ideal carb for 352

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
therealjoeshmoe
Posts: 1059
Joined: July 24, 2006, 2:18 am
Contact:

ideal carb for 352

Post by therealjoeshmoe »

ok i have a 352 with edelbrock single plane intake bored .30 over mild rv cam. and im running an edelbrock 600cfm carb, but i think its not enough for the motor, what would be the best carb for my truck?
Why fart and waste it when you can burp and taste it!

Image Image Image Image
User avatar
foodstick
Posts: 3364
Joined: March 15, 2006, 6:45 pm

Re: ideal carb for 352

Post by foodstick »

Joeno, I thought you had fallen of the planet !
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: ideal carb for 352

Post by chris401 »

therealjoeshmoe wrote:ok i have a 352 with edelbrock single plane intake bored .30 over mild rv cam. and im running an edelbrock 600cfm carb, but i think its not enough for the motor, what would be the best carb for my truck?
My performance preference would be a Holley 600 dp or a spread bore 650dp.
Chris
User avatar
therealjoeshmoe
Posts: 1059
Joined: July 24, 2006, 2:18 am
Contact:

Re: ideal carb for 352

Post by therealjoeshmoe »

really a 650? mine has a 600 and when i nail it it will fall on its face.. it runs perfect and gets great gas mileage.. but i was thinking it needed at least a 750 but i could be wrong i guess.. any opinions on what would make it stutter when i nail it?? if i hammer it a little slower it will take gas and get with it.
Why fart and waste it when you can burp and taste it!

Image Image Image Image
User avatar
therealjoeshmoe
Posts: 1059
Joined: July 24, 2006, 2:18 am
Contact:

Re: ideal carb for 352

Post by therealjoeshmoe »

foodstick wrote:Joeno, I thought you had fallen of the planet !
nope im still lurking..

this summer prepare to be amazed..

my truck will be back on the road soon...

woohoo.gif
Why fart and waste it when you can burp and taste it!

Image Image Image Image
LM14
Posts: 1755
Joined: August 22, 2009, 10:44 pm
Location: Bloomfield, Iowa
United States of America

Re: ideal carb for 352

Post by LM14 »

It just needs tuning. 600 is right for a 352. I know absolutely nothing about an Edelbrock carb (and don't want to). It's in the transfer circuit between acceleration and cruise, would be an accelerator pump or pump squirter on a Holley, no idea on an Edelbrock.

Size is right, just needs tuning.

SPark
1932 Ford 5 window coupe. 302/C4
1962 8V-390/C6 Unibody Short Bed Soon to be Big Window - The Lincoln that never was
2013 F150 Super Crew Eco Boost 4x4
2015 Ford Edge for the little lady, because she said so!
2007 Mustang GT, 4.6-3V/5 Speed. Only 8680 miles on the clock.

More toys, I need more toys!!!
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: ideal carb for 352

Post by chris401 »

therealjoeshmoe wrote:really a 650? mine has a 600 and when i nail it it will fall on its face.. it runs perfect and gets great gas mileage.. but i was thinking it needed at least a 750 but i could be wrong i guess.. any opinions on what would make it stutter when i nail it?? if i hammer it a little slower it will take gas and get with it.
you described my experience. I ran into that with a LMC gas tank. Large restriction where line goes into tank. Also fuel pumps like pushing to fuel filter not pulling from. Here is a calculator for carb size recommendation.

http://www.wallaceracing.com/intakecfm.php
Chris
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: ideal carb for 352

Post by bruceandersson »

A stutter on acceleration is usually the accelerator pump. You really need a strong shot to handle the increased airflow.
User avatar
therealjoeshmoe
Posts: 1059
Joined: July 24, 2006, 2:18 am
Contact:

Re: ideal carb for 352

Post by therealjoeshmoe »

ok thanks ill check out the accelerater pump and see but i bought the carb new and it has done this ever since..
Why fart and waste it when you can burp and taste it!

Image Image Image Image
William-in-St George
Posts: 579
Joined: December 31, 2009, 5:26 pm
Location: Saint George Utah

Re: ideal carb for 352

Post by William-in-St George »

The pump shot is adjustable on Edelbrock by moving he shot arm down to the bottom hole. Takes about 30 seconds to do. Careful you don't lose the tiny clip.
William-in-St. George
BarnieTrk
Posts: 1448
Joined: July 11, 2007, 2:37 pm
Location: Stanton, Michigan

Re: ideal carb for 352

Post by BarnieTrk »

This might help.
Take a look at the bottom of page 3, Adjustments & Troubleshooting:

http://www.edelbrock.com/automotive_new ... 0/1400.pdf

BarnieTrk 8)
cooter
Posts: 354
Joined: July 12, 2010, 6:45 pm
Location: Edmonton Alberta

Re: ideal carb for 352

Post by cooter »

double check that both squirters are pumping fuel when you hit the throttle, could have a shaving plugging a hole. Also check timing, to much advance will do the same. How fast does the advance come on, might need a stiffer spring in the dizzy
why put off till tommorow what you can put off alltogether
hubbtomdaman
Posts: 12
Joined: July 4, 2013, 11:35 am
United States of America

Re: ideal carb for 352

Post by hubbtomdaman »

Nice Truck
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: ideal carb for 352

Post by chris401 »

therealjoeshmoe wrote:ok i have a 352 with edelbrock single plane intake bored .30 over mild rv cam. and im running an edelbrock 600cfm carb, but i think its not enough for the motor, what would be the best carb for my truck?
Did it work out?
Chris
User avatar
totten
Posts: 284
Joined: January 1, 2012, 8:05 pm
Location: Erlanger,ky
United States of America

Re: ideal carb for 352

Post by totten »

Sounds to me like you need to lean the Edelbrock 600. They are jetted for perforance. Change the rods from the top of carb.Also slow the secondarys down by a spring change. Spring kit has 5 diff. springs. Check your manual or did you get a cd for a manual? Go 1 step lean to test, keep going until you lose driveabily then back up 1 step. You will have to buy rods and jets kit. Good luck,Tony I had to jet a Edelbrock 500 that way. Ran great!
1966 f-100 ranger,red and white,240,cruiseomatic,3.00 gear,a/c.
User avatar
randyr
Posts: 414
Joined: April 26, 2009, 12:58 pm
Location: Santa Monica, CA

Re: ideal carb for 352

Post by randyr »

I used to have the Edelbrock #1406 600cfm carb/Performer intake on a 352 in my '66. Took a while for me to get it to run right. After talking with an Edelbrock tech, he said the carb likes 5.0psi of fuel pressure but the stock Ford fuel pump usually cranks out 8.0psi. I put a fuel pressure regulator on it and cranked it back to 5.0psi. Worked much better but mpg's still sucked! Ultimately jerked it all out and put in EFI 5.0/AOD. It was a good move for me. :D Good luck.
William-in-St George
Posts: 579
Joined: December 31, 2009, 5:26 pm
Location: Saint George Utah

Re: ideal carb for 352

Post by William-in-St George »

All good advice. Are you using a single plane intake? If you are I'd recommend you get a dual plane either stock or aftermarket. I use Edelbrock cause they are really light weight and work. Stock is also good but you need an engine hoist to install it.
William-in-St. George
Post Reply