O/T My latest (Ford) acquisition

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Comet. Your vehicle you have a right do what you want.

But you ain't no 'Ford man'. 8)

nosiree.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Garbz

Post by Garbz »

Well seeing as Pro Street is dead, I might as well drop a 526 HEMI in it and fully realise my folly.....Nothing like driving a point home John!

The early hemi in that A will look period and be better than any ford engine other than a SOHC.

GArbz :wink:
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Whether I , with an Acura Car with a Honda Engine, and now a Chrysler car with a Chrysler engine, as well as 3 Ford trucks, all with Ford engines, can be considered a "Ford man" or not is up for debate.:?

Real Ford Men IMO are guys like the Iceman, who has a dozen Fords with Ford motors and nothing else. Or like Farmer Bill... never raced or ran any other brand. :P

Garbz, you'd be leaving that club for sure to do that, that sure as heck ain't no Ford with a Chrysler Hemi in it. The word for those is not for family consumption in here. Period correct is a flatty or a y-block for an 'A' rod.
what we are talking about here is a period mistake. Or a mistake, period.:mrgreen:

One a "Ford Man" would not make. :shock:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Garbz

Post by Garbz »

HAHA....

The one thing i have never been accused of was normal.....LOL

Garbz
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Yeah but JC, a 392 will leave a Y block in the dust! :twisted: I want this thing fast, not pretty. Hot Rod, remember?
I do consider myself a Ford man, I even have a hat! :lol: I also have all kinds of Ford junk in my back yard. And only Ford junk. But I like other things besides Fords too. I just like old junk, some more than others. But by far, most of the cars I've owned have been Fords. And all of the trucks I've owned have been Fords. Well, except for an IH I bought for parts for another project. Never drove it though, except home. POS.
My Slick is rustier than your Slick! :D
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

best o'luck bud :D
it is YOURS, after all.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
reeses66ford
Posts: 130
Joined: August 11, 2006, 7:56 pm
Location: paris, tn

Post by reeses66ford »

i like your car. but dont cross bread it!
reese
castruck_1964
Posts: 643
Joined: August 3, 2006, 3:45 pm
Location: Ramara Ontario
Canada

Post by castruck_1964 »

FORD in a FORD 8) 8) 8)
But like you said it is yours :D
Anything is cool as long as it is NOT :twisted: a SBC. :evil: :evil: :evil:
They are totally boring and totally over used and require absolutely no imagination. :cry:
JC I must be slipping can't believe I just said anything other than a ford in a ford would be ok. :shock: :oops: :? :lol: :wink:
Slicks rule
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6

Ken
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Y'know, I went to a large show 'n shine they have every year in my town. Takes up the entire park downtown, in July.

The only time I stop at a SCB powered rod is to comment on what an A-hole the builder was. Ten seconds max. But this year there was a rat rod there tho, done up so that it would have been perfect with a flathead with straight pipes out the side. It had a SBC.

I railed on for so long at what a @#$%^&^%$#%^& idiot this guy was, that my friends had to physically push me away so I didn't get in a fist fight with the @#$%^&%$ owner.

If a Ford rod doesn't have a Ford motor in it to me, it's the same as if he took a chainsaw and cut it in half from top to bottom, then gave ten orangutans a sledge hammer to beat on it.. Just took something beautiful and WRECKED it, IMO. Chev motor, Toyota motor, Datsun motor, Dodge motor, I still feel the same. $20,000 worth of paint and ostrich leather upholstery? even worse because they could have afforded to put a NICE motor in there.Those owners are just @#$%^ and I have no time for their cars other than to shed a tear over what they wrecked.


But, they own them. Nothing I can do, except not have one iota of respect for them or their pile of Junk.

Sorry, that's the way I feel.

I have allkkinds of respect for Chev cars with Chev Motors, or Dodge cars with Dodge motors. That's where they belong.

But it's yours. do what you want.. that's all I can say.
:roll:
Last edited by Johnny Canuck on September 12, 2006, 8:09 am, edited 1 time in total.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Garbz

Post by Garbz »

I gonna have a custom set of chrome tops made for the first time ya leave your truck at slick stock :evil: ........Sneek em on top of the valve covers :twisted: Of course then i will run and hide for the remainder of the weekend..... :shock:

In FOMOCO Script.... "The heart beat really is Chebby"

HAHAHA

Garbz
User avatar
jakdad
Posts: 1968
Joined: July 18, 2006, 4:07 pm
Location: Katy,Texas

Post by jakdad »

Johnny, you sound like a friend of mine. He says "He would push his Ford 8 miles to work and back home before he rode 10 feet in a %&$!@#$% Chevrolet". Plus it was uphill both ways..................... I tend to agree!!
Jim
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

You guys don't get hot rodding. It's not a resto! I see no difference in putting a different motor in than I do a different tranny, rear end or wheels for that matter. If I was doing a resto, then I could understand. But Ford in a Ford, Chevy in a Chevy, Dodge in Dodge completely misses what hot rodding is about. Hot rodders don't care what the name on the valve covers say. They care who crosses the finish line first or who walks away with the pink slip. Hot rodders would sell their soul to the devil to knock a tenth of a second off their ET. To lose a race, but look pretty doing it has no place in hot rodding. That's what Customs are for. After Chevy brought out the 263 OHV V8, it practically made the flat head obsolete to the drag racer (although may flat headers remained competitive for years, until the Hemi started to get popular). Don't get me wrong, I love a tricked out flat head. But only for a hot rod from an era prior to 1955 or so. I'm targeting 1957-59. And unfortunately Ford had very little to offer during that period (Y blocks were never serious drag motors). Not until the R code 427 came out did Ford finally pull their heads out. But I don't want an early 60's hot rod. It has a completely different look than I'm after.
To put a Ford in a Ford just for the sake of allegiance don't win me any races. Hot rodding is all about making it go fast.
My Slick is rustier than your Slick! :D
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

He's right. In the late 50's the Chrysler 392 hemi and Buick nailhead were very sought after by hot rodders, more so than flatties and y-blocks. Rodders used the best parts available, regardless of brand. Since Comet is looking to do a period-correct piece the 392 is an appropriate engine choice, like it or not. I think it'll be cool. And fast... :shock:

I'd be a lot less impressed if he chose an SBC. The thing that bugs me about that is it's just so common. Like a default setting. And you see them in everything. It just seems to be a lack of imagination. At least the more traditional options, like the nailhead or hemi, are a bit exotic.

That being said, if my next project turns out to be a Model A hot rod, and I suspect it will, I'll be putting a Ford motor in it. A y-block or flattie, most likely. Maybe even a six-cylinder to be really different. Though these days the y-block or flattie would stand out well enough in the crowd...

Good luck with it, Comet! Keep us posted.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

The part that neither of you seem to get is, in the fifties, they were driving Fords because they were the most common and cheap vehicle around at the time they bought it. They probably picked up thier grandpa's or uncle's old Model A or B with a four banger and drove it until they could afford a Flathead, preferably, then, a Mercury Flathead, to make it go faster.

In the late late 50's early sixties, when junked cars with SBC's started becoming more common, they could get the lighter than a Y block and more powerful than a flathead SBC. They couldn't afford another motor AND a car, so they stuck in their grandpas old Model A.

The situation was MUCH different than today where we almost all own multiple cars. These things were done primarily for economic reasons.

Much different than the reasons offered in this thread. To PURPOSELY CHOOSE a Ford car to defile is in my mind, total slander. You could have picked from literally hundereds of other car brands, INCLUDING Dodge, to stick a Dodge motor in and make it go fast. You surely didn't buy that 'A' from your grandpa and drive it a few years, unitl you could afford to fix it up.
and this>>
Comet wrote:You guys don't get hot rodding. ............
-I'm targeting 1957-59.
-But I don't want an early 60's hot rod. It has a completely different look than I'm after.
- Hot rodding is all about making it go fast.
sounds like you are all about making it look a certain way before going fast to me.

Fords have been defiled ENOUGH, IMO, for the above and other reasons. There's no need to continue this practice anymore. You want a Fast motor? Stick in a fast Ford motor. Why pick a period to emulate that defiled Fords? Bad choice in periods I would say.
Last edited by Johnny Canuck on September 12, 2006, 7:09 pm, edited 1 time in total.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

I had my truck at the "Hotrod Hoedown" last weekend in Wilmington, DE. from prob. 500 cars or more, from what I saw, flathead Fords have definitely made a resurgance in hotrods. There was a few hemi's and still alot of sbc. Seen alot of cool rides, But I had the only uni! Comet, it's yours do what you want.
Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Johnny Canuck wrote:Why pick a period to emulate that defiled Fords? Bad choice in periods I would say.
That time period was chosen for a few reasons. First, as stated by 66fordtrucknut, flatheads have had a big resurgence. Traditional hot rodding is on fire right now and everyone wants a pre-war, or early post war hot rod. I want something a little different, yet still traditional.
The late 50's is when hot rodding really hit it's stride with the birth of rock and roll and the growth of the NHRA and Hot Rod magazine and many other smaller mags like Honk and Hop Up. It's a time in American history when innocence and family were still very strong. After Nov. 22, 1963 that changed forever. The muscle car also changed hot rodding and it almost died as a result.
But most importantly, my father had a Model A he hot rodded during that time. And while I'm not trying to make an exact copy of that car, I am trying to capture that same spirit. My parents have been married for 43 years and they were dating when he had that car. They are thrilled to see me doing this and can't wait for their first ride together to go get a burger at the same place they used to over 4 decades ago. So there is a lot of sentiment for me, despite not being born yet. I've always been fascinated by the late 50's. Cars, culture, movies, music, etc. This is just an extension of that I guess.
And Big M, I agree with your comments.
My Slick is rustier than your Slick! :D
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Well don't say I didn't warn ya when the Washington version of this guy comes along:
Johnny Canuck wrote: I railed on for so long at what a @#$%^&^%$#%^& idiot this guy was, that my friends had to physically push me away so I didn't get in a fist fight with the @#$%^&%$ owner.
There ARE more than one of us y'know.

so.
best o'luck bud :D
it is YOURS, after all.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

jakdad wrote:Johnny, you sound like a friend of mine. He says "He would push his Ford 8 miles to work and back home before he rode 10 feet in a %&$!@#$% Chevrolet". Plus it was uphill both ways..................... I tend to agree!!
Jackdad.. you don't quite have me figured. I have owned 3 Chev trucks, I was off Fords after I had 2 dog '79 Fords that almost put me off Fords forever. '79 was definitely the year in the modern era the got ford the "Fix or Repair Daily" monker.. both my Capri RS and my 79 4x4 shorty with a 351M were crap vehicles to say the least.

So I had, in order, a '78 GMC 2wd that was an old company truck... still running the last time I saw it with over 300,000 miles on it, then an '81 4x4 Silverado that was the most luxurious truck I have ever owned, the only one that has had AC and power door locks for sure. Then an S15 GMC 4x4 extended cab with a 2.8 V6 and a 5 speed. I would still be driving that truck, if I hadn't had to sell it because I could not fit my twins' car seats in the back.
I have always been about the balance between economy and power, and that truck with the 5 gear was hella fun to drive, and for a 4x4 it was downright CHEAP on gas.

I eventually was given a beat '78 Ford pickup from my dad's work at the brewery, which turned out to be the best truck I have ever owned, the ONE thing that brought me back to Fords, because besides those trucks I had a Chev Malibu with a V6 and a Pontiac 6000 with a V6 too.

So, I am NOT all about Fords. Not one of those GM's had a Nissan Motor. Or a Dodge Motor. and Not one of my Fords does or ever will either.

I am against cross- bred Bastards. Not Chevs. Putting a Chev motor in a Ford makes it junk IMO.
Ebay buyers apparently agree.

JC
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

Johnny Canuck wrote:The part that neither of you seem to get is, in the fifties, they were driving Fords because they were the most common and cheap vehicle around at the time they bought it. They probably picked up thier grandpa's or uncle's old Model A or B with a four banger and drove it until they could afford a Flathead, preferably, then, a Mercury Flathead, to make it go faster.
This is true. I agree 100%. The flathead was the first of the great hot rod mills, and Model A's were plentiful at the time.
Johnny Canuck wrote:In the late late 50's early sixties, when junked cars with SBC's started becoming more common, they could get the lighter than a Y block and more powerful than a flathead SBC. They couldn't afford another motor AND a car, so they stuck in their grandpas old Model A.
Around this time there would also have been plenty of junked hemi-equipped Imperials available. I don't believe Ford had anything that could compete at the time, at least in terms of displacement.
Johnny Canuck wrote:The situation was MUCH different than today where we almost all own multiple cars. These things were done primarily for economic reasons.

Much different than the reasons offered in this thread. To PURPOSELY CHOOSE a Ford car to defile is in my mind, total slander.
You're right on about your "economic reasons" statement, JC. Hot rodders wanted to go fast for cheap. A true traditional hot rod is one built with parts scrounged from junkyards, like 40's Ford spindles, Buick finned drums, and so on. Of course aesthetics played a role as well so certain parts were chosen to achieve a balance of looks and performance.

That being said, it does puzzle me that one doesn't see more Dodge or GM hot rods. I for one would like to see more. I, like you, have been known to turn up my nose at an SBC-powered Ford. I guess I don't mind it so much in a true period piece. I really like the traditional stuff. Something about the resourcefulness involved, I guess. Still, I would rather do something inspired by tradition, rather than a 100% accurate reproduction of a 50's rod. Mainly because I couldn't bring myself to put anything other than a Ford in a Ford. But to each his own...

The thing that really bugs me is the guys who use completely random off-brand drivetrains. Like a 305 or something. :?
User avatar
Jarrod
Posts: 361
Joined: July 17, 2006, 3:11 pm
Location: California

Post by Jarrod »

Ok I can't help myself here, I have to chime in. For the most part I think a ford should power a ford, chevy for a chevy, etc. However, the reason the SBC has always been a popular choice originally was not price, dimentionally they are almost the exact size width wise and length wise as the flat head, so it was easy to just swap and voila get more power. Today, they suck period. I get kinda mad when I see a SBC in anything other than a chevy. Hell even in a chevy it kinda lacks originality, shove something else in there, I love seeing a nova with a ginormous Rat motor between the fenders. On the other hand, a 392 hemi just plain works in a fifties hotrod. The first hotrod I ever saw in person was a black 32 highboy with a supercharged 392 hemi, tuck an roll interior and friggen huge dirt track tires in the back. It looked mean almost cartoon like. I loved the fact that the heads stuck out past where the hood sides could be so there was just the body, no hood, no fenders. Just a big motor, seats, steering wheel, and tires. It was the epitome of get in, sit down shut up and hold on :mrgreen: . There are excetions to every rule and this is one of them. Besides to those that feel that putting a hemi in a ford is bastardizing the car, that mentality is the same as the people that felt that hotrodding was ruining a car and that Rock and Roll was devil music :twisted: .

Cheers
Cheers,
Jarrod
Post Reply