man in IL. He put it up for sale within 5 months (had NO IDEA what he had... NONE), and I gladly grabbed onto her.
I have all receipts for the running gear, A/C, Complete suspension, Brake, Alarm, P/D/L, etc. work. It covered 3 years... and 3,000 miles (they reset the odometer when the factory-fresh 429CJ, Fairbanks race-prepped C-6, 3:90 D/L, 3-core radiator, twin electric fan system, etc., etc. went in). They even put brand new tires on her, 50 miles before the last man had her shipped to IL.
He put 206 miles on her, in 5 months (did I mention he had absolutely NO CLUE what he had? NONE).
To date (since December 17) I have logged 10,180+ beautiful, tight, new, fast miles with her. This morning, I'm driving her over to a friend's shop to install a rear sway bar I've had for 6 years (for another truck that I sold before it was installed), and a more highway-friendly 3:25 T/L rear end.
NOTE: The GearVendor O/D has done exactly what they said it would... reduced top-end rpms by right at 28%. But with as much highway running as she does, this gear will be a better fit...
...until I get a Richmond 6-sp.
NOTE2: If the truck he looked at had WESTERN mags, THAT would have been RUBY (haven't seen too many sets of these old beauties, on anything, since the early 80s... and these were put on the truck right after they hit the market).
RUBY spent nearly all her days in S.C. Colorado (bought new, loved, and 14 years ago... lovingly and phenomenally frame-off'd by a man that owned a body shop... just like my dad). The story I got was that he then gave it to his son, who moved to Tuscon, AZ and sold it to another fella... who completely updated the running gear (from the radiator cap through the rear end).
For whatever crazy reason, he sold her last June to a man in IL. He put it up for sale within 5 months (had NO IDEA what he had... NONE), and I gladly grabbed onto her.
I have all receipts for the running gear, A/C, Complete suspension, Brake, Alarm, P/D/L, etc. work. It covered 3 years... and 3,000 miles (they reset the odometer when the factory-fresh 429CJ, Fairbanks race-prepped C-6, 3:90 D/L, 3-core radiator, twin electric fan system, etc., etc. went in). They even put brand new tires on her, 50 miles before the last man had her shipped to IL.
He put 206 miles on her, in 5 months (did I mention he had absolutely NO CLUE what he had? NONE).
To date (since December 17) I have logged 10,180+ beautiful, tight, new, fast miles with her. This morning, I'm driving her over to a friend's shop to install a rear sway bar I've had for 6 years (for another truck that I sold before it was installed), and a more highway-friendly 3:25 T/L rear end.
NOTE: The GearVendor O/D has done exactly what they said it would... reduced top-end rpms by right at 28%. But with as much highway running as she does, this gear will be a better fit...
...until I get a Richmond 6-sp.
NOTE2: If the truck he looked at had WESTERN mags, THAT would have been RUBY (haven't seen too many sets of these old beauties, on anything, since the early 80s... and these were put on the truck right after they hit the market).
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
- stronger66ratfink
- Posts: 1131
- Joined: March 1, 2007, 4:02 pm
- Location: Friendswood, Texas
Re: Just An Introduction... And A Few Pics Of RUBY
Good stuff CM,
Glad you got the interior working.
the other owners must of spent all the time on exterior and engine
I don't suppose you have any spare parts lying around!
just kidding, I know you must after doing or having so many.
I only did one and parts are still taking up needed shelving!
Second one is in the car port!
welcome from South East Baja Houston
Glad you got the interior working.
the other owners must of spent all the time on exterior and engine
I don't suppose you have any spare parts lying around!
just kidding, I know you must after doing or having so many.
I only did one and parts are still taking up needed shelving!
Second one is in the car port!
welcome from South East Baja Houston
Miss Daisy 1966 F100 short bed custom cab 2004-2014
78' F250 XLT Ranger
13' CVO Road King
78' F250 XLT Ranger
13' CVO Road King
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Mornin' Sir,
Well, right handy (a lot of stuff in storage, back at the old home place), I have a perfect big back glass and good trim for a Uni, and a brand new, perfect tailgate in primer for same. I also have a true Shaker scoop and breather setup from a '70 Ranchero GT that I am still thinking of making a part of the little white truck.
I understand that whole "wheretheheck did THESE COME FROM???" syndrome.
Well, right handy (a lot of stuff in storage, back at the old home place), I have a perfect big back glass and good trim for a Uni, and a brand new, perfect tailgate in primer for same. I also have a true Shaker scoop and breather setup from a '70 Ranchero GT that I am still thinking of making a part of the little white truck.
I understand that whole "wheretheheck did THESE COME FROM???" syndrome.
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
Re: Just An Introduction... And A Few Pics Of RUBY
Hey, another Slick Fan from Arkansas. I have a red '66 that I've had since '86. Wasn't in the family for its first 20 years, but will be forever (or until I die and the kids decide to sell it because they can't figure out how to drive non fuel injected car). 
DanH
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
Hey Dan,
We're only about 90 miles apart. Don't know your work schedule, but I'll be in LR Thursday or Friday (picking up a new TWIC card...).
If you have time, and would like to meet up (with your lil beauty, of course) just PM me.
-Sackett-
We're only about 90 miles apart. Don't know your work schedule, but I'll be in LR Thursday or Friday (picking up a new TWIC card...).
If you have time, and would like to meet up (with your lil beauty, of course) just PM me.
-Sackett-
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
- CM Sackett
- Posts: 52
- Joined: February 18, 2013, 10:06 am
- Location: Arkansas
- Contact:

Re: Just An Introduction... And A Few Pics Of RUBY
BTW Dan... you're not the gentleman who came up to me, as I was parking RUBY, in the parking lot of Gander Mountain (NLR) a few months ago, are you?
The cost of Liberty tends to run very high.
The cost of Apathy... Incalculable.
-CM Sackett-
The cost of Apathy... Incalculable.
-CM Sackett-
