Loosen rusty bolts?
Loosen rusty bolts?
I found this on Facebook and was going to put it in Hints and Tricks, but I thought I would see if anyone can confirm it first:
PENETRATING OILS
Machinist's Workshop Mag recently published some information on various penetrating oils that I found very interesting. Some of you might appreciate this. The magazine reports they tested penetrates for break-out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged a subjective test of all the popular penetrates with the control being the torque required to remove the nut from a "scientifically rusted" environment.
Penetrating oils------------Average torque to loosen
No oil used--------------516 pounds
WD-40--------------------238 pounds
PB Blaster---------------214 pounds
Liquid Wrench----------127 pounds
Kano Kroil---------------106 pounds
ATF-Acetone mix------53 pounds
The ATF-Acetone mix is a "home brew" mix of 50/50 automatic transmission fluid and acetone. Note this "home brew" released bolts better than any commercial product in this one particular test.
PENETRATING OILS
Machinist's Workshop Mag recently published some information on various penetrating oils that I found very interesting. Some of you might appreciate this. The magazine reports they tested penetrates for break-out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged a subjective test of all the popular penetrates with the control being the torque required to remove the nut from a "scientifically rusted" environment.
Penetrating oils------------Average torque to loosen
No oil used--------------516 pounds
WD-40--------------------238 pounds
PB Blaster---------------214 pounds
Liquid Wrench----------127 pounds
Kano Kroil---------------106 pounds
ATF-Acetone mix------53 pounds
The ATF-Acetone mix is a "home brew" mix of 50/50 automatic transmission fluid and acetone. Note this "home brew" released bolts better than any commercial product in this one particular test.
1965 F100 "Papaw's Pride"
"So I'm working on a cistern inlet valve and the guy hands me a lock nut wrench! I was like 'What is this, a drainpipe slipknot!'" -Flo
"So I'm working on a cistern inlet valve and the guy hands me a lock nut wrench! I was like 'What is this, a drainpipe slipknot!'" -Flo
- bobenhotep
- Posts: 911
- Joined: January 9, 2007, 4:15 am
- Location: Las Cruces, NM
- Contact:

Re: Loosen rusty bolts?
I may try that. My home brew everything oil is a mix of synthetic 2 stroke oil and marvel oil. It turns purple, and it is like poor man's CLP. I can see how the acetone in the mix would make it penetrate like crazy, though.
For every person with a spark of genius, there are a hundred with ignition trouble
My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

My '63 short wrongbed
"The Iron Rhino"
300 I6, 3 spd manual, DS II/ HEI ignition.
Stuff I added to Hints and tricks
-300-6 choke tube repair
-duraspark II/ HEI
-Horn ring contact tube repair
-turn signal indicator fix
Mikhail Kalashnikov and Nikola Tesla are the guys i think of when i build things.

Re: Loosen rusty bolts?
I have seen this list in many places. I do know that ATF and acetone is the best. Has a short shelf life though if not sealed tight.
Chris
64 F100 4X4 Styleside Wrong Bed
on a 74 chassis, 390, C6
A work in progress
64 F100 4X4 Styleside Wrong Bed
on a 74 chassis, 390, C6
A work in progress
Re: Loosen rusty bolts?
Wonder if they used type-F or another type?
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
Re: Loosen rusty bolts?
Diesel works well, too.
Have to try the acetone/ATF blend. Great idea!
Have to try the acetone/ATF blend. Great idea!
Working on a '66 F100 with a '71 240 and the original three-on-the-tree...
Re: Loosen rusty bolts?
I've tried about every penetrating oil or home brew I could make....
But nothing.... NOTHING beats heat
A torch just can't be touched for getting a frozen fastener to break loose
But nothing.... NOTHING beats heat
A torch just can't be touched for getting a frozen fastener to break loose
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: Loosen rusty bolts?
I've been using the acetone/ATF mix for the last year or so. It's cheap and does work.
I keep it in and old squeeze bottle.
It does not mix well, tries to separate.. I shake the bottle I keep it in if it has been on the shelf awhile.
I keep it in and old squeeze bottle.
It does not mix well, tries to separate.. I shake the bottle I keep it in if it has been on the shelf awhile.
Re: Loosen rusty bolts?
So, it should loosen the exhaust studs on my 91 Mustang so I can pull the head without breaking anything? If something breaks I can blame you guy, right?
1965 F100 "Papaw's Pride"
"So I'm working on a cistern inlet valve and the guy hands me a lock nut wrench! I was like 'What is this, a drainpipe slipknot!'" -Flo
"So I'm working on a cistern inlet valve and the guy hands me a lock nut wrench! I was like 'What is this, a drainpipe slipknot!'" -Flo
Re: Loosen rusty bolts?
Another good way is to apply enough heat to melt wax into the threads. An old candle works great.
Tom Williams
Re: Loosen rusty bolts?
I've done that too Tom
Learned it from a guy that restored old hit & miss engines
He said bees wax worked best
Candle is what I have used
Learned it from a guy that restored old hit & miss engines
He said bees wax worked best
Candle is what I have used
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: Loosen rusty bolts?
Another great way is to apply enough heat to cut the damn thing right off... 
Working on a '66 F100 with a '71 240 and the original three-on-the-tree...
