Driveway gate

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Driveway gate

Post by Blackwaterforge »

Just finished a pair of driveway gates for a customer.
They are heading to the powder coaters Thursday.
Image

Image
If it cain't be fixed with a sledge hammer it must be an electrical problem!
User avatar
F7BIGJOB
Posts: 1379
Joined: March 14, 2010, 7:59 am
Location: West Greenwich, Rhode Island & Providence Plantations
United States of America

Re: Driveway gate

Post by F7BIGJOB »

OUTSTANDING!!Wish you were my neighbor.
F7BIGJOB
-Steve


1965 F-250 4x4 Flareside



ImageImage
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Re: Driveway gate

Post by Blackwaterforge »

F7BIGJOB wrote:OUTSTANDING!!Wish you were my neighbor.
You may be onto something Steve!
A gated Slick owner only subdivision.
Complete with community shop.
Parts trucks in the driveway only means your neighbors will ask about spare parts.
If it cain't be fixed with a sledge hammer it must be an electrical problem!
User avatar
charliemccraney
Posts: 1743
Joined: July 9, 2008, 10:02 pm
Location: Lawrenceville, GA

Re: Driveway gate

Post by charliemccraney »

I've thought about something similar. I think it would be cool for there to be a neighborhood where the residents must own an older vehicle and at least one must be a daily driver. New cars are allowed but they must be out of sight when not in use. And that is it as far as regulations, absolutely no other HOA type bs.

Cool gate!
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
User avatar
PFM-64f100
Posts: 1270
Joined: August 7, 2006, 6:37 pm
Location: Haslet, Texas
Contact:

Re: Driveway gate

Post by PFM-64f100 »

Blackwaterforge wrote:
F7BIGJOB wrote:OUTSTANDING!!Wish you were my neighbor.
You may be onto something Steve!
A gated Slick owner only subdivision.
Complete with community shop.
Parts trucks in the driveway only means your neighbors will ask about spare parts.
We would all have to have a few acreas of land each to store our projects. :)
64 F100 short bed-style side-460-c6-with side toolbox and Dakota Front Suspension
And a 65 CrewCab

Chris W.

The pickups
65 Crew Cab
http://www.purpleflyingmonkey.com/CrewCab/index.html
64 F100
http://www.purpleflyingmonkey.com/1964- ... index.html
The Torino project http://www.purpleflyingmonkey.com/1971- ... eFile.html
User avatar
F7BIGJOB
Posts: 1379
Joined: March 14, 2010, 7:59 am
Location: West Greenwich, Rhode Island & Providence Plantations
United States of America

Re: Driveway gate

Post by F7BIGJOB »

WOW, I just wanted Russell to be my neighbor so he could make me cool stuff, but when I hit it big there will be a huge building full of slicks and and and a place in New England for Slick Stock and and .... :mrgreen: :clap:
F7BIGJOB
-Steve


1965 F-250 4x4 Flareside



ImageImage
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Re: Driveway gate

Post by Blackwaterforge »

Thanks Guys!
If it cain't be fixed with a sledge hammer it must be an electrical problem!
User avatar
bobenhotep
Posts: 911
Joined: January 9, 2007, 4:15 am
Location: Las Cruces, NM
Contact:
United States of America

Re: Driveway gate

Post by bobenhotep »

Those look really good. Makes me want to weld.
For every person with a spark of genius, there are a hundred with ignition trouble

My '63 short wrongbed

"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.

Stuff I added to Hints and tricks

-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix




Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

Image
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Re: Driveway gate

Post by 64 f100 »

Nice gate, only wonder how your going to support it and keep it from sagging. Got to be very heavy. Would have installed two old style steel wagon wheels for it to roll on. There are other ways of taking care of the problem, and I'm sure you've got that thought out, being the craftsman you are.

Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Re: Driveway gate

Post by Blackwaterforge »

64 f100 wrote:Nice gate, only wonder how your going to support it and keep it from sagging. Got to be very heavy. Would have installed two old style steel wagon wheels for it to roll on. There are other ways of taking care of the problem, and I'm sure you've got that thought out, being the craftsman you are.
Sagging is always a concern with gates this heavy. A 500 lb gate 8' long will have a tremendous moment while in operation. They will have automatic openers. They will hang on 6 x 6 x .250 post that are 4' in the ground.
They are in about 30" around of concrete.
I will add two 5 x 5 x .250 post 5' from main post that will also be 4' deep and about 12" around of concrete.
There will be infill panels that match the gate connecting the main post and brace post.
This should be sufficient.
If it cain't be fixed with a sledge hammer it must be an electrical problem!
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Re: Driveway gate

Post by jwh f-100 »

charliemccraney wrote:I've thought about something similar. I think it would be cool for there to be a neighborhood where the residents must own an older vehicle and at least one must be a daily driver. New cars are allowed but they must be out of sight when not in use. And that is it as far as regulations, absolutely no other HOA type bs.

Cool gate!
All new vehicle left on the street will be towed!!

Image
Jason

Beer will change the world.

I don't know how but it will.
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Re: Driveway gate

Post by Blackwaterforge »

jwh f-100 wrote:All new vehicle left on the street will be towed!!
Foreign vehicles scrapped!
If it cain't be fixed with a sledge hammer it must be an electrical problem!
shipwrecked
Posts: 1488
Joined: December 29, 2012, 10:06 pm
Location: Yorktown VA
Contact:
United States of America

Re: Driveway gate

Post by shipwrecked »

I like this thread! screw HOA's but I like your style.
The months may change, but I am always APRIL
'63 F100 Custom Cab 223inline 6, 3speed manual- mostly stock
https://www.youtube.com/coastiereid
Truck has been home in CA,OR,WA,NJ,VA since it's birth in San Jose Jan63
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: Driveway gate

Post by Alan Mclennan »

Lucky customer is all I can say!!! :clap:
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Re: Driveway gate

Post by ezernut9mm »

yeah, nice gate! i wish i had a spread worthy of something like that.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Blackwaterforge
Posts: 893
Joined: March 13, 2008, 9:22 am
Location: Alabama
Contact:
United States of America

Re: Driveway gate

Post by Blackwaterforge »

Installed gates Saturday. No matter how close I measure I am always relieved when they fit.
Image
If it cain't be fixed with a sledge hammer it must be an electrical problem!
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: Driveway gate

Post by Alan Mclennan »

:clap: very nice job!, the only problem with gates is someone has to open and close them if you don`t have electric ones...ours are always open ! :roll:
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
kstones63
Posts: 1504
Joined: April 7, 2007, 10:55 pm
Location: Phoenix, AZ
United States of America

Re: Driveway gate

Post by kstones63 »

Very impressive looking. They looked good before but now better after installed.

Alan, Look into the low voltage gate openers. They aren't that expensive and easy to install. I had them on my gates for years and never had any problem with them. I used them until I built the RV garage on the house.

Kevin
kstones63
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: Driveway gate

Post by Alan Mclennan »

Kev, we looked into them at the beginning, I think we were worried the kids would reverse out at night not see them closed and run into them, plus we don`t have a small access gate people traffic...
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
kstones63
Posts: 1504
Joined: April 7, 2007, 10:55 pm
Location: Phoenix, AZ
United States of America

Re: Driveway gate

Post by kstones63 »

Alan Mclennan wrote:Kev, we looked into them at the beginning, I think we were worried the kids would reverse out at night not see them closed and run into them, plus we don`t have a small access gate people traffic...
That would keep the solicitors out. :lol:
kstones63
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
Post Reply